Merge pull request #8792 from esphome/bump-2025.5.0b2

2025.5.0b2

.github/workflows/release.yml

@@ -56,16 +56,14 @@ jobs:
         uses: actions/setup-python@v5.6.0
         with:
           python-version: "3.x"
-      - name: Set up python environment
-        env:
-          ESPHOME_NO_VENV: 1
-        run: script/setup
       - name: Build
         run: |-
           pip3 install build
           python3 -m build
       - name: Publish
         uses: pypa/gh-action-pypi-publish@v1.12.4
+        with:
+          skip-existing: true
 
   deploy-docker:
     name: Build ESPHome ${{ matrix.platform.arch }}

CODEOWNERS

@@ -282,6 +282,7 @@ esphome/components/microphone/* @jesserockz @kahrendt
 esphome/components/mics_4514/* @jesserockz
 esphome/components/midea/* @dudanov
 esphome/components/midea_ir/* @dudanov
+esphome/components/mipi_spi/* @clydebarrow
 esphome/components/mitsubishi/* @RubyBailey
 esphome/components/mixer/speaker/* @kahrendt
 esphome/components/mlx90393/* @functionpointer

esphome/components/anova/climate.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 from esphome.components import ble_client, climate
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_UNIT_OF_MEASUREMENT
+from esphome.const import CONF_UNIT_OF_MEASUREMENT
 
 UNITS = {
     "f": "f",
@@ -17,9 +17,9 @@ Anova = anova_ns.class_(
 )
 
 CONFIG_SCHEMA = (
-    climate.CLIMATE_SCHEMA.extend(
+    climate.climate_schema(Anova)
+    .extend(
         {
-            cv.GenerateID(): cv.declare_id(Anova),
             cv.Required(CONF_UNIT_OF_MEASUREMENT): cv.enum(UNITS),
         }
     )
@@ -29,8 +29,7 @@ CONFIG_SCHEMA = (
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
-    await climate.register_climate(var, config)
     await ble_client.register_ble_node(var, config)
     cg.add(var.set_unit_of_measurement(config[CONF_UNIT_OF_MEASUREMENT]))

esphome/components/ballu/climate.py

@@ -1,7 +1,5 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 CODEOWNERS = ["@bazuchan"]
@@ -9,13 +7,8 @@ CODEOWNERS = ["@bazuchan"]
 ballu_ns = cg.esphome_ns.namespace("ballu")
 BalluClimate = ballu_ns.class_("BalluClimate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(BalluClimate),
-    }
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(BalluClimate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/bang_bang/climate.py

@@ -9,7 +9,6 @@ from esphome.const import (
     CONF_DEFAULT_TARGET_TEMPERATURE_LOW,
     CONF_HEAT_ACTION,
     CONF_HUMIDITY_SENSOR,
-    CONF_ID,
     CONF_IDLE_ACTION,
     CONF_SENSOR,
 )
@@ -19,9 +18,9 @@ BangBangClimate = bang_bang_ns.class_("BangBangClimate", climate.Climate, cg.Com
 BangBangClimateTargetTempConfig = bang_bang_ns.struct("BangBangClimateTargetTempConfig")
 
 CONFIG_SCHEMA = cv.All(
-    climate.CLIMATE_SCHEMA.extend(
+    climate.climate_schema(BangBangClimate)
+    .extend(
         {
-            cv.GenerateID(): cv.declare_id(BangBangClimate),
             cv.Required(CONF_SENSOR): cv.use_id(sensor.Sensor),
             cv.Optional(CONF_HUMIDITY_SENSOR): cv.use_id(sensor.Sensor),
             cv.Required(CONF_DEFAULT_TARGET_TEMPERATURE_LOW): cv.temperature,
@@ -36,15 +35,15 @@ CONFIG_SCHEMA = cv.All(
                 }
             ),
         }
-    ).extend(cv.COMPONENT_SCHEMA),
+    )
+    .extend(cv.COMPONENT_SCHEMA),
     cv.has_at_least_one_key(CONF_COOL_ACTION, CONF_HEAT_ACTION),
 )
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
-    await climate.register_climate(var, config)
 
     sens = await cg.get_variable(config[CONF_SENSOR])
     cg.add(var.set_sensor(sens))

esphome/components/bedjet/climate/__init__.py

@@ -1,11 +1,8 @@
-import logging
-
 import esphome.codegen as cg
 from esphome.components import ble_client, climate
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_HEAT_MODE,
-    CONF_ID,
     CONF_RECEIVE_TIMEOUT,
     CONF_TEMPERATURE_SOURCE,
     CONF_TIME_ID,
@@ -13,7 +10,6 @@ from esphome.const import (
 
 from .. import BEDJET_CLIENT_SCHEMA, bedjet_ns, register_bedjet_child
 
-_LOGGER = logging.getLogger(__name__)
 CODEOWNERS = ["@jhansche"]
 DEPENDENCIES = ["bedjet"]
 
@@ -30,9 +26,9 @@ BEDJET_TEMPERATURE_SOURCES = {
 }
 
 CONFIG_SCHEMA = (
-    climate.CLIMATE_SCHEMA.extend(
+    climate.climate_schema(BedJetClimate)
+    .extend(
         {
-            cv.GenerateID(): cv.declare_id(BedJetClimate),
             cv.Optional(CONF_HEAT_MODE, default="heat"): cv.enum(
                 BEDJET_HEAT_MODES, lower=True
             ),
@@ -63,9 +59,8 @@ CONFIG_SCHEMA = (
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
-    await climate.register_climate(var, config)
     await register_bedjet_child(var, config)
 
     cg.add(var.set_heating_mode(config[CONF_HEAT_MODE]))

esphome/components/bedjet/fan/__init__.py

@@ -1,31 +1,22 @@
-import logging
-
 import esphome.codegen as cg
 from esphome.components import fan
 import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 from .. import BEDJET_CLIENT_SCHEMA, bedjet_ns, register_bedjet_child
 
-_LOGGER = logging.getLogger(__name__)
 CODEOWNERS = ["@jhansche"]
 DEPENDENCIES = ["bedjet"]
 
 BedJetFan = bedjet_ns.class_("BedJetFan", fan.Fan, cg.PollingComponent)
 
 CONFIG_SCHEMA = (
-    fan.FAN_SCHEMA.extend(
-        {
-            cv.GenerateID(): cv.declare_id(BedJetFan),
-        }
-    )
+    fan.fan_schema(BedJetFan)
     .extend(cv.polling_component_schema("60s"))
     .extend(BEDJET_CLIENT_SCHEMA)
 )
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await fan.new_fan(config)
     await cg.register_component(var, config)
-    await fan.register_fan(var, config)
     await register_bedjet_child(var, config)

esphome/components/binary/fan/__init__.py

@@ -1,31 +1,28 @@
 import esphome.codegen as cg
 from esphome.components import fan, output
 import esphome.config_validation as cv
-from esphome.const import (
-    CONF_DIRECTION_OUTPUT,
-    CONF_OSCILLATION_OUTPUT,
-    CONF_OUTPUT,
-    CONF_OUTPUT_ID,
-)
+from esphome.const import CONF_DIRECTION_OUTPUT, CONF_OSCILLATION_OUTPUT, CONF_OUTPUT
 
 from .. import binary_ns
 
 BinaryFan = binary_ns.class_("BinaryFan", fan.Fan, cg.Component)
 
-CONFIG_SCHEMA = fan.FAN_SCHEMA.extend(
-    {
-        cv.GenerateID(CONF_OUTPUT_ID): cv.declare_id(BinaryFan),
-        cv.Required(CONF_OUTPUT): cv.use_id(output.BinaryOutput),
-        cv.Optional(CONF_DIRECTION_OUTPUT): cv.use_id(output.BinaryOutput),
-        cv.Optional(CONF_OSCILLATION_OUTPUT): cv.use_id(output.BinaryOutput),
-    }
-).extend(cv.COMPONENT_SCHEMA)
+CONFIG_SCHEMA = (
+    fan.fan_schema(BinaryFan)
+    .extend(
+        {
+            cv.Required(CONF_OUTPUT): cv.use_id(output.BinaryOutput),
+            cv.Optional(CONF_DIRECTION_OUTPUT): cv.use_id(output.BinaryOutput),
+            cv.Optional(CONF_OSCILLATION_OUTPUT): cv.use_id(output.BinaryOutput),
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_OUTPUT_ID])
+    var = await fan.new_fan(config)
     await cg.register_component(var, config)
-    await fan.register_fan(var, config)
 
     output_ = await cg.get_variable(config[CONF_OUTPUT])
     cg.add(var.set_output(output_))

esphome/components/bluetooth_proxy/bluetooth_proxy.cpp

@@ -51,14 +51,19 @@ bool BluetoothProxy::parse_device(const esp32_ble_tracker::ESPBTDevice &device)
   return true;
 }
 
-// Static buffer to store advertisements between batches
-static constexpr size_t MAX_BATCH_SIZE = 8;
-static std::vector<api::BluetoothLERawAdvertisement> batch_buffer;
+static constexpr size_t FLUSH_BATCH_SIZE = 8;
+static std::vector<api::BluetoothLERawAdvertisement> &get_batch_buffer() {
+  static std::vector<api::BluetoothLERawAdvertisement> batch_buffer;
+  return batch_buffer;
+}
 
 bool BluetoothProxy::parse_devices(esp_ble_gap_cb_param_t::ble_scan_result_evt_param *advertisements, size_t count) {
   if (!api::global_api_server->is_connected() || this->api_connection_ == nullptr || !this->raw_advertisements_)
     return false;
 
+  // Get the batch buffer reference
+  auto &batch_buffer = get_batch_buffer();
+
   // Reserve additional capacity if needed
   size_t new_size = batch_buffer.size() + count;
   if (batch_buffer.capacity() < new_size) {
@@ -83,7 +88,7 @@ bool BluetoothProxy::parse_devices(esp_ble_gap_cb_param_t::ble_scan_result_evt_p
 
   // Only send if we've accumulated a good batch size to maximize batching efficiency
   // https://github.com/esphome/backlog/issues/21
-  if (batch_buffer.size() >= MAX_BATCH_SIZE) {
+  if (batch_buffer.size() >= FLUSH_BATCH_SIZE) {
     this->flush_pending_advertisements();
   }
 
@@ -91,6 +96,7 @@ bool BluetoothProxy::parse_devices(esp_ble_gap_cb_param_t::ble_scan_result_evt_p
 }
 
 void BluetoothProxy::flush_pending_advertisements() {
+  auto &batch_buffer = get_batch_buffer();
   if (batch_buffer.empty() || !api::global_api_server->is_connected() || this->api_connection_ == nullptr)
     return;
 

esphome/components/climate_ir/__init__.py

@@ -1,7 +1,13 @@
+import logging
+
+from esphome import core
 import esphome.codegen as cg
 from esphome.components import climate, remote_base, sensor
 import esphome.config_validation as cv
-from esphome.const import CONF_SENSOR, CONF_SUPPORTS_COOL, CONF_SUPPORTS_HEAT
+from esphome.const import CONF_ID, CONF_SENSOR, CONF_SUPPORTS_COOL, CONF_SUPPORTS_HEAT
+from esphome.cpp_generator import MockObjClass
+
+_LOGGER = logging.getLogger(__name__)
 
 DEPENDENCIES = ["remote_transmitter"]
 AUTO_LOAD = ["sensor", "remote_base"]
@@ -16,30 +22,58 @@ ClimateIR = climate_ir_ns.class_(
     remote_base.RemoteTransmittable,
 )
 
-CLIMATE_IR_SCHEMA = (
-    climate.CLIMATE_SCHEMA.extend(
+
+def climate_ir_schema(
+    class_: MockObjClass,
+) -> cv.Schema:
+    return (
+        climate.climate_schema(class_)
+        .extend(
+            {
+                cv.Optional(CONF_SUPPORTS_COOL, default=True): cv.boolean,
+                cv.Optional(CONF_SUPPORTS_HEAT, default=True): cv.boolean,
+                cv.Optional(CONF_SENSOR): cv.use_id(sensor.Sensor),
+            }
+        )
+        .extend(cv.COMPONENT_SCHEMA)
+        .extend(remote_base.REMOTE_TRANSMITTABLE_SCHEMA)
+    )
+
+
+def climare_ir_with_receiver_schema(
+    class_: MockObjClass,
+) -> cv.Schema:
+    return climate_ir_schema(class_).extend(
         {
-            cv.Optional(CONF_SUPPORTS_COOL, default=True): cv.boolean,
-            cv.Optional(CONF_SUPPORTS_HEAT, default=True): cv.boolean,
-            cv.Optional(CONF_SENSOR): cv.use_id(sensor.Sensor),
+            cv.Optional(remote_base.CONF_RECEIVER_ID): cv.use_id(
+                remote_base.RemoteReceiverBase
+            ),
         }
     )
-    .extend(cv.COMPONENT_SCHEMA)
-    .extend(remote_base.REMOTE_TRANSMITTABLE_SCHEMA)
-)
 
-CLIMATE_IR_WITH_RECEIVER_SCHEMA = CLIMATE_IR_SCHEMA.extend(
-    {
-        cv.Optional(remote_base.CONF_RECEIVER_ID): cv.use_id(
-            remote_base.RemoteReceiverBase
-        ),
-    }
-)
+
+# Remove before 2025.11.0
+def deprecated_schema_constant(config):
+    type: str = "unknown"
+    if (id := config.get(CONF_ID)) is not None and isinstance(id, core.ID):
+        type = str(id.type).split("::", maxsplit=1)[0]
+    _LOGGER.warning(
+        "Using `climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA` is deprecated and will be removed in ESPHome 2025.11.0. "
+        "Please use `climate_ir.climare_ir_with_receiver_schema(...)` instead. "
+        "If you are seeing this, report an issue to the external_component author and ask them to update it. "
+        "https://developers.esphome.io/blog/2025/05/14/_schema-deprecations/. "
+        "Component using this schema: %s",
+        type,
+    )
+    return config
+
+
+CLIMATE_IR_WITH_RECEIVER_SCHEMA = climare_ir_with_receiver_schema(ClimateIR)
+CLIMATE_IR_WITH_RECEIVER_SCHEMA.add_extra(deprecated_schema_constant)
 
 
 async def register_climate_ir(var, config):
     await cg.register_component(var, config)
-    await climate.register_climate(var, config)
     await remote_base.register_transmittable(var, config)
     cg.add(var.set_supports_cool(config[CONF_SUPPORTS_COOL]))
     cg.add(var.set_supports_heat(config[CONF_SUPPORTS_HEAT]))
@@ -48,3 +82,9 @@ async def register_climate_ir(var, config):
     if sensor_id := config.get(CONF_SENSOR):
         sens = await cg.get_variable(sensor_id)
         cg.add(var.set_sensor(sens))
+
+
+async def new_climate_ir(config, *args):
+    var = await climate.new_climate(config, *args)
+    await register_climate_ir(var, config)
+    return var

esphome/components/climate_ir_lg/climate.py

@@ -1,7 +1,6 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
 import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 
@@ -14,9 +13,8 @@ CONF_BIT_HIGH = "bit_high"
 CONF_BIT_ONE_LOW = "bit_one_low"
 CONF_BIT_ZERO_LOW = "bit_zero_low"
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(LgIrClimate).extend(
     {
-        cv.GenerateID(): cv.declare_id(LgIrClimate),
         cv.Optional(
             CONF_HEADER_HIGH, default="8000us"
         ): cv.positive_time_period_microseconds,
@@ -37,8 +35,7 @@ CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    var = await climate_ir.new_climate_ir(config)
 
     cg.add(var.set_header_high(config[CONF_HEADER_HIGH]))
     cg.add(var.set_header_low(config[CONF_HEADER_LOW]))

esphome/components/coolix/climate.py

@@ -1,7 +1,5 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 CODEOWNERS = ["@glmnet"]
@@ -9,13 +7,8 @@ CODEOWNERS = ["@glmnet"]
 coolix_ns = cg.esphome_ns.namespace("coolix")
 CoolixClimate = coolix_ns.class_("CoolixClimate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(CoolixClimate),
-    }
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(CoolixClimate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/copy/fan/__init__.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 from esphome.components import fan
 import esphome.config_validation as cv
-from esphome.const import CONF_ENTITY_CATEGORY, CONF_ICON, CONF_ID, CONF_SOURCE_ID
+from esphome.const import CONF_ENTITY_CATEGORY, CONF_ICON, CONF_SOURCE_ID
 from esphome.core.entity_helpers import inherit_property_from
 
 from .. import copy_ns
@@ -9,12 +9,15 @@ from .. import copy_ns
 CopyFan = copy_ns.class_("CopyFan", fan.Fan, cg.Component)
 
 
-CONFIG_SCHEMA = fan.FAN_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(CopyFan),
-        cv.Required(CONF_SOURCE_ID): cv.use_id(fan.Fan),
-    }
-).extend(cv.COMPONENT_SCHEMA)
+CONFIG_SCHEMA = (
+    fan.fan_schema(CopyFan)
+    .extend(
+        {
+            cv.Required(CONF_SOURCE_ID): cv.use_id(fan.Fan),
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+)
 
 FINAL_VALIDATE_SCHEMA = cv.All(
     inherit_property_from(CONF_ICON, CONF_SOURCE_ID),
@@ -23,8 +26,7 @@ FINAL_VALIDATE_SCHEMA = cv.All(
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await fan.register_fan(var, config)
+    var = await fan.new_fan(config)
     await cg.register_component(var, config)
 
     source = await cg.get_variable(config[CONF_SOURCE_ID])

esphome/components/daikin/climate.py

@@ -1,20 +1,13 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 
 daikin_ns = cg.esphome_ns.namespace("daikin")
 DaikinClimate = daikin_ns.class_("DaikinClimate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(DaikinClimate),
-    }
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(DaikinClimate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/daikin_arc/climate.py

@@ -1,18 +1,13 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 
 daikin_arc_ns = cg.esphome_ns.namespace("daikin_arc")
 DaikinArcClimate = daikin_arc_ns.class_("DaikinArcClimate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {cv.GenerateID(): cv.declare_id(DaikinArcClimate)}
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(DaikinArcClimate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/daikin_brc/climate.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_USE_FAHRENHEIT
+from esphome.const import CONF_USE_FAHRENHEIT
 
 AUTO_LOAD = ["climate_ir"]
 
@@ -9,15 +9,13 @@ daikin_brc_ns = cg.esphome_ns.namespace("daikin_brc")
 DaikinBrcClimate = daikin_brc_ns.class_("DaikinBrcClimate", climate_ir.ClimateIR)
 
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(DaikinBrcClimate).extend(
     {
-        cv.GenerateID(): cv.declare_id(DaikinBrcClimate),
         cv.Optional(CONF_USE_FAHRENHEIT, default=False): cv.boolean,
     }
 )
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    var = await climate_ir.new_climate_ir(config)
     cg.add(var.set_fahrenheit(config[CONF_USE_FAHRENHEIT]))

esphome/components/delonghi/climate.py

@@ -1,20 +1,13 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 
 delonghi_ns = cg.esphome_ns.namespace("delonghi")
 DelonghiClimate = delonghi_ns.class_("DelonghiClimate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(DelonghiClimate),
-    }
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(DelonghiClimate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/emmeti/climate.py

@@ -1,7 +1,5 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 CODEOWNERS = ["@E440QF"]
 AUTO_LOAD = ["climate_ir"]
@@ -9,13 +7,8 @@ AUTO_LOAD = ["climate_ir"]
 emmeti_ns = cg.esphome_ns.namespace("emmeti")
 EmmetiClimate = emmeti_ns.class_("EmmetiClimate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(EmmetiClimate),
-    }
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(EmmetiClimate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/esp32/gpio.cpp

@@ -2,42 +2,66 @@
 
 #include "gpio.h"
 #include "esphome/core/log.h"
+#include "driver/gpio.h"
+#include "driver/rtc_io.h"
+#include "hal/gpio_hal.h"
+#include "soc/soc_caps.h"
+#include "soc/gpio_periph.h"
 #include <cinttypes>
 
+#if (SOC_RTCIO_PIN_COUNT > 0)
+#include "hal/rtc_io_hal.h"
+#endif
+
+#ifndef SOC_GPIO_SUPPORT_RTC_INDEPENDENT
+#define SOC_GPIO_SUPPORT_RTC_INDEPENDENT 0  // NOLINT
+#endif
+
 namespace esphome {
 namespace esp32 {
 
 static const char *const TAG = "esp32";
 
+static const gpio_hal_context_t GPIO_HAL = {.dev = GPIO_HAL_GET_HW(GPIO_PORT_0)};
+
 bool ESP32InternalGPIOPin::isr_service_installed = false;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
 
-static gpio_mode_t IRAM_ATTR flags_to_mode(gpio::Flags flags) {
+static gpio_mode_t flags_to_mode(gpio::Flags flags) {
   flags = (gpio::Flags)(flags & ~(gpio::FLAG_PULLUP | gpio::FLAG_PULLDOWN));
-  if (flags == gpio::FLAG_INPUT) {
+  if (flags == gpio::FLAG_INPUT)
     return GPIO_MODE_INPUT;
-  } else if (flags == gpio::FLAG_OUTPUT) {
+  if (flags == gpio::FLAG_OUTPUT)
     return GPIO_MODE_OUTPUT;
-  } else if (flags == (gpio::FLAG_OUTPUT | gpio::FLAG_OPEN_DRAIN)) {
+  if (flags == (gpio::FLAG_OUTPUT | gpio::FLAG_OPEN_DRAIN))
     return GPIO_MODE_OUTPUT_OD;
-  } else if (flags == (gpio::FLAG_INPUT | gpio::FLAG_OUTPUT | gpio::FLAG_OPEN_DRAIN)) {
+  if (flags == (gpio::FLAG_INPUT | gpio::FLAG_OUTPUT | gpio::FLAG_OPEN_DRAIN))
     return GPIO_MODE_INPUT_OUTPUT_OD;
-  } else if (flags == (gpio::FLAG_INPUT | gpio::FLAG_OUTPUT)) {
+  if (flags == (gpio::FLAG_INPUT | gpio::FLAG_OUTPUT))
     return GPIO_MODE_INPUT_OUTPUT;
-  } else {
-    // unsupported or gpio::FLAG_NONE
-    return GPIO_MODE_DISABLE;
-  }
+  // unsupported or gpio::FLAG_NONE
+  return GPIO_MODE_DISABLE;
 }
 
 struct ISRPinArg {
   gpio_num_t pin;
+  gpio::Flags flags;
   bool inverted;
+#if defined(USE_ESP32_VARIANT_ESP32)
+  bool use_rtc;
+  int rtc_pin;
+#endif
 };
 
 ISRInternalGPIOPin ESP32InternalGPIOPin::to_isr() const {
   auto *arg = new ISRPinArg{};  // NOLINT(cppcoreguidelines-owning-memory)
-  arg->pin = pin_;
+  arg->pin = this->pin_;
+  arg->flags = gpio::FLAG_NONE;
   arg->inverted = inverted_;
+#if defined(USE_ESP32_VARIANT_ESP32)
+  arg->use_rtc = rtc_gpio_is_valid_gpio(this->pin_);
+  if (arg->use_rtc)
+    arg->rtc_pin = rtc_io_number_get(this->pin_);
+#endif
   return ISRInternalGPIOPin((void *) arg);
 }
 
@@ -90,6 +114,7 @@ void ESP32InternalGPIOPin::setup() {
   if (flags_ & gpio::FLAG_OUTPUT) {
     gpio_set_drive_capability(pin_, drive_strength_);
   }
+  ESP_LOGD(TAG, "rtc: %d", SOC_GPIO_SUPPORT_RTC_INDEPENDENT);
 }
 
 void ESP32InternalGPIOPin::pin_mode(gpio::Flags flags) {
@@ -115,28 +140,65 @@ void ESP32InternalGPIOPin::detach_interrupt() const { gpio_intr_disable(pin_); }
 using namespace esp32;
 
 bool IRAM_ATTR ISRInternalGPIOPin::digital_read() {
-  auto *arg = reinterpret_cast<ISRPinArg *>(arg_);
-  return bool(gpio_get_level(arg->pin)) != arg->inverted;
+  auto *arg = reinterpret_cast<ISRPinArg *>(this->arg_);
+  return bool(gpio_hal_get_level(&GPIO_HAL, arg->pin)) != arg->inverted;
 }
+
 void IRAM_ATTR ISRInternalGPIOPin::digital_write(bool value) {
-  auto *arg = reinterpret_cast<ISRPinArg *>(arg_);
-  gpio_set_level(arg->pin, value != arg->inverted ? 1 : 0);
+  auto *arg = reinterpret_cast<ISRPinArg *>(this->arg_);
+  gpio_hal_set_level(&GPIO_HAL, arg->pin, value != arg->inverted);
 }
+
 void IRAM_ATTR ISRInternalGPIOPin::clear_interrupt() {
   // not supported
 }
+
 void IRAM_ATTR ISRInternalGPIOPin::pin_mode(gpio::Flags flags) {
   auto *arg = reinterpret_cast<ISRPinArg *>(arg_);
-  gpio_set_direction(arg->pin, flags_to_mode(flags));
-  gpio_pull_mode_t pull_mode = GPIO_FLOATING;
-  if ((flags & gpio::FLAG_PULLUP) && (flags & gpio::FLAG_PULLDOWN)) {
-    pull_mode = GPIO_PULLUP_PULLDOWN;
-  } else if (flags & gpio::FLAG_PULLUP) {
-    pull_mode = GPIO_PULLUP_ONLY;
-  } else if (flags & gpio::FLAG_PULLDOWN) {
-    pull_mode = GPIO_PULLDOWN_ONLY;
+  gpio::Flags diff = (gpio::Flags)(flags ^ arg->flags);
+  if (diff & gpio::FLAG_OUTPUT) {
+    if (flags & gpio::FLAG_OUTPUT) {
+      gpio_hal_output_enable(&GPIO_HAL, arg->pin);
+      if (flags & gpio::FLAG_OPEN_DRAIN)
+        gpio_hal_od_enable(&GPIO_HAL, arg->pin);
+    } else {
+      gpio_hal_output_disable(&GPIO_HAL, arg->pin);
+    }
   }
-  gpio_set_pull_mode(arg->pin, pull_mode);
+  if (diff & gpio::FLAG_INPUT) {
+    if (flags & gpio::FLAG_INPUT) {
+      gpio_hal_input_enable(&GPIO_HAL, arg->pin);
+#if defined(USE_ESP32_VARIANT_ESP32)
+      if (arg->use_rtc) {
+        if (flags & gpio::FLAG_PULLUP) {
+          rtcio_hal_pullup_enable(arg->rtc_pin);
+        } else {
+          rtcio_hal_pullup_disable(arg->rtc_pin);
+        }
+        if (flags & gpio::FLAG_PULLDOWN) {
+          rtcio_hal_pulldown_enable(arg->rtc_pin);
+        } else {
+          rtcio_hal_pulldown_disable(arg->rtc_pin);
+        }
+      } else
+#endif
+      {
+        if (flags & gpio::FLAG_PULLUP) {
+          gpio_hal_pullup_en(&GPIO_HAL, arg->pin);
+        } else {
+          gpio_hal_pullup_dis(&GPIO_HAL, arg->pin);
+        }
+        if (flags & gpio::FLAG_PULLDOWN) {
+          gpio_hal_pulldown_en(&GPIO_HAL, arg->pin);
+        } else {
+          gpio_hal_pulldown_dis(&GPIO_HAL, arg->pin);
+        }
+      }
+    } else {
+      gpio_hal_input_disable(&GPIO_HAL, arg->pin);
+    }
+  }
+  arg->flags = flags;
 }
 
 }  // namespace esphome

esphome/components/esp8266/gpio.cpp

@@ -8,7 +8,7 @@ namespace esp8266 {
 
 static const char *const TAG = "esp8266";
 
-static int IRAM_ATTR flags_to_mode(gpio::Flags flags, uint8_t pin) {
+static int flags_to_mode(gpio::Flags flags, uint8_t pin) {
   if (flags == gpio::FLAG_INPUT) {  // NOLINT(bugprone-branch-clone)
     return INPUT;
   } else if (flags == gpio::FLAG_OUTPUT) {
@@ -34,12 +34,36 @@ static int IRAM_ATTR flags_to_mode(gpio::Flags flags, uint8_t pin) {
 struct ISRPinArg {
   uint8_t pin;
   bool inverted;
+  volatile uint32_t *in_reg;
+  volatile uint32_t *out_set_reg;
+  volatile uint32_t *out_clr_reg;
+  volatile uint32_t *mode_set_reg;
+  volatile uint32_t *mode_clr_reg;
+  volatile uint32_t *func_reg;
+  uint32_t mask;
 };
 
 ISRInternalGPIOPin ESP8266GPIOPin::to_isr() const {
   auto *arg = new ISRPinArg{};  // NOLINT(cppcoreguidelines-owning-memory)
-  arg->pin = pin_;
-  arg->inverted = inverted_;
+  arg->pin = this->pin_;
+  arg->inverted = this->inverted_;
+  if (this->pin_ < 16) {
+    arg->in_reg = &GPI;
+    arg->out_set_reg = &GPOS;
+    arg->out_clr_reg = &GPOC;
+    arg->mode_set_reg = &GPES;
+    arg->mode_clr_reg = &GPEC;
+    arg->func_reg = &GPF(this->pin_);
+    arg->mask = 1 << this->pin_;
+  } else {
+    arg->in_reg = &GP16I;
+    arg->out_set_reg = &GP16O;
+    arg->out_clr_reg = nullptr;
+    arg->mode_set_reg = &GP16E;
+    arg->mode_clr_reg = nullptr;
+    arg->func_reg = &GPF16;
+    arg->mask = 1;
+  }
   return ISRInternalGPIOPin((void *) arg);
 }
 
@@ -88,20 +112,57 @@ void ESP8266GPIOPin::detach_interrupt() const { detachInterrupt(pin_); }
 using namespace esp8266;
 
 bool IRAM_ATTR ISRInternalGPIOPin::digital_read() {
-  auto *arg = reinterpret_cast<ISRPinArg *>(arg_);
-  return bool(digitalRead(arg->pin)) != arg->inverted;  // NOLINT
+  auto *arg = reinterpret_cast<ISRPinArg *>(this->arg_);
+  return bool(*arg->in_reg & arg->mask) != arg->inverted;
 }
+
 void IRAM_ATTR ISRInternalGPIOPin::digital_write(bool value) {
   auto *arg = reinterpret_cast<ISRPinArg *>(arg_);
-  digitalWrite(arg->pin, value != arg->inverted ? 1 : 0);  // NOLINT
+  if (arg->pin < 16) {
+    if (value != arg->inverted) {
+      *arg->out_set_reg = arg->mask;
+    } else {
+      *arg->out_clr_reg = arg->mask;
+    }
+  } else {
+    if (value != arg->inverted) {
+      *arg->out_set_reg |= 1;
+    } else {
+      *arg->out_set_reg &= ~1;
+    }
+  }
 }
+
 void IRAM_ATTR ISRInternalGPIOPin::clear_interrupt() {
   auto *arg = reinterpret_cast<ISRPinArg *>(arg_);
   GPIO_REG_WRITE(GPIO_STATUS_W1TC_ADDRESS, 1UL << arg->pin);
 }
+
 void IRAM_ATTR ISRInternalGPIOPin::pin_mode(gpio::Flags flags) {
-  auto *arg = reinterpret_cast<ISRPinArg *>(arg_);
-  pinMode(arg->pin, flags_to_mode(flags, arg->pin));  // NOLINT
+  auto *arg = reinterpret_cast<ISRPinArg *>(this->arg_);
+  if (arg->pin < 16) {
+    if (flags & gpio::FLAG_OUTPUT) {
+      *arg->mode_set_reg = arg->mask;
+    } else {
+      *arg->mode_clr_reg = arg->mask;
+    }
+    if (flags & gpio::FLAG_PULLUP) {
+      *arg->func_reg |= 1 << GPFPU;
+    } else {
+      *arg->func_reg &= ~(1 << GPFPU);
+    }
+  } else {
+    if (flags & gpio::FLAG_OUTPUT) {
+      *arg->mode_set_reg |= 1;
+    } else {
+      *arg->mode_set_reg &= ~1;
+    }
+    if (flags & gpio::FLAG_PULLDOWN) {
+      *arg->func_reg |= 1 << GP16FPD;
+    } else {
+      *arg->func_reg &= ~(1 << GP16FPD);
+    }
+  }
 }
 
 }  // namespace esphome

esphome/components/fujitsu_general/climate.py

@@ -1,7 +1,5 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 
@@ -10,13 +8,8 @@ FujitsuGeneralClimate = fujitsu_general_ns.class_(
     "FujitsuGeneralClimate", climate_ir.ClimateIR
 )
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(FujitsuGeneralClimate),
-    }
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(FujitsuGeneralClimate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/gree/climate.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_MODEL
+from esphome.const import CONF_MODEL
 
 CODEOWNERS = ["@orestismers"]
 
@@ -21,16 +21,13 @@ MODELS = {
     "yag": Model.GREE_YAG,
 }
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(GreeClimate).extend(
     {
-        cv.GenerateID(): cv.declare_id(GreeClimate),
         cv.Required(CONF_MODEL): cv.enum(MODELS),
     }
 )
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate_ir.new_climate_ir(config)
     cg.add(var.set_model(config[CONF_MODEL]))
-
-    await climate_ir.register_climate_ir(var, config)

esphome/components/haier/climate.py

@@ -30,6 +30,7 @@ from esphome.const import (
     CONF_VISUAL,
     CONF_WIFI,
 )
+from esphome.cpp_generator import MockObjClass
 import esphome.final_validate as fv
 
 _LOGGER = logging.getLogger(__name__)
@@ -185,42 +186,46 @@ def validate_visual(config):
     return config
 
 
-BASE_CONFIG_SCHEMA = (
-    climate.CLIMATE_SCHEMA.extend(
-        {
-            cv.Optional(CONF_SUPPORTED_MODES): cv.ensure_list(
-                cv.enum(SUPPORTED_CLIMATE_MODES_OPTIONS, upper=True)
-            ),
-            cv.Optional(
-                CONF_SUPPORTED_SWING_MODES,
-                default=[
-                    "VERTICAL",
-                    "HORIZONTAL",
-                    "BOTH",
-                ],
-            ): cv.ensure_list(cv.enum(SUPPORTED_SWING_MODES_OPTIONS, upper=True)),
-            cv.Optional(CONF_WIFI_SIGNAL, default=False): cv.boolean,
-            cv.Optional(CONF_DISPLAY): cv.boolean,
-            cv.Optional(
-                CONF_ANSWER_TIMEOUT,
-            ): cv.positive_time_period_milliseconds,
-            cv.Optional(CONF_ON_STATUS_MESSAGE): automation.validate_automation(
-                {
-                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(StatusMessageTrigger),
-                }
-            ),
-        }
+def _base_config_schema(class_: MockObjClass) -> cv.Schema:
+    return (
+        climate.climate_schema(class_)
+        .extend(
+            {
+                cv.Optional(CONF_SUPPORTED_MODES): cv.ensure_list(
+                    cv.enum(SUPPORTED_CLIMATE_MODES_OPTIONS, upper=True)
+                ),
+                cv.Optional(
+                    CONF_SUPPORTED_SWING_MODES,
+                    default=[
+                        "VERTICAL",
+                        "HORIZONTAL",
+                        "BOTH",
+                    ],
+                ): cv.ensure_list(cv.enum(SUPPORTED_SWING_MODES_OPTIONS, upper=True)),
+                cv.Optional(CONF_WIFI_SIGNAL, default=False): cv.boolean,
+                cv.Optional(CONF_DISPLAY): cv.boolean,
+                cv.Optional(
+                    CONF_ANSWER_TIMEOUT,
+                ): cv.positive_time_period_milliseconds,
+                cv.Optional(CONF_ON_STATUS_MESSAGE): automation.validate_automation(
+                    {
+                        cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
+                            StatusMessageTrigger
+                        ),
+                    }
+                ),
+            }
+        )
+        .extend(uart.UART_DEVICE_SCHEMA)
+        .extend(cv.COMPONENT_SCHEMA)
     )
-    .extend(uart.UART_DEVICE_SCHEMA)
-    .extend(cv.COMPONENT_SCHEMA)
-)
+
 
 CONFIG_SCHEMA = cv.All(
     cv.typed_schema(
         {
-            PROTOCOL_SMARTAIR2: BASE_CONFIG_SCHEMA.extend(
+            PROTOCOL_SMARTAIR2: _base_config_schema(Smartair2Climate).extend(
                 {
-                    cv.GenerateID(): cv.declare_id(Smartair2Climate),
                     cv.Optional(
                         CONF_ALTERNATIVE_SWING_CONTROL, default=False
                     ): cv.boolean,
@@ -232,9 +237,8 @@ CONFIG_SCHEMA = cv.All(
                     ),
                 }
             ),
-            PROTOCOL_HON: BASE_CONFIG_SCHEMA.extend(
+            PROTOCOL_HON: _base_config_schema(HonClimate).extend(
                 {
-                    cv.GenerateID(): cv.declare_id(HonClimate),
                     cv.Optional(
                         CONF_CONTROL_METHOD, default="SET_GROUP_PARAMETERS"
                     ): cv.ensure_list(
@@ -464,10 +468,9 @@ FINAL_VALIDATE_SCHEMA = _final_validate
 
 async def to_code(config):
     cg.add(haier_ns.init_haier_protocol_logging())
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
     await uart.register_uart_device(var, config)
-    await climate.register_climate(var, config)
 
     cg.add(var.set_send_wifi(config[CONF_WIFI_SIGNAL]))
     if CONF_CONTROL_METHOD in config:

esphome/components/hbridge/fan/__init__.py

@@ -30,25 +30,28 @@ DECAY_MODE_OPTIONS = {
 # Actions
 BrakeAction = hbridge_ns.class_("BrakeAction", automation.Action)
 
-CONFIG_SCHEMA = fan.FAN_SCHEMA.extend(
-    {
-        cv.GenerateID(CONF_ID): cv.declare_id(HBridgeFan),
-        cv.Required(CONF_PIN_A): cv.use_id(output.FloatOutput),
-        cv.Required(CONF_PIN_B): cv.use_id(output.FloatOutput),
-        cv.Optional(CONF_DECAY_MODE, default="SLOW"): cv.enum(
-            DECAY_MODE_OPTIONS, upper=True
-        ),
-        cv.Optional(CONF_SPEED_COUNT, default=100): cv.int_range(min=1),
-        cv.Optional(CONF_ENABLE_PIN): cv.use_id(output.FloatOutput),
-        cv.Optional(CONF_PRESET_MODES): validate_preset_modes,
-    }
-).extend(cv.COMPONENT_SCHEMA)
+CONFIG_SCHEMA = (
+    fan.fan_schema(HBridgeFan)
+    .extend(
+        {
+            cv.Required(CONF_PIN_A): cv.use_id(output.FloatOutput),
+            cv.Required(CONF_PIN_B): cv.use_id(output.FloatOutput),
+            cv.Optional(CONF_DECAY_MODE, default="SLOW"): cv.enum(
+                DECAY_MODE_OPTIONS, upper=True
+            ),
+            cv.Optional(CONF_SPEED_COUNT, default=100): cv.int_range(min=1),
+            cv.Optional(CONF_ENABLE_PIN): cv.use_id(output.FloatOutput),
+            cv.Optional(CONF_PRESET_MODES): validate_preset_modes,
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+)
 
 
 @automation.register_action(
     "fan.hbridge.brake",
     BrakeAction,
-    maybe_simple_id({cv.Required(CONF_ID): cv.use_id(HBridgeFan)}),
+    maybe_simple_id({cv.GenerateID(): cv.use_id(HBridgeFan)}),
 )
 async def fan_hbridge_brake_to_code(config, action_id, template_arg, args):
     paren = await cg.get_variable(config[CONF_ID])
@@ -56,13 +59,12 @@ async def fan_hbridge_brake_to_code(config, action_id, template_arg, args):
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(
-        config[CONF_ID],
+    var = await fan.new_fan(
+        config,
         config[CONF_SPEED_COUNT],
         config[CONF_DECAY_MODE],
     )
     await cg.register_component(var, config)
-    await fan.register_fan(var, config)
     pin_a_ = await cg.get_variable(config[CONF_PIN_A])
     cg.add(var.set_pin_a(pin_a_))
     pin_b_ = await cg.get_variable(config[CONF_PIN_B])

esphome/components/heatpumpir/climate.py

@@ -2,7 +2,6 @@ import esphome.codegen as cg
 from esphome.components import climate_ir
 import esphome.config_validation as cv
 from esphome.const import (
-    CONF_ID,
     CONF_MAX_TEMPERATURE,
     CONF_MIN_TEMPERATURE,
     CONF_PROTOCOL,
@@ -98,9 +97,8 @@ VERTICAL_DIRECTIONS = {
 }
 
 CONFIG_SCHEMA = cv.All(
-    climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
+    climate_ir.climare_ir_with_receiver_schema(HeatpumpIRClimate).extend(
         {
-            cv.GenerateID(): cv.declare_id(HeatpumpIRClimate),
             cv.Required(CONF_PROTOCOL): cv.enum(PROTOCOLS),
             cv.Required(CONF_HORIZONTAL_DEFAULT): cv.enum(HORIZONTAL_DIRECTIONS),
             cv.Required(CONF_VERTICAL_DEFAULT): cv.enum(VERTICAL_DIRECTIONS),
@@ -112,8 +110,8 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
-def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+async def to_code(config):
+    var = await climate_ir.new_climate_ir(config)
     if CONF_VISUAL not in config:
         config[CONF_VISUAL] = {}
     visual = config[CONF_VISUAL]
@@ -121,7 +119,6 @@ def to_code(config):
         visual[CONF_MAX_TEMPERATURE] = config[CONF_MAX_TEMPERATURE]
     if CONF_MIN_TEMPERATURE not in visual:
         visual[CONF_MIN_TEMPERATURE] = config[CONF_MIN_TEMPERATURE]
-    yield climate_ir.register_climate_ir(var, config)
     cg.add(var.set_protocol(config[CONF_PROTOCOL]))
     cg.add(var.set_horizontal_default(config[CONF_HORIZONTAL_DEFAULT]))
     cg.add(var.set_vertical_default(config[CONF_VERTICAL_DEFAULT]))

esphome/components/hitachi_ac344/climate.py

@@ -1,20 +1,13 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 
 hitachi_ac344_ns = cg.esphome_ns.namespace("hitachi_ac344")
 HitachiClimate = hitachi_ac344_ns.class_("HitachiClimate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(HitachiClimate),
-    }
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(HitachiClimate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/hitachi_ac424/climate.py

@@ -1,20 +1,13 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 
 hitachi_ac424_ns = cg.esphome_ns.namespace("hitachi_ac424")
 HitachiClimate = hitachi_ac424_ns.class_("HitachiClimate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(HitachiClimate),
-    }
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(HitachiClimate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/i2s_audio/media_player/__init__.py

@@ -2,7 +2,7 @@ from esphome import pins
 import esphome.codegen as cg
 from esphome.components import esp32, media_player
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_MODE
+from esphome.const import CONF_MODE
 
 from .. import (
     CONF_I2S_AUDIO_ID,
@@ -57,16 +57,17 @@ def validate_esp32_variant(config):
 CONFIG_SCHEMA = cv.All(
     cv.typed_schema(
         {
-            "internal": media_player.MEDIA_PLAYER_SCHEMA.extend(
+            "internal": media_player.media_player_schema(I2SAudioMediaPlayer)
+            .extend(
                 {
-                    cv.GenerateID(): cv.declare_id(I2SAudioMediaPlayer),
                     cv.GenerateID(CONF_I2S_AUDIO_ID): cv.use_id(I2SAudioComponent),
                     cv.Required(CONF_MODE): cv.enum(INTERNAL_DAC_OPTIONS, lower=True),
                 }
-            ).extend(cv.COMPONENT_SCHEMA),
-            "external": media_player.MEDIA_PLAYER_SCHEMA.extend(
+            )
+            .extend(cv.COMPONENT_SCHEMA),
+            "external": media_player.media_player_schema(I2SAudioMediaPlayer)
+            .extend(
                 {
-                    cv.GenerateID(): cv.declare_id(I2SAudioMediaPlayer),
                     cv.GenerateID(CONF_I2S_AUDIO_ID): cv.use_id(I2SAudioComponent),
                     cv.Required(
                         CONF_I2S_DOUT_PIN
@@ -79,7 +80,8 @@ CONFIG_SCHEMA = cv.All(
                         *I2C_COMM_FMT_OPTIONS, lower=True
                     ),
                 }
-            ).extend(cv.COMPONENT_SCHEMA),
+            )
+            .extend(cv.COMPONENT_SCHEMA),
         },
         key=CONF_DAC_TYPE,
     ),
@@ -97,9 +99,8 @@ FINAL_VALIDATE_SCHEMA = _final_validate
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await media_player.new_media_player(config)
     await cg.register_component(var, config)
-    await media_player.register_media_player(var, config)
 
     await cg.register_parented(var, config[CONF_I2S_AUDIO_ID])
 

esphome/components/media_player/__init__.py

@@ -2,6 +2,8 @@ from esphome import automation
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_ENTITY_CATEGORY,
+    CONF_ICON,
     CONF_ID,
     CONF_ON_IDLE,
     CONF_ON_STATE,
@@ -10,6 +12,7 @@ from esphome.const import (
 )
 from esphome.core import CORE
 from esphome.coroutine import coroutine_with_priority
+from esphome.cpp_generator import MockObjClass
 from esphome.cpp_helpers import setup_entity
 
 CODEOWNERS = ["@jesserockz"]
@@ -103,7 +106,13 @@ async def register_media_player(var, config):
     await setup_media_player_core_(var, config)
 
 
-MEDIA_PLAYER_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(
+async def new_media_player(config, *args):
+    var = cg.new_Pvariable(config[CONF_ID], *args)
+    await register_media_player(var, config)
+    return var
+
+
+_MEDIA_PLAYER_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(
     {
         cv.Optional(CONF_ON_STATE): automation.validate_automation(
             {
@@ -134,6 +143,29 @@ MEDIA_PLAYER_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(
 )
 
 
+def media_player_schema(
+    class_: MockObjClass,
+    *,
+    entity_category: str = cv.UNDEFINED,
+    icon: str = cv.UNDEFINED,
+) -> cv.Schema:
+    schema = {cv.GenerateID(CONF_ID): cv.declare_id(class_)}
+
+    for key, default, validator in [
+        (CONF_ENTITY_CATEGORY, entity_category, cv.entity_category),
+        (CONF_ICON, icon, cv.icon),
+    ]:
+        if default is not cv.UNDEFINED:
+            schema[cv.Optional(key, default=default)] = validator
+
+    return _MEDIA_PLAYER_SCHEMA.extend(schema)
+
+
+# Remove before 2025.11.0
+MEDIA_PLAYER_SCHEMA = media_player_schema(MediaPlayer)
+MEDIA_PLAYER_SCHEMA.add_extra(cv.deprecated_schema_constant("media_player"))
+
+
 MEDIA_PLAYER_ACTION_SCHEMA = automation.maybe_simple_id(
     cv.Schema(
         {

esphome/components/midea/climate.py

@@ -104,9 +104,9 @@ validate_custom_fan_modes = cv.enum(CUSTOM_FAN_MODES, upper=True)
 validate_custom_presets = cv.enum(CUSTOM_PRESETS, upper=True)
 
 CONFIG_SCHEMA = cv.All(
-    climate.CLIMATE_SCHEMA.extend(
+    climate.climate_schema(AirConditioner)
+    .extend(
         {
-            cv.GenerateID(): cv.declare_id(AirConditioner),
             cv.Optional(CONF_PERIOD, default="1s"): cv.time_period,
             cv.Optional(CONF_TIMEOUT, default="2s"): cv.time_period,
             cv.Optional(CONF_NUM_ATTEMPTS, default=3): cv.int_range(min=1, max=5),
@@ -259,10 +259,9 @@ async def power_inv_to_code(var, config, args):
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
     await uart.register_uart_device(var, config)
-    await climate.register_climate(var, config)
     cg.add(var.set_period(config[CONF_PERIOD].total_milliseconds))
     cg.add(var.set_response_timeout(config[CONF_TIMEOUT].total_milliseconds))
     cg.add(var.set_request_attempts(config[CONF_NUM_ATTEMPTS]))

esphome/components/midea_ir/climate.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_USE_FAHRENHEIT
+from esphome.const import CONF_USE_FAHRENHEIT
 
 AUTO_LOAD = ["climate_ir", "coolix"]
 CODEOWNERS = ["@dudanov"]
@@ -10,15 +10,13 @@ midea_ir_ns = cg.esphome_ns.namespace("midea_ir")
 MideaIR = midea_ir_ns.class_("MideaIR", climate_ir.ClimateIR)
 
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(MideaIR).extend(
     {
-        cv.GenerateID(): cv.declare_id(MideaIR),
         cv.Optional(CONF_USE_FAHRENHEIT, default=False): cv.boolean,
     }
 )
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    var = await climate_ir.new_climate_ir(config)
     cg.add(var.set_fahrenheit(config[CONF_USE_FAHRENHEIT]))

esphome/components/mipi_spi/__init__.py

@@ -0,0 +1,15 @@
+CODEOWNERS = ["@clydebarrow"]
+
+DOMAIN = "mipi_spi"
+
+CONF_DRAW_FROM_ORIGIN = "draw_from_origin"
+CONF_SPI_16 = "spi_16"
+CONF_PIXEL_MODE = "pixel_mode"
+CONF_COLOR_DEPTH = "color_depth"
+CONF_BUS_MODE = "bus_mode"
+CONF_USE_AXIS_FLIPS = "use_axis_flips"
+CONF_NATIVE_WIDTH = "native_width"
+CONF_NATIVE_HEIGHT = "native_height"
+
+MODE_RGB = "RGB"
+MODE_BGR = "BGR"

esphome/components/mipi_spi/display.py

@@ -0,0 +1,474 @@
+import logging
+
+from esphome import pins
+import esphome.codegen as cg
+from esphome.components import display, spi
+from esphome.components.spi import TYPE_OCTAL, TYPE_QUAD, TYPE_SINGLE
+import esphome.config_validation as cv
+from esphome.config_validation import ALLOW_EXTRA
+from esphome.const import (
+    CONF_BRIGHTNESS,
+    CONF_COLOR_ORDER,
+    CONF_CS_PIN,
+    CONF_DATA_RATE,
+    CONF_DC_PIN,
+    CONF_DIMENSIONS,
+    CONF_ENABLE_PIN,
+    CONF_HEIGHT,
+    CONF_ID,
+    CONF_INIT_SEQUENCE,
+    CONF_INVERT_COLORS,
+    CONF_LAMBDA,
+    CONF_MIRROR_X,
+    CONF_MIRROR_Y,
+    CONF_MODEL,
+    CONF_OFFSET_HEIGHT,
+    CONF_OFFSET_WIDTH,
+    CONF_RESET_PIN,
+    CONF_ROTATION,
+    CONF_SWAP_XY,
+    CONF_TRANSFORM,
+    CONF_WIDTH,
+)
+from esphome.core import TimePeriod
+
+from ..const import CONF_DRAW_ROUNDING
+from ..lvgl.defines import CONF_COLOR_DEPTH
+from . import (
+    CONF_BUS_MODE,
+    CONF_DRAW_FROM_ORIGIN,
+    CONF_NATIVE_HEIGHT,
+    CONF_NATIVE_WIDTH,
+    CONF_PIXEL_MODE,
+    CONF_SPI_16,
+    CONF_USE_AXIS_FLIPS,
+    DOMAIN,
+    MODE_BGR,
+    MODE_RGB,
+)
+from .models import (
+    DELAY_FLAG,
+    MADCTL_BGR,
+    MADCTL_MV,
+    MADCTL_MX,
+    MADCTL_MY,
+    MADCTL_XFLIP,
+    MADCTL_YFLIP,
+    DriverChip,
+    amoled,
+    cyd,
+    ili,
+    jc,
+    lanbon,
+    lilygo,
+    waveshare,
+)
+from .models.commands import BRIGHTNESS, DISPON, INVOFF, INVON, MADCTL, PIXFMT, SLPOUT
+
+DEPENDENCIES = ["spi"]
+
+LOGGER = logging.getLogger(DOMAIN)
+mipi_spi_ns = cg.esphome_ns.namespace("mipi_spi")
+MipiSpi = mipi_spi_ns.class_(
+    "MipiSpi", display.Display, display.DisplayBuffer, cg.Component, spi.SPIDevice
+)
+ColorOrder = display.display_ns.enum("ColorMode")
+ColorBitness = display.display_ns.enum("ColorBitness")
+Model = mipi_spi_ns.enum("Model")
+
+COLOR_ORDERS = {
+    MODE_RGB: ColorOrder.COLOR_ORDER_RGB,
+    MODE_BGR: ColorOrder.COLOR_ORDER_BGR,
+}
+
+COLOR_DEPTHS = {
+    8: ColorBitness.COLOR_BITNESS_332,
+    16: ColorBitness.COLOR_BITNESS_565,
+}
+DATA_PIN_SCHEMA = pins.internal_gpio_output_pin_schema
+
+
+DriverChip("CUSTOM", initsequence={})
+
+MODELS = DriverChip.models
+# These statements are noops, but serve to suppress linting of side-effect-only imports
+for _ in (ili, jc, amoled, lilygo, lanbon, cyd, waveshare):
+    pass
+
+PixelMode = mipi_spi_ns.enum("PixelMode")
+
+PIXEL_MODE_18BIT = "18bit"
+PIXEL_MODE_16BIT = "16bit"
+
+PIXEL_MODES = {
+    PIXEL_MODE_16BIT: 0x55,
+    PIXEL_MODE_18BIT: 0x66,
+}
+
+
+def validate_dimension(rounding):
+    def validator(value):
+        value = cv.positive_int(value)
+        if value % rounding != 0:
+            raise cv.Invalid(f"Dimensions and offsets must be divisible by {rounding}")
+        return value
+
+    return validator
+
+
+def map_sequence(value):
+    """
+    The format is a repeated sequence of [CMD, <data>] where <data> is s a sequence of bytes. The length is inferred
+    from the length of the sequence and should not be explicit.
+    A delay can be inserted by specifying "- delay N" where N is in ms
+    """
+    if isinstance(value, str) and value.lower().startswith("delay "):
+        value = value.lower()[6:]
+        delay = cv.All(
+            cv.positive_time_period_milliseconds,
+            cv.Range(TimePeriod(milliseconds=1), TimePeriod(milliseconds=255)),
+        )(value)
+        return DELAY_FLAG, delay.total_milliseconds
+    if isinstance(value, int):
+        return (value,)
+    value = cv.All(cv.ensure_list(cv.int_range(0, 255)), cv.Length(1, 254))(value)
+    return tuple(value)
+
+
+def power_of_two(value):
+    value = cv.int_range(1, 128)(value)
+    if value & (value - 1) != 0:
+        raise cv.Invalid("value must be a power of two")
+    return value
+
+
+def dimension_schema(rounding):
+    return cv.Any(
+        cv.dimensions,
+        cv.Schema(
+            {
+                cv.Required(CONF_WIDTH): validate_dimension(rounding),
+                cv.Required(CONF_HEIGHT): validate_dimension(rounding),
+                cv.Optional(CONF_OFFSET_HEIGHT, default=0): validate_dimension(
+                    rounding
+                ),
+                cv.Optional(CONF_OFFSET_WIDTH, default=0): validate_dimension(rounding),
+            }
+        ),
+    )
+
+
+def model_schema(bus_mode, model: DriverChip, swapsies: bool):
+    transform = cv.Schema(
+        {
+            cv.Required(CONF_MIRROR_X): cv.boolean,
+            cv.Required(CONF_MIRROR_Y): cv.boolean,
+        }
+    )
+    if model.get_default(CONF_SWAP_XY, False) == cv.UNDEFINED:
+        transform = transform.extend(
+            {
+                cv.Optional(CONF_SWAP_XY): cv.invalid(
+                    "Axis swapping not supported by this model"
+                )
+            }
+        )
+    else:
+        transform = transform.extend(
+            {
+                cv.Required(CONF_SWAP_XY): cv.boolean,
+            }
+        )
+    # CUSTOM model will need to provide a custom init sequence
+    iseqconf = (
+        cv.Required(CONF_INIT_SEQUENCE)
+        if model.initsequence is None
+        else cv.Optional(CONF_INIT_SEQUENCE)
+    )
+    # Dimensions are optional if the model has a default width and the transform is not overridden
+    cv_dimensions = (
+        cv.Optional if model.get_default(CONF_WIDTH) and not swapsies else cv.Required
+    )
+    pixel_modes = PIXEL_MODES if bus_mode == TYPE_SINGLE else (PIXEL_MODE_16BIT,)
+    color_depth = (
+        ("16", "8", "16bit", "8bit") if bus_mode == TYPE_SINGLE else ("16", "16bit")
+    )
+    schema = (
+        display.FULL_DISPLAY_SCHEMA.extend(
+            spi.spi_device_schema(
+                cs_pin_required=False,
+                default_mode="MODE3" if bus_mode == TYPE_OCTAL else "MODE0",
+                default_data_rate=model.get_default(CONF_DATA_RATE, 10_000_000),
+                mode=bus_mode,
+            )
+        )
+        .extend(
+            {
+                model.option(pin, cv.UNDEFINED): pins.gpio_output_pin_schema
+                for pin in (CONF_RESET_PIN, CONF_CS_PIN, CONF_DC_PIN)
+            }
+        )
+        .extend(
+            {
+                cv.GenerateID(): cv.declare_id(MipiSpi),
+                cv_dimensions(CONF_DIMENSIONS): dimension_schema(
+                    model.get_default(CONF_DRAW_ROUNDING, 1)
+                ),
+                model.option(CONF_ENABLE_PIN, cv.UNDEFINED): cv.ensure_list(
+                    pins.gpio_output_pin_schema
+                ),
+                model.option(CONF_COLOR_ORDER, MODE_BGR): cv.enum(
+                    COLOR_ORDERS, upper=True
+                ),
+                model.option(CONF_COLOR_DEPTH, 16): cv.one_of(*color_depth, lower=True),
+                model.option(CONF_DRAW_ROUNDING, 2): power_of_two,
+                model.option(CONF_PIXEL_MODE, PIXEL_MODE_16BIT): cv.Any(
+                    cv.one_of(*pixel_modes, lower=True),
+                    cv.int_range(0, 255, min_included=True, max_included=True),
+                ),
+                cv.Optional(CONF_TRANSFORM): transform,
+                cv.Optional(CONF_BUS_MODE, default=bus_mode): cv.one_of(
+                    bus_mode, lower=True
+                ),
+                cv.Required(CONF_MODEL): cv.one_of(model.name, upper=True),
+                iseqconf: cv.ensure_list(map_sequence),
+            }
+        )
+        .extend(
+            {
+                model.option(x): cv.boolean
+                for x in [
+                    CONF_DRAW_FROM_ORIGIN,
+                    CONF_SPI_16,
+                    CONF_INVERT_COLORS,
+                    CONF_USE_AXIS_FLIPS,
+                ]
+            }
+        )
+    )
+    if brightness := model.get_default(CONF_BRIGHTNESS):
+        schema = schema.extend(
+            {
+                cv.Optional(CONF_BRIGHTNESS, default=brightness): cv.int_range(
+                    0, 0xFF, min_included=True, max_included=True
+                ),
+            }
+        )
+    if bus_mode != TYPE_SINGLE:
+        return cv.All(schema, cv.only_with_esp_idf)
+    return schema
+
+
+def rotation_as_transform(model, config):
+    """
+    Check if a rotation can be implemented in hardware using the MADCTL register.
+    A rotation of 180 is always possible, 90 and 270 are possible if the model supports swapping X and Y.
+    """
+    rotation = config.get(CONF_ROTATION, 0)
+    return rotation and (
+        model.get_default(CONF_SWAP_XY) != cv.UNDEFINED or rotation == 180
+    )
+
+
+def config_schema(config):
+    # First get the model and bus mode
+    config = cv.Schema(
+        {
+            cv.Required(CONF_MODEL): cv.one_of(*MODELS, upper=True),
+        },
+        extra=ALLOW_EXTRA,
+    )(config)
+    model = MODELS[config[CONF_MODEL]]
+    bus_modes = model.modes
+    config = cv.Schema(
+        {
+            model.option(CONF_BUS_MODE, TYPE_SINGLE): cv.one_of(*bus_modes, lower=True),
+            cv.Required(CONF_MODEL): cv.one_of(*MODELS, upper=True),
+        },
+        extra=ALLOW_EXTRA,
+    )(config)
+    bus_mode = config.get(CONF_BUS_MODE, model.modes[0])
+    swapsies = config.get(CONF_TRANSFORM, {}).get(CONF_SWAP_XY) is True
+    config = model_schema(bus_mode, model, swapsies)(config)
+    # Check for invalid combinations of MADCTL config
+    if init_sequence := config.get(CONF_INIT_SEQUENCE):
+        if MADCTL in [x[0] for x in init_sequence] and CONF_TRANSFORM in config:
+            raise cv.Invalid(
+                f"transform is not supported when MADCTL ({MADCTL:#X}) is in the init sequence"
+            )
+
+    if bus_mode == TYPE_QUAD and CONF_DC_PIN in config:
+        raise cv.Invalid("DC pin is not supported in quad mode")
+    if config[CONF_PIXEL_MODE] == PIXEL_MODE_18BIT and bus_mode != TYPE_SINGLE:
+        raise cv.Invalid("18-bit pixel mode is not supported on a quad or octal bus")
+    if bus_mode != TYPE_QUAD and CONF_DC_PIN not in config:
+        raise cv.Invalid(f"DC pin is required in {bus_mode} mode")
+    return config
+
+
+CONFIG_SCHEMA = config_schema
+
+
+def get_transform(model, config):
+    can_transform = rotation_as_transform(model, config)
+    transform = config.get(
+        CONF_TRANSFORM,
+        {
+            CONF_MIRROR_X: model.get_default(CONF_MIRROR_X, False),
+            CONF_MIRROR_Y: model.get_default(CONF_MIRROR_Y, False),
+            CONF_SWAP_XY: model.get_default(CONF_SWAP_XY, False),
+        },
+    )
+
+    # Can we use the MADCTL register to set the rotation?
+    if can_transform and CONF_TRANSFORM not in config:
+        rotation = config[CONF_ROTATION]
+        if rotation == 180:
+            transform[CONF_MIRROR_X] = not transform[CONF_MIRROR_X]
+            transform[CONF_MIRROR_Y] = not transform[CONF_MIRROR_Y]
+        elif rotation == 90:
+            transform[CONF_SWAP_XY] = not transform[CONF_SWAP_XY]
+            transform[CONF_MIRROR_X] = not transform[CONF_MIRROR_X]
+        else:
+            transform[CONF_SWAP_XY] = not transform[CONF_SWAP_XY]
+            transform[CONF_MIRROR_Y] = not transform[CONF_MIRROR_Y]
+        transform[CONF_TRANSFORM] = True
+    return transform
+
+
+def get_sequence(model, config):
+    """
+    Create the init sequence for the display.
+    Use the default sequence from the model, if any, and append any custom sequence provided in the config.
+    Append SLPOUT (if not already in the sequence) and DISPON to the end of the sequence
+    Pixel format, color order, and orientation will be set.
+    """
+    sequence = list(model.initsequence)
+    custom_sequence = config.get(CONF_INIT_SEQUENCE, [])
+    sequence.extend(custom_sequence)
+    # Ensure each command is a tuple
+    sequence = [x if isinstance(x, tuple) else (x,) for x in sequence]
+    commands = [x[0] for x in sequence]
+    # Set pixel format if not already in the custom sequence
+    if PIXFMT not in commands:
+        pixel_mode = config[CONF_PIXEL_MODE]
+        if not isinstance(pixel_mode, int):
+            pixel_mode = PIXEL_MODES[pixel_mode]
+        sequence.append((PIXFMT, pixel_mode))
+    # Does the chip use the flipping bits for mirroring rather than the reverse order bits?
+    use_flip = config[CONF_USE_AXIS_FLIPS]
+    if MADCTL not in commands:
+        madctl = 0
+        transform = get_transform(model, config)
+        if transform.get(CONF_TRANSFORM):
+            LOGGER.info("Using hardware transform to implement rotation")
+        if transform.get(CONF_MIRROR_X):
+            madctl |= MADCTL_XFLIP if use_flip else MADCTL_MX
+        if transform.get(CONF_MIRROR_Y):
+            madctl |= MADCTL_YFLIP if use_flip else MADCTL_MY
+        if transform.get(CONF_SWAP_XY) is True:  # Exclude Undefined
+            madctl |= MADCTL_MV
+        if config[CONF_COLOR_ORDER] == MODE_BGR:
+            madctl |= MADCTL_BGR
+        sequence.append((MADCTL, madctl))
+    if INVON not in commands and INVOFF not in commands:
+        if config[CONF_INVERT_COLORS]:
+            sequence.append((INVON,))
+        else:
+            sequence.append((INVOFF,))
+    if BRIGHTNESS not in commands:
+        if brightness := config.get(
+            CONF_BRIGHTNESS, model.get_default(CONF_BRIGHTNESS)
+        ):
+            sequence.append((BRIGHTNESS, brightness))
+    if SLPOUT not in commands:
+        sequence.append((SLPOUT,))
+    sequence.append((DISPON,))
+
+    # Flatten the sequence into a list of bytes, with the length of each command
+    # or the delay flag inserted where needed
+    return sum(
+        tuple(
+            (x[1], 0xFF) if x[0] == DELAY_FLAG else (x[0], len(x) - 1) + x[1:]
+            for x in sequence
+        ),
+        (),
+    )
+
+
+async def to_code(config):
+    model = MODELS[config[CONF_MODEL]]
+    transform = get_transform(model, config)
+    if CONF_DIMENSIONS in config:
+        # Explicit dimensions, just use as is
+        dimensions = config[CONF_DIMENSIONS]
+        if isinstance(dimensions, dict):
+            width = dimensions[CONF_WIDTH]
+            height = dimensions[CONF_HEIGHT]
+            offset_width = dimensions[CONF_OFFSET_WIDTH]
+            offset_height = dimensions[CONF_OFFSET_HEIGHT]
+        else:
+            (width, height) = dimensions
+            offset_width = 0
+            offset_height = 0
+    else:
+        # Default dimensions, use model defaults and transform if needed
+        width = model.get_default(CONF_WIDTH)
+        height = model.get_default(CONF_HEIGHT)
+        offset_width = model.get_default(CONF_OFFSET_WIDTH, 0)
+        offset_height = model.get_default(CONF_OFFSET_HEIGHT, 0)
+
+        # if mirroring axes and there are offsets, also mirror the offsets to cater for situations where
+        # the offset is asymmetric
+        if transform[CONF_MIRROR_X]:
+            native_width = model.get_default(
+                CONF_NATIVE_WIDTH, width + offset_width * 2
+            )
+            offset_width = native_width - width - offset_width
+        if transform[CONF_MIRROR_Y]:
+            native_height = model.get_default(
+                CONF_NATIVE_HEIGHT, height + offset_height * 2
+            )
+            offset_height = native_height - height - offset_height
+        # Swap default dimensions if swap_xy is set
+        if transform[CONF_SWAP_XY] is True:
+            width, height = height, width
+            offset_height, offset_width = offset_width, offset_height
+
+    color_depth = config[CONF_COLOR_DEPTH]
+    if color_depth.endswith("bit"):
+        color_depth = color_depth[:-3]
+    color_depth = COLOR_DEPTHS[int(color_depth)]
+
+    var = cg.new_Pvariable(
+        config[CONF_ID], width, height, offset_width, offset_height, color_depth
+    )
+    cg.add(var.set_init_sequence(get_sequence(model, config)))
+    if rotation_as_transform(model, config):
+        if CONF_TRANSFORM in config:
+            LOGGER.warning("Use of 'transform' with 'rotation' is not recommended")
+        else:
+            config[CONF_ROTATION] = 0
+    cg.add(var.set_model(config[CONF_MODEL]))
+    cg.add(var.set_draw_from_origin(config[CONF_DRAW_FROM_ORIGIN]))
+    cg.add(var.set_draw_rounding(config[CONF_DRAW_ROUNDING]))
+    cg.add(var.set_spi_16(config[CONF_SPI_16]))
+    if enable_pin := config.get(CONF_ENABLE_PIN):
+        enable = [await cg.gpio_pin_expression(pin) for pin in enable_pin]
+        cg.add(var.set_enable_pins(enable))
+
+    if reset_pin := config.get(CONF_RESET_PIN):
+        reset = await cg.gpio_pin_expression(reset_pin)
+        cg.add(var.set_reset_pin(reset))
+
+    if dc_pin := config.get(CONF_DC_PIN):
+        dc_pin = await cg.gpio_pin_expression(dc_pin)
+        cg.add(var.set_dc_pin(dc_pin))
+
+    if lamb := config.get(CONF_LAMBDA):
+        lambda_ = await cg.process_lambda(
+            lamb, [(display.DisplayRef, "it")], return_type=cg.void
+        )
+        cg.add(var.set_writer(lambda_))
+    await display.register_display(var, config)
+    await spi.register_spi_device(var, config)

esphome/components/mipi_spi/mipi_spi.cpp

@@ -0,0 +1,481 @@
+#include "mipi_spi.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace mipi_spi {
+
+void MipiSpi::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up MIPI SPI");
+  this->spi_setup();
+  if (this->dc_pin_ != nullptr) {
+    this->dc_pin_->setup();
+    this->dc_pin_->digital_write(false);
+  }
+  for (auto *pin : this->enable_pins_) {
+    pin->setup();
+    pin->digital_write(true);
+  }
+  if (this->reset_pin_ != nullptr) {
+    this->reset_pin_->setup();
+    this->reset_pin_->digital_write(true);
+    delay(5);
+    this->reset_pin_->digital_write(false);
+    delay(5);
+    this->reset_pin_->digital_write(true);
+  }
+  this->bus_width_ = this->parent_->get_bus_width();
+
+  // need to know when the display is ready for SLPOUT command - will be 120ms after reset
+  auto when = millis() + 120;
+  delay(10);
+  size_t index = 0;
+  auto &vec = this->init_sequence_;
+  while (index != vec.size()) {
+    if (vec.size() - index < 2) {
+      ESP_LOGE(TAG, "Malformed init sequence");
+      this->mark_failed();
+      return;
+    }
+    uint8_t cmd = vec[index++];
+    uint8_t x = vec[index++];
+    if (x == DELAY_FLAG) {
+      ESP_LOGD(TAG, "Delay %dms", cmd);
+      delay(cmd);
+    } else {
+      uint8_t num_args = x & 0x7F;
+      if (vec.size() - index < num_args) {
+        ESP_LOGE(TAG, "Malformed init sequence");
+        this->mark_failed();
+        return;
+      }
+      auto arg_byte = vec[index];
+      switch (cmd) {
+        case SLEEP_OUT: {
+          // are we ready, boots?
+          int duration = when - millis();
+          if (duration > 0) {
+            ESP_LOGD(TAG, "Sleep %dms", duration);
+            delay(duration);
+          }
+        } break;
+
+        case INVERT_ON:
+          this->invert_colors_ = true;
+          break;
+        case MADCTL_CMD:
+          this->madctl_ = arg_byte;
+          break;
+        case PIXFMT:
+          this->pixel_mode_ = arg_byte & 0x11 ? PIXEL_MODE_16 : PIXEL_MODE_18;
+          break;
+        case BRIGHTNESS:
+          this->brightness_ = arg_byte;
+          break;
+
+        default:
+          break;
+      }
+      const auto *ptr = vec.data() + index;
+      ESP_LOGD(TAG, "Command %02X, length %d, byte %02X", cmd, num_args, arg_byte);
+      this->write_command_(cmd, ptr, num_args);
+      index += num_args;
+      if (cmd == SLEEP_OUT)
+        delay(10);
+    }
+  }
+  this->setup_complete_ = true;
+  if (this->draw_from_origin_)
+    check_buffer_();
+  ESP_LOGCONFIG(TAG, "MIPI SPI setup complete");
+}
+
+void MipiSpi::update() {
+  if (!this->setup_complete_ || this->is_failed()) {
+    return;
+  }
+  this->do_update_();
+  if (this->buffer_ == nullptr || this->x_low_ > this->x_high_ || this->y_low_ > this->y_high_)
+    return;
+  ESP_LOGV(TAG, "x_low %d, y_low %d, x_high %d, y_high %d", this->x_low_, this->y_low_, this->x_high_, this->y_high_);
+  // Some chips require that the drawing window be aligned on certain boundaries
+  auto dr = this->draw_rounding_;
+  this->x_low_ = this->x_low_ / dr * dr;
+  this->y_low_ = this->y_low_ / dr * dr;
+  this->x_high_ = (this->x_high_ + dr) / dr * dr - 1;
+  this->y_high_ = (this->y_high_ + dr) / dr * dr - 1;
+  if (this->draw_from_origin_) {
+    this->x_low_ = 0;
+    this->y_low_ = 0;
+    this->x_high_ = this->width_ - 1;
+  }
+  int w = this->x_high_ - this->x_low_ + 1;
+  int h = this->y_high_ - this->y_low_ + 1;
+  this->write_to_display_(this->x_low_, this->y_low_, w, h, this->buffer_, this->x_low_, this->y_low_,
+                          this->width_ - w - this->x_low_);
+  // invalidate watermarks
+  this->x_low_ = this->width_;
+  this->y_low_ = this->height_;
+  this->x_high_ = 0;
+  this->y_high_ = 0;
+}
+
+void MipiSpi::fill(Color color) {
+  if (!this->check_buffer_())
+    return;
+  this->x_low_ = 0;
+  this->y_low_ = 0;
+  this->x_high_ = this->get_width_internal() - 1;
+  this->y_high_ = this->get_height_internal() - 1;
+  switch (this->color_depth_) {
+    case display::COLOR_BITNESS_332: {
+      auto new_color = display::ColorUtil::color_to_332(color, display::ColorOrder::COLOR_ORDER_RGB);
+      memset(this->buffer_, (uint8_t) new_color, this->buffer_bytes_);
+      break;
+    }
+    default: {
+      auto new_color = display::ColorUtil::color_to_565(color);
+      if (((uint8_t) (new_color >> 8)) == ((uint8_t) new_color)) {
+        // Upper and lower is equal can use quicker memset operation. Takes ~20ms.
+        memset(this->buffer_, (uint8_t) new_color, this->buffer_bytes_);
+      } else {
+        auto *ptr_16 = reinterpret_cast<uint16_t *>(this->buffer_);
+        auto len = this->buffer_bytes_ / 2;
+        while (len--) {
+          *ptr_16++ = new_color;
+        }
+      }
+    }
+  }
+}
+
+void MipiSpi::draw_absolute_pixel_internal(int x, int y, Color color) {
+  if (x >= this->get_width_internal() || x < 0 || y >= this->get_height_internal() || y < 0) {
+    return;
+  }
+  if (!this->check_buffer_())
+    return;
+  size_t pos = (y * this->width_) + x;
+  switch (this->color_depth_) {
+    case display::COLOR_BITNESS_332: {
+      uint8_t new_color = display::ColorUtil::color_to_332(color);
+      if (this->buffer_[pos] == new_color)
+        return;
+      this->buffer_[pos] = new_color;
+      break;
+    }
+
+    case display::COLOR_BITNESS_565: {
+      auto *ptr_16 = reinterpret_cast<uint16_t *>(this->buffer_);
+      uint8_t hi_byte = static_cast<uint8_t>(color.r & 0xF8) | (color.g >> 5);
+      uint8_t lo_byte = static_cast<uint8_t>((color.g & 0x1C) << 3) | (color.b >> 3);
+      uint16_t new_color = hi_byte | (lo_byte << 8);  // big endian
+      if (ptr_16[pos] == new_color)
+        return;
+      ptr_16[pos] = new_color;
+      break;
+    }
+    default:
+      return;
+  }
+  // low and high watermark may speed up drawing from buffer
+  if (x < this->x_low_)
+    this->x_low_ = x;
+  if (y < this->y_low_)
+    this->y_low_ = y;
+  if (x > this->x_high_)
+    this->x_high_ = x;
+  if (y > this->y_high_)
+    this->y_high_ = y;
+}
+
+void MipiSpi::reset_params_() {
+  if (!this->is_ready())
+    return;
+  this->write_command_(this->invert_colors_ ? INVERT_ON : INVERT_OFF);
+  if (this->brightness_.has_value())
+    this->write_command_(BRIGHTNESS, this->brightness_.value());
+}
+
+void MipiSpi::write_init_sequence_() {
+  size_t index = 0;
+  auto &vec = this->init_sequence_;
+  while (index != vec.size()) {
+    if (vec.size() - index < 2) {
+      ESP_LOGE(TAG, "Malformed init sequence");
+      this->mark_failed();
+      return;
+    }
+    uint8_t cmd = vec[index++];
+    uint8_t x = vec[index++];
+    if (x == DELAY_FLAG) {
+      ESP_LOGV(TAG, "Delay %dms", cmd);
+      delay(cmd);
+    } else {
+      uint8_t num_args = x & 0x7F;
+      if (vec.size() - index < num_args) {
+        ESP_LOGE(TAG, "Malformed init sequence");
+        this->mark_failed();
+        return;
+      }
+      const auto *ptr = vec.data() + index;
+      this->write_command_(cmd, ptr, num_args);
+      index += num_args;
+    }
+  }
+  this->setup_complete_ = true;
+  ESP_LOGCONFIG(TAG, "MIPI SPI setup complete");
+}
+
+void MipiSpi::set_addr_window_(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2) {
+  ESP_LOGVV(TAG, "Set addr %d/%d, %d/%d", x1, y1, x2, y2);
+  uint8_t buf[4];
+  x1 += this->offset_width_;
+  x2 += this->offset_width_;
+  y1 += this->offset_height_;
+  y2 += this->offset_height_;
+  put16_be(buf, y1);
+  put16_be(buf + 2, y2);
+  this->write_command_(RASET, buf, sizeof buf);
+  put16_be(buf, x1);
+  put16_be(buf + 2, x2);
+  this->write_command_(CASET, buf, sizeof buf);
+}
+
+void MipiSpi::draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order,
+                             display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) {
+  if (!this->setup_complete_ || this->is_failed())
+    return;
+  if (w <= 0 || h <= 0)
+    return;
+  if (bitness != this->color_depth_ || big_endian != (this->bit_order_ == spi::BIT_ORDER_MSB_FIRST)) {
+    Display::draw_pixels_at(x_start, y_start, w, h, ptr, order, bitness, big_endian, x_offset, y_offset, x_pad);
+    return;
+  }
+  if (this->draw_from_origin_) {
+    auto stride = x_offset + w + x_pad;
+    for (int y = 0; y != h; y++) {
+      memcpy(this->buffer_ + ((y + y_start) * this->width_ + x_start) * 2,
+             ptr + ((y + y_offset) * stride + x_offset) * 2, w * 2);
+    }
+    ptr = this->buffer_;
+    w = this->width_;
+    h += y_start;
+    x_start = 0;
+    y_start = 0;
+    x_offset = 0;
+    y_offset = 0;
+  }
+  this->write_to_display_(x_start, y_start, w, h, ptr, x_offset, y_offset, x_pad);
+}
+
+void MipiSpi::write_18_from_16_bit_(const uint16_t *ptr, size_t w, size_t h, size_t stride) {
+  stride -= w;
+  uint8_t transfer_buffer[6 * 256];
+  size_t idx = 0;  // index into transfer_buffer
+  while (h-- != 0) {
+    for (auto x = w; x-- != 0;) {
+      auto color_val = *ptr++;
+      // deal with byte swapping
+      transfer_buffer[idx++] = (color_val & 0xF8);                                       // Blue
+      transfer_buffer[idx++] = ((color_val & 0x7) << 5) | ((color_val & 0xE000) >> 11);  // Green
+      transfer_buffer[idx++] = (color_val >> 5) & 0xF8;                                  // Red
+      if (idx == sizeof(transfer_buffer)) {
+        this->write_array(transfer_buffer, idx);
+        idx = 0;
+      }
+    }
+    ptr += stride;
+  }
+  if (idx != 0)
+    this->write_array(transfer_buffer, idx);
+}
+
+void MipiSpi::write_18_from_8_bit_(const uint8_t *ptr, size_t w, size_t h, size_t stride) {
+  stride -= w;
+  uint8_t transfer_buffer[6 * 256];
+  size_t idx = 0;  // index into transfer_buffer
+  while (h-- != 0) {
+    for (auto x = w; x-- != 0;) {
+      auto color_val = *ptr++;
+      transfer_buffer[idx++] = color_val & 0xE0;         // Red
+      transfer_buffer[idx++] = (color_val << 3) & 0xE0;  // Green
+      transfer_buffer[idx++] = color_val << 6;           // Blue
+      if (idx == sizeof(transfer_buffer)) {
+        this->write_array(transfer_buffer, idx);
+        idx = 0;
+      }
+    }
+    ptr += stride;
+  }
+  if (idx != 0)
+    this->write_array(transfer_buffer, idx);
+}
+
+void MipiSpi::write_16_from_8_bit_(const uint8_t *ptr, size_t w, size_t h, size_t stride) {
+  stride -= w;
+  uint8_t transfer_buffer[6 * 256];
+  size_t idx = 0;  // index into transfer_buffer
+  while (h-- != 0) {
+    for (auto x = w; x-- != 0;) {
+      auto color_val = *ptr++;
+      transfer_buffer[idx++] = (color_val & 0xE0) | ((color_val & 0x1C) >> 2);
+      transfer_buffer[idx++] = (color_val & 0x3) << 3;
+      if (idx == sizeof(transfer_buffer)) {
+        this->write_array(transfer_buffer, idx);
+        idx = 0;
+      }
+    }
+    ptr += stride;
+  }
+  if (idx != 0)
+    this->write_array(transfer_buffer, idx);
+}
+
+void MipiSpi::write_to_display_(int x_start, int y_start, int w, int h, const uint8_t *ptr, int x_offset, int y_offset,
+                                int x_pad) {
+  this->set_addr_window_(x_start, y_start, x_start + w - 1, y_start + h - 1);
+  auto stride = x_offset + w + x_pad;
+  const auto *offset_ptr = ptr;
+  if (this->color_depth_ == display::COLOR_BITNESS_332) {
+    offset_ptr += y_offset * stride + x_offset;
+  } else {
+    stride *= 2;
+    offset_ptr += y_offset * stride + x_offset * 2;
+  }
+
+  switch (this->bus_width_) {
+    case 4:
+      this->enable();
+      if (x_offset == 0 && x_pad == 0 && y_offset == 0) {
+        // we could deal here with a non-zero y_offset, but if x_offset is zero, y_offset probably will be so don't
+        // bother
+        this->write_cmd_addr_data(8, 0x32, 24, WDATA << 8, ptr, w * h * 2, 4);
+      } else {
+        this->write_cmd_addr_data(8, 0x32, 24, WDATA << 8, nullptr, 0, 4);
+        for (int y = 0; y != h; y++) {
+          this->write_cmd_addr_data(0, 0, 0, 0, offset_ptr, w * 2, 4);
+          offset_ptr += stride;
+        }
+      }
+      break;
+
+    case 8:
+      this->write_command_(WDATA);
+      this->enable();
+      if (x_offset == 0 && x_pad == 0 && y_offset == 0) {
+        this->write_cmd_addr_data(0, 0, 0, 0, ptr, w * h * 2, 8);
+      } else {
+        for (int y = 0; y != h; y++) {
+          this->write_cmd_addr_data(0, 0, 0, 0, offset_ptr, w * 2, 8);
+          offset_ptr += stride;
+        }
+      }
+      break;
+
+    default:
+      this->write_command_(WDATA);
+      this->enable();
+
+      if (this->color_depth_ == display::COLOR_BITNESS_565) {
+        // Source buffer is 16-bit RGB565
+        if (this->pixel_mode_ == PIXEL_MODE_18) {
+          // Convert RGB565 to RGB666
+          this->write_18_from_16_bit_(reinterpret_cast<const uint16_t *>(offset_ptr), w, h, stride / 2);
+        } else {
+          // Direct RGB565 output
+          if (x_offset == 0 && x_pad == 0 && y_offset == 0) {
+            this->write_array(ptr, w * h * 2);
+          } else {
+            for (int y = 0; y != h; y++) {
+              this->write_array(offset_ptr, w * 2);
+              offset_ptr += stride;
+            }
+          }
+        }
+      } else {
+        // Source buffer is 8-bit RGB332
+        if (this->pixel_mode_ == PIXEL_MODE_18) {
+          // Convert RGB332 to RGB666
+          this->write_18_from_8_bit_(offset_ptr, w, h, stride);
+        } else {
+          this->write_16_from_8_bit_(offset_ptr, w, h, stride);
+        }
+        break;
+      }
+  }
+  this->disable();
+}
+
+void MipiSpi::write_command_(uint8_t cmd, const uint8_t *bytes, size_t len) {
+  ESP_LOGV(TAG, "Command %02X, length %d, bytes %s", cmd, len, format_hex_pretty(bytes, len).c_str());
+  if (this->bus_width_ == 4) {
+    this->enable();
+    this->write_cmd_addr_data(8, 0x02, 24, cmd << 8, bytes, len);
+    this->disable();
+  } else if (this->bus_width_ == 8) {
+    this->dc_pin_->digital_write(false);
+    this->enable();
+    this->write_cmd_addr_data(0, 0, 0, 0, &cmd, 1, 8);
+    this->disable();
+    this->dc_pin_->digital_write(true);
+    if (len != 0) {
+      this->enable();
+      this->write_cmd_addr_data(0, 0, 0, 0, bytes, len, 8);
+      this->disable();
+    }
+  } else {
+    this->dc_pin_->digital_write(false);
+    this->enable();
+    this->write_byte(cmd);
+    this->disable();
+    this->dc_pin_->digital_write(true);
+    if (len != 0) {
+      if (this->spi_16_) {
+        for (size_t i = 0; i != len; i++) {
+          this->enable();
+          this->write_byte(0);
+          this->write_byte(bytes[i]);
+          this->disable();
+        }
+      } else {
+        this->enable();
+        this->write_array(bytes, len);
+        this->disable();
+      }
+    }
+  }
+}
+
+void MipiSpi::dump_config() {
+  ESP_LOGCONFIG(TAG, "MIPI_SPI Display");
+  ESP_LOGCONFIG(TAG, "  Model: %s", this->model_);
+  ESP_LOGCONFIG(TAG, "  Width: %u", this->width_);
+  ESP_LOGCONFIG(TAG, "  Height: %u", this->height_);
+  if (this->offset_width_ != 0)
+    ESP_LOGCONFIG(TAG, "  Offset width: %u", this->offset_width_);
+  if (this->offset_height_ != 0)
+    ESP_LOGCONFIG(TAG, "  Offset height: %u", this->offset_height_);
+  ESP_LOGCONFIG(TAG, "  Swap X/Y: %s", YESNO(this->madctl_ & MADCTL_MV));
+  ESP_LOGCONFIG(TAG, "  Mirror X: %s", YESNO(this->madctl_ & (MADCTL_MX | MADCTL_XFLIP)));
+  ESP_LOGCONFIG(TAG, "  Mirror Y: %s", YESNO(this->madctl_ & (MADCTL_MY | MADCTL_YFLIP)));
+  ESP_LOGCONFIG(TAG, "  Color depth: %d bits", this->color_depth_ == display::COLOR_BITNESS_565 ? 16 : 8);
+  ESP_LOGCONFIG(TAG, "  Invert colors: %s", YESNO(this->invert_colors_));
+  ESP_LOGCONFIG(TAG, "  Color order: %s", this->madctl_ & MADCTL_BGR ? "BGR" : "RGB");
+  ESP_LOGCONFIG(TAG, "  Pixel mode: %s", this->pixel_mode_ == PIXEL_MODE_18 ? "18bit" : "16bit");
+  if (this->brightness_.has_value())
+    ESP_LOGCONFIG(TAG, "  Brightness: %u", this->brightness_.value());
+  if (this->spi_16_)
+    ESP_LOGCONFIG(TAG, "  SPI 16bit: YES");
+  ESP_LOGCONFIG(TAG, "  Draw rounding: %u", this->draw_rounding_);
+  if (this->draw_from_origin_)
+    ESP_LOGCONFIG(TAG, "  Draw from origin: YES");
+  LOG_PIN("  CS Pin: ", this->cs_);
+  LOG_PIN("  Reset Pin: ", this->reset_pin_);
+  LOG_PIN("  DC Pin: ", this->dc_pin_);
+  ESP_LOGCONFIG(TAG, "  SPI Mode: %d", this->mode_);
+  ESP_LOGCONFIG(TAG, "  SPI Data rate: %dMHz", static_cast<unsigned>(this->data_rate_ / 1000000));
+  ESP_LOGCONFIG(TAG, "  SPI Bus width: %d", this->bus_width_);
+}
+
+}  // namespace mipi_spi
+}  // namespace esphome

esphome/components/mipi_spi/mipi_spi.h

@@ -0,0 +1,171 @@
+#pragma once
+
+#include <utility>
+
+#include "esphome/components/spi/spi.h"
+#include "esphome/components/display/display.h"
+#include "esphome/components/display/display_buffer.h"
+#include "esphome/components/display/display_color_utils.h"
+
+namespace esphome {
+namespace mipi_spi {
+
+constexpr static const char *const TAG = "display.mipi_spi";
+static const uint8_t SW_RESET_CMD = 0x01;
+static const uint8_t SLEEP_OUT = 0x11;
+static const uint8_t NORON = 0x13;
+static const uint8_t INVERT_OFF = 0x20;
+static const uint8_t INVERT_ON = 0x21;
+static const uint8_t ALL_ON = 0x23;
+static const uint8_t WRAM = 0x24;
+static const uint8_t MIPI = 0x26;
+static const uint8_t DISPLAY_ON = 0x29;
+static const uint8_t RASET = 0x2B;
+static const uint8_t CASET = 0x2A;
+static const uint8_t WDATA = 0x2C;
+static const uint8_t TEON = 0x35;
+static const uint8_t MADCTL_CMD = 0x36;
+static const uint8_t PIXFMT = 0x3A;
+static const uint8_t BRIGHTNESS = 0x51;
+static const uint8_t SWIRE1 = 0x5A;
+static const uint8_t SWIRE2 = 0x5B;
+static const uint8_t PAGESEL = 0xFE;
+
+static const uint8_t MADCTL_MY = 0x80;     // Bit 7 Bottom to top
+static const uint8_t MADCTL_MX = 0x40;     // Bit 6 Right to left
+static const uint8_t MADCTL_MV = 0x20;     // Bit 5 Swap axes
+static const uint8_t MADCTL_RGB = 0x00;    // Bit 3 Red-Green-Blue pixel order
+static const uint8_t MADCTL_BGR = 0x08;    // Bit 3 Blue-Green-Red pixel order
+static const uint8_t MADCTL_XFLIP = 0x02;  // Mirror the display horizontally
+static const uint8_t MADCTL_YFLIP = 0x01;  // Mirror the display vertically
+
+static const uint8_t DELAY_FLAG = 0xFF;
+// store a 16 bit value in a buffer, big endian.
+static inline void put16_be(uint8_t *buf, uint16_t value) {
+  buf[0] = value >> 8;
+  buf[1] = value;
+}
+
+enum PixelMode {
+  PIXEL_MODE_16,
+  PIXEL_MODE_18,
+};
+
+class MipiSpi : public display::DisplayBuffer,
+                public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_LEADING,
+                                      spi::DATA_RATE_1MHZ> {
+ public:
+  MipiSpi(size_t width, size_t height, int16_t offset_width, int16_t offset_height, display::ColorBitness color_depth)
+      : width_(width),
+        height_(height),
+        offset_width_(offset_width),
+        offset_height_(offset_height),
+        color_depth_(color_depth) {}
+  void set_model(const char *model) { this->model_ = model; }
+  void update() override;
+  void setup() override;
+  display::ColorOrder get_color_mode() {
+    return this->madctl_ & MADCTL_BGR ? display::COLOR_ORDER_BGR : display::COLOR_ORDER_RGB;
+  }
+
+  void set_reset_pin(GPIOPin *reset_pin) { this->reset_pin_ = reset_pin; }
+  void set_enable_pins(std::vector<GPIOPin *> enable_pins) { this->enable_pins_ = std::move(enable_pins); }
+  void set_dc_pin(GPIOPin *dc_pin) { this->dc_pin_ = dc_pin; }
+  void set_invert_colors(bool invert_colors) {
+    this->invert_colors_ = invert_colors;
+    this->reset_params_();
+  }
+  void set_brightness(uint8_t brightness) {
+    this->brightness_ = brightness;
+    this->reset_params_();
+  }
+
+  void set_draw_from_origin(bool draw_from_origin) { this->draw_from_origin_ = draw_from_origin; }
+  display::DisplayType get_display_type() override { return display::DisplayType::DISPLAY_TYPE_COLOR; }
+  void dump_config() override;
+
+  int get_width_internal() override { return this->width_; }
+  int get_height_internal() override { return this->height_; }
+  bool can_proceed() override { return this->setup_complete_; }
+  void set_init_sequence(const std::vector<uint8_t> &sequence) { this->init_sequence_ = sequence; }
+  void set_draw_rounding(unsigned rounding) { this->draw_rounding_ = rounding; }
+  void set_spi_16(bool spi_16) { this->spi_16_ = spi_16; }
+
+ protected:
+  bool check_buffer_() {
+    if (this->is_failed())
+      return false;
+    if (this->buffer_ != nullptr)
+      return true;
+    auto bytes_per_pixel = this->color_depth_ == display::COLOR_BITNESS_565 ? 2 : 1;
+    this->init_internal_(this->width_ * this->height_ * bytes_per_pixel);
+    if (this->buffer_ == nullptr) {
+      this->mark_failed();
+      return false;
+    }
+    this->buffer_bytes_ = this->width_ * this->height_ * bytes_per_pixel;
+    return true;
+  }
+  void fill(Color color) override;
+  void draw_absolute_pixel_internal(int x, int y, Color color) override;
+  void draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order,
+                      display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) override;
+  void write_18_from_16_bit_(const uint16_t *ptr, size_t w, size_t h, size_t stride);
+  void write_18_from_8_bit_(const uint8_t *ptr, size_t w, size_t h, size_t stride);
+  void write_16_from_8_bit_(const uint8_t *ptr, size_t w, size_t h, size_t stride);
+  void write_to_display_(int x_start, int y_start, int w, int h, const uint8_t *ptr, int x_offset, int y_offset,
+                         int x_pad);
+  /**
+   * the RM67162 in quad SPI mode seems to work like this (not in the datasheet, this is deduced from the
+   * sample code.)
+   *
+   * Immediately after enabling /CS send 4 bytes in single-dataline SPI mode:
+   *    0: either 0x2 or 0x32. The first indicates that any subsequent data bytes after the initial 4 will be
+   *        sent in 1-dataline SPI. The second indicates quad mode.
+   *    1: 0x00
+   *    2: The command (register address) byte.
+   *    3: 0x00
+   *
+   *    This is followed by zero or more data bytes in either 1-wire or 4-wire mode, depending on the first byte.
+   *    At the conclusion of the write, de-assert /CS.
+   *
+   * @param cmd
+   * @param bytes
+   * @param len
+   */
+  void write_command_(uint8_t cmd, const uint8_t *bytes, size_t len);
+
+  void write_command_(uint8_t cmd, uint8_t data) { this->write_command_(cmd, &data, 1); }
+  void write_command_(uint8_t cmd) { this->write_command_(cmd, &cmd, 0); }
+  void reset_params_();
+  void write_init_sequence_();
+  void set_addr_window_(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);
+
+  GPIOPin *reset_pin_{nullptr};
+  std::vector<GPIOPin *> enable_pins_{};
+  GPIOPin *dc_pin_{nullptr};
+  uint16_t x_low_{1};
+  uint16_t y_low_{1};
+  uint16_t x_high_{0};
+  uint16_t y_high_{0};
+  bool setup_complete_{};
+
+  bool invert_colors_{};
+  size_t width_;
+  size_t height_;
+  int16_t offset_width_;
+  int16_t offset_height_;
+  size_t buffer_bytes_{0};
+  display::ColorBitness color_depth_;
+  PixelMode pixel_mode_{PIXEL_MODE_16};
+  uint8_t bus_width_{};
+  bool spi_16_{};
+  uint8_t madctl_{};
+  bool draw_from_origin_{false};
+  unsigned draw_rounding_{2};
+  optional<uint8_t> brightness_{};
+  const char *model_{"Unknown"};
+  std::vector<uint8_t> init_sequence_{};
+};
+}  // namespace mipi_spi
+}  // namespace esphome

esphome/components/mipi_spi/models/__init__.py

@@ -0,0 +1,65 @@
+from esphome.components.spi import TYPE_OCTAL, TYPE_QUAD, TYPE_SINGLE
+import esphome.config_validation as cv
+from esphome.const import CONF_HEIGHT, CONF_OFFSET_HEIGHT, CONF_OFFSET_WIDTH, CONF_WIDTH
+
+from .. import CONF_NATIVE_HEIGHT, CONF_NATIVE_WIDTH
+
+MADCTL_MY = 0x80  # Bit 7 Bottom to top
+MADCTL_MX = 0x40  # Bit 6 Right to left
+MADCTL_MV = 0x20  # Bit 5 Reverse Mode
+MADCTL_ML = 0x10  # Bit 4 LCD refresh Bottom to top
+MADCTL_RGB = 0x00  # Bit 3 Red-Green-Blue pixel order
+MADCTL_BGR = 0x08  # Bit 3 Blue-Green-Red pixel order
+MADCTL_MH = 0x04  # Bit 2 LCD refresh right to left
+
+# These bits are used instead of the above bits on some chips, where using MX and MY results in incorrect
+# partial updates.
+MADCTL_XFLIP = 0x02  # Mirror the display horizontally
+MADCTL_YFLIP = 0x01  # Mirror the display vertically
+
+DELAY_FLAG = 0xFFF  # Special flag to indicate a delay
+
+
+def delay(ms):
+    return DELAY_FLAG, ms
+
+
+class DriverChip:
+    models = {}
+
+    def __init__(
+        self,
+        name: str,
+        modes=(TYPE_SINGLE, TYPE_QUAD, TYPE_OCTAL),
+        initsequence=None,
+        **defaults,
+    ):
+        name = name.upper()
+        self.name = name
+        self.modes = modes
+        self.initsequence = initsequence
+        self.defaults = defaults
+        DriverChip.models[name] = self
+
+    def extend(self, name, **kwargs):
+        defaults = self.defaults.copy()
+        if (
+            CONF_WIDTH in defaults
+            and CONF_OFFSET_WIDTH in kwargs
+            and CONF_NATIVE_WIDTH not in defaults
+        ):
+            defaults[CONF_NATIVE_WIDTH] = defaults[CONF_WIDTH]
+        if (
+            CONF_HEIGHT in defaults
+            and CONF_OFFSET_HEIGHT in kwargs
+            and CONF_NATIVE_HEIGHT not in defaults
+        ):
+            defaults[CONF_NATIVE_HEIGHT] = defaults[CONF_HEIGHT]
+        defaults.update(kwargs)
+        return DriverChip(name, self.modes, initsequence=self.initsequence, **defaults)
+
+    def get_default(self, key, fallback=False):
+        return self.defaults.get(key, fallback)
+
+    def option(self, name, fallback=False):
+        return cv.Optional(name, default=self.get_default(name, fallback))

esphome/components/mipi_spi/models/amoled.py

@@ -0,0 +1,72 @@
+from esphome.components.spi import TYPE_QUAD
+
+from .. import MODE_RGB
+from . import DriverChip, delay
+from .commands import MIPI, NORON, PAGESEL, PIXFMT, SLPOUT, SWIRE1, SWIRE2, TEON, WRAM
+
+DriverChip(
+    "T-DISPLAY-S3-AMOLED",
+    width=240,
+    height=536,
+    cs_pin=6,
+    reset_pin=17,
+    enable_pin=38,
+    bus_mode=TYPE_QUAD,
+    brightness=0xD0,
+    color_order=MODE_RGB,
+    initsequence=(SLPOUT,),  # Requires early SLPOUT
+)
+
+DriverChip(
+    name="T-DISPLAY-S3-AMOLED-PLUS",
+    width=240,
+    height=536,
+    cs_pin=6,
+    reset_pin=17,
+    dc_pin=7,
+    enable_pin=38,
+    data_rate="40MHz",
+    brightness=0xD0,
+    color_order=MODE_RGB,
+    initsequence=(
+        (PAGESEL, 4),
+        (0x6A, 0x00),
+        (PAGESEL, 0x05),
+        (PAGESEL, 0x07),
+        (0x07, 0x4F),
+        (PAGESEL, 0x01),
+        (0x2A, 0x02),
+        (0x2B, 0x73),
+        (PAGESEL, 0x0A),
+        (0x29, 0x10),
+        (PAGESEL, 0x00),
+        (0x53, 0x20),
+        (TEON, 0x00),
+        (PIXFMT, 0x75),
+        (0xC4, 0x80),
+    ),
+)
+
+RM690B0 = DriverChip(
+    "RM690B0",
+    brightness=0xD0,
+    color_order=MODE_RGB,
+    width=480,
+    height=600,
+    initsequence=(
+        (PAGESEL, 0x20),
+        (MIPI, 0x0A),
+        (WRAM, 0x80),
+        (SWIRE1, 0x51),
+        (SWIRE2, 0x2E),
+        (PAGESEL, 0x00),
+        (0xC2, 0x00),
+        delay(10),
+        (TEON, 0x00),
+        (NORON,),
+    ),
+)
+
+T4_S3_AMOLED = RM690B0.extend("T4-S3", width=450, offset_width=16, bus_mode=TYPE_QUAD)
+
+models = {}

esphome/components/mipi_spi/models/commands.py

@@ -0,0 +1,82 @@
+# MIPI DBI commands
+
+NOP = 0x00
+SWRESET = 0x01
+RDDID = 0x04
+RDDST = 0x09
+RDMODE = 0x0A
+RDMADCTL = 0x0B
+RDPIXFMT = 0x0C
+RDIMGFMT = 0x0D
+RDSELFDIAG = 0x0F
+SLEEP_IN = 0x10
+SLPIN = 0x10
+SLEEP_OUT = 0x11
+SLPOUT = 0x11
+PTLON = 0x12
+NORON = 0x13
+INVERT_OFF = 0x20
+INVOFF = 0x20
+INVERT_ON = 0x21
+INVON = 0x21
+ALL_ON = 0x23
+WRAM = 0x24
+GAMMASET = 0x26
+MIPI = 0x26
+DISPOFF = 0x28
+DISPON = 0x29
+CASET = 0x2A
+PASET = 0x2B
+RASET = 0x2B
+RAMWR = 0x2C
+WDATA = 0x2C
+RAMRD = 0x2E
+PTLAR = 0x30
+VSCRDEF = 0x33
+TEON = 0x35
+MADCTL = 0x36
+MADCTL_CMD = 0x36
+VSCRSADD = 0x37
+IDMOFF = 0x38
+IDMON = 0x39
+COLMOD = 0x3A
+PIXFMT = 0x3A
+GETSCANLINE = 0x45
+BRIGHTNESS = 0x51
+WRDISBV = 0x51
+RDDISBV = 0x52
+WRCTRLD = 0x53
+SWIRE1 = 0x5A
+SWIRE2 = 0x5B
+IFMODE = 0xB0
+FRMCTR1 = 0xB1
+FRMCTR2 = 0xB2
+FRMCTR3 = 0xB3
+INVCTR = 0xB4
+DFUNCTR = 0xB6
+ETMOD = 0xB7
+PWCTR1 = 0xC0
+PWCTR2 = 0xC1
+PWCTR3 = 0xC2
+PWCTR4 = 0xC3
+PWCTR5 = 0xC4
+VMCTR1 = 0xC5
+IFCTR = 0xC6
+VMCTR2 = 0xC7
+GMCTR = 0xC8
+SETEXTC = 0xC8
+PWSET = 0xD0
+VMCTR = 0xD1
+PWSETN = 0xD2
+RDID4 = 0xD3
+RDINDEX = 0xD9
+RDID1 = 0xDA
+RDID2 = 0xDB
+RDID3 = 0xDC
+RDIDX = 0xDD
+GMCTRP1 = 0xE0
+GMCTRN1 = 0xE1
+CSCON = 0xF0
+PWCTR6 = 0xF6
+ADJCTL3 = 0xF7
+PAGESEL = 0xFE

esphome/components/mipi_spi/models/cyd.py

@@ -0,0 +1,10 @@
+from .ili import ILI9341
+
+ILI9341.extend(
+    "ESP32-2432S028",
+    data_rate="40MHz",
+    cs_pin=15,
+    dc_pin=2,
+)
+
+models = {}

esphome/components/mipi_spi/models/ili.py

@@ -0,0 +1,749 @@
+from esphome.components.spi import TYPE_OCTAL
+
+from .. import MODE_RGB
+from . import DriverChip, delay
+from .commands import (
+    ADJCTL3,
+    CSCON,
+    DFUNCTR,
+    ETMOD,
+    FRMCTR1,
+    FRMCTR2,
+    FRMCTR3,
+    GAMMASET,
+    GMCTR,
+    GMCTRN1,
+    GMCTRP1,
+    IDMOFF,
+    IFCTR,
+    IFMODE,
+    INVCTR,
+    NORON,
+    PWCTR1,
+    PWCTR2,
+    PWCTR3,
+    PWCTR4,
+    PWCTR5,
+    PWSET,
+    PWSETN,
+    SETEXTC,
+    SWRESET,
+    VMCTR,
+    VMCTR1,
+    VMCTR2,
+    VSCRSADD,
+)
+
+DriverChip(
+    "M5CORE",
+    width=320,
+    height=240,
+    cs_pin=14,
+    dc_pin=27,
+    reset_pin=33,
+    initsequence=(
+        (SETEXTC, 0xFF, 0x93, 0x42),
+        (PWCTR1, 0x12, 0x12),
+        (PWCTR2, 0x03),
+        (VMCTR1, 0xF2),
+        (IFMODE, 0xE0),
+        (0xF6, 0x01, 0x00, 0x00),
+        (
+            GMCTRP1,
+            0x00,
+            0x0C,
+            0x11,
+            0x04,
+            0x11,
+            0x08,
+            0x37,
+            0x89,
+            0x4C,
+            0x06,
+            0x0C,
+            0x0A,
+            0x2E,
+            0x34,
+            0x0F,
+        ),
+        (
+            GMCTRN1,
+            0x00,
+            0x0B,
+            0x11,
+            0x05,
+            0x13,
+            0x09,
+            0x33,
+            0x67,
+            0x48,
+            0x07,
+            0x0E,
+            0x0B,
+            0x2E,
+            0x33,
+            0x0F,
+        ),
+        (DFUNCTR, 0x08, 0x82, 0x1D, 0x04),
+        (IDMOFF,),
+    ),
+)
+ILI9341 = DriverChip(
+    "ILI9341",
+    mirror_x=True,
+    width=240,
+    height=320,
+    initsequence=(
+        (0xEF, 0x03, 0x80, 0x02),
+        (0xCF, 0x00, 0xC1, 0x30),
+        (0xED, 0x64, 0x03, 0x12, 0x81),
+        (0xE8, 0x85, 0x00, 0x78),
+        (0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02),
+        (0xF7, 0x20),
+        (0xEA, 0x00, 0x00),
+        (PWCTR1, 0x23),
+        (PWCTR2, 0x10),
+        (VMCTR1, 0x3E, 0x28),
+        (VMCTR2, 0x86),
+        (VSCRSADD, 0x00),
+        (FRMCTR1, 0x00, 0x18),
+        (DFUNCTR, 0x08, 0x82, 0x27),
+        (0xF2, 0x00),
+        (GAMMASET, 0x01),
+        (
+            GMCTRP1,
+            0x0F,
+            0x31,
+            0x2B,
+            0x0C,
+            0x0E,
+            0x08,
+            0x4E,
+            0xF1,
+            0x37,
+            0x07,
+            0x10,
+            0x03,
+            0x0E,
+            0x09,
+            0x00,
+        ),
+        (
+            GMCTRN1,
+            0x00,
+            0x0E,
+            0x14,
+            0x03,
+            0x11,
+            0x07,
+            0x31,
+            0xC1,
+            0x48,
+            0x08,
+            0x0F,
+            0x0C,
+            0x31,
+            0x36,
+            0x0F,
+        ),
+    ),
+)
+DriverChip(
+    "ILI9481",
+    mirror_x=True,
+    width=320,
+    height=480,
+    use_axis_flips=True,
+    initsequence=(
+        (PWSET, 0x07, 0x42, 0x18),
+        (VMCTR, 0x00, 0x07, 0x10),
+        (PWSETN, 0x01, 0x02),
+        (PWCTR1, 0x10, 0x3B, 0x00, 0x02, 0x11),
+        (VMCTR1, 0x03),
+        (IFCTR, 0x83),
+        (GMCTR, 0x32, 0x36, 0x45, 0x06, 0x16, 0x37, 0x75, 0x77, 0x54, 0x0C, 0x00),
+    ),
+)
+DriverChip(
+    "ILI9486",
+    mirror_x=True,
+    width=320,
+    height=480,
+    initsequence=(
+        (PWCTR3, 0x44),
+        (VMCTR1, 0x00, 0x00, 0x00, 0x00),
+        (
+            GMCTRP1,
+            0x0F,
+            0x1F,
+            0x1C,
+            0x0C,
+            0x0F,
+            0x08,
+            0x48,
+            0x98,
+            0x37,
+            0x0A,
+            0x13,
+            0x04,
+            0x11,
+            0x0D,
+            0x00,
+        ),
+        (
+            GMCTRN1,
+            0x0F,
+            0x32,
+            0x2E,
+            0x0B,
+            0x0D,
+            0x05,
+            0x47,
+            0x75,
+            0x37,
+            0x06,
+            0x10,
+            0x03,
+            0x24,
+            0x20,
+            0x00,
+        ),
+    ),
+)
+DriverChip(
+    "ILI9488",
+    width=320,
+    height=480,
+    pixel_mode="18bit",
+    initsequence=(
+        (
+            GMCTRP1,
+            0x0F,
+            0x24,
+            0x1C,
+            0x0A,
+            0x0F,
+            0x08,
+            0x43,
+            0x88,
+            0x32,
+            0x0F,
+            0x10,
+            0x06,
+            0x0F,
+            0x07,
+            0x00,
+        ),
+        (
+            GMCTRN1,
+            0x0F,
+            0x38,
+            0x30,
+            0x09,
+            0x0F,
+            0x0F,
+            0x4E,
+            0x77,
+            0x3C,
+            0x07,
+            0x10,
+            0x05,
+            0x23,
+            0x1B,
+            0x00,
+        ),
+        (PWCTR1, 0x17, 0x15),
+        (PWCTR2, 0x41),
+        (VMCTR1, 0x00, 0x12, 0x80),
+        (IFMODE, 0x00),
+        (FRMCTR1, 0xA0),
+        (INVCTR, 0x02),
+        (0xE9, 0x00),
+        (ADJCTL3, 0xA9, 0x51, 0x2C, 0x82),
+    ),
+)
+ILI9488_A = DriverChip(
+    "ILI9488_A",
+    width=320,
+    height=480,
+    invert_colors=False,
+    pixel_mode="18bit",
+    mirror_x=True,
+    initsequence=(
+        (
+            GMCTRP1,
+            0x00,
+            0x03,
+            0x09,
+            0x08,
+            0x16,
+            0x0A,
+            0x3F,
+            0x78,
+            0x4C,
+            0x09,
+            0x0A,
+            0x08,
+            0x16,
+            0x1A,
+            0x0F,
+        ),
+        (
+            GMCTRN1,
+            0x00,
+            0x16,
+            0x19,
+            0x03,
+            0x0F,
+            0x05,
+            0x32,
+            0x45,
+            0x46,
+            0x04,
+            0x0E,
+            0x0D,
+            0x35,
+            0x37,
+            0x0F,
+        ),
+        (PWCTR1, 0x17, 0x15),
+        (PWCTR2, 0x41),
+        (VMCTR1, 0x00, 0x12, 0x80),
+        (IFMODE, 0x00),
+        (FRMCTR1, 0xA0),
+        (INVCTR, 0x02),
+        (DFUNCTR, 0x02, 0x02),
+        (0xE9, 0x00),
+        (ADJCTL3, 0xA9, 0x51, 0x2C, 0x82),
+    ),
+)
+ST7796 = DriverChip(
+    "ST7796",
+    mirror_x=True,
+    width=320,
+    height=480,
+    initsequence=(
+        (SWRESET,),
+        (CSCON, 0xC3),
+        (CSCON, 0x96),
+        (VMCTR1, 0x1C),
+        (IFMODE, 0x80),
+        (INVCTR, 0x01),
+        (DFUNCTR, 0x80, 0x02, 0x3B),
+        (ETMOD, 0xC6),
+        (CSCON, 0x69),
+        (CSCON, 0x3C),
+    ),
+)
+DriverChip(
+    "S3BOX",
+    width=320,
+    height=240,
+    mirror_x=True,
+    mirror_y=True,
+    invert_colors=False,
+    data_rate="40MHz",
+    dc_pin=4,
+    cs_pin=5,
+    # reset_pin={CONF_INVERTED: True, CONF_NUMBER: 48},
+    initsequence=(
+        (0xEF, 0x03, 0x80, 0x02),
+        (0xCF, 0x00, 0xC1, 0x30),
+        (0xED, 0x64, 0x03, 0x12, 0x81),
+        (0xE8, 0x85, 0x00, 0x78),
+        (0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02),
+        (0xF7, 0x20),
+        (0xEA, 0x00, 0x00),
+        (PWCTR1, 0x23),
+        (PWCTR2, 0x10),
+        (VMCTR1, 0x3E, 0x28),
+        (VMCTR2, 0x86),
+        (VSCRSADD, 0x00),
+        (FRMCTR1, 0x00, 0x18),
+        (DFUNCTR, 0x08, 0x82, 0x27),
+        (0xF2, 0x00),
+        (GAMMASET, 0x01),
+        (
+            GMCTRP1,
+            0x0F,
+            0x31,
+            0x2B,
+            0x0C,
+            0x0E,
+            0x08,
+            0x4E,
+            0xF1,
+            0x37,
+            0x07,
+            0x10,
+            0x03,
+            0x0E,
+            0x09,
+            0x00,
+        ),
+        (
+            GMCTRN1,
+            0x00,
+            0x0E,
+            0x14,
+            0x03,
+            0x11,
+            0x07,
+            0x31,
+            0xC1,
+            0x48,
+            0x08,
+            0x0F,
+            0x0C,
+            0x31,
+            0x36,
+            0x0F,
+        ),
+    ),
+)
+DriverChip(
+    "S3BOXLITE",
+    mirror_x=True,
+    color_order=MODE_RGB,
+    width=320,
+    height=240,
+    cs_pin=5,
+    dc_pin=4,
+    reset_pin=48,
+    initsequence=(
+        (0xEF, 0x03, 0x80, 0x02),
+        (0xCF, 0x00, 0xC1, 0x30),
+        (0xED, 0x64, 0x03, 0x12, 0x81),
+        (0xE8, 0x85, 0x00, 0x78),
+        (0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02),
+        (0xF7, 0x20),
+        (0xEA, 0x00, 0x00),
+        (PWCTR1, 0x23),
+        (PWCTR2, 0x10),
+        (VMCTR1, 0x3E, 0x28),
+        (VMCTR2, 0x86),
+        (VSCRSADD, 0x00),
+        (FRMCTR1, 0x00, 0x18),
+        (DFUNCTR, 0x08, 0x82, 0x27),
+        (0xF2, 0x00),
+        (GAMMASET, 0x01),
+        (
+            GMCTRP1,
+            0xF0,
+            0x09,
+            0x0B,
+            0x06,
+            0x04,
+            0x15,
+            0x2F,
+            0x54,
+            0x42,
+            0x3C,
+            0x17,
+            0x14,
+            0x18,
+            0x1B,
+        ),
+        (
+            GMCTRN1,
+            0xE0,
+            0x09,
+            0x0B,
+            0x06,
+            0x04,
+            0x03,
+            0x2B,
+            0x43,
+            0x42,
+            0x3B,
+            0x16,
+            0x14,
+            0x17,
+            0x1B,
+        ),
+    ),
+)
+ST7789V = DriverChip(
+    "ST7789V",
+    width=240,
+    height=320,
+    initsequence=(
+        (DFUNCTR, 0x0A, 0x82),
+        (FRMCTR2, 0x0C, 0x0C, 0x00, 0x33, 0x33),
+        (ETMOD, 0x35),
+        (0xBB, 0x28),
+        (PWCTR1, 0x0C),
+        (PWCTR3, 0x01, 0xFF),
+        (PWCTR4, 0x10),
+        (PWCTR5, 0x20),
+        (IFCTR, 0x0F),
+        (PWSET, 0xA4, 0xA1),
+        (
+            GMCTRP1,
+            0xD0,
+            0x00,
+            0x02,
+            0x07,
+            0x0A,
+            0x28,
+            0x32,
+            0x44,
+            0x42,
+            0x06,
+            0x0E,
+            0x12,
+            0x14,
+            0x17,
+        ),
+        (
+            GMCTRN1,
+            0xD0,
+            0x00,
+            0x02,
+            0x07,
+            0x0A,
+            0x28,
+            0x31,
+            0x54,
+            0x47,
+            0x0E,
+            0x1C,
+            0x17,
+            0x1B,
+            0x1E,
+        ),
+    ),
+)
+DriverChip(
+    "GC9A01A",
+    mirror_x=True,
+    width=240,
+    height=240,
+    initsequence=(
+        (0xEF,),
+        (0xEB, 0x14),
+        (0xFE,),
+        (0xEF,),
+        (0xEB, 0x14),
+        (0x84, 0x40),
+        (0x85, 0xFF),
+        (0x86, 0xFF),
+        (0x87, 0xFF),
+        (0x88, 0x0A),
+        (0x89, 0x21),
+        (0x8A, 0x00),
+        (0x8B, 0x80),
+        (0x8C, 0x01),
+        (0x8D, 0x01),
+        (0x8E, 0xFF),
+        (0x8F, 0xFF),
+        (0xB6, 0x00, 0x00),
+        (0x90, 0x08, 0x08, 0x08, 0x08),
+        (0xBD, 0x06),
+        (0xBC, 0x00),
+        (0xFF, 0x60, 0x01, 0x04),
+        (0xC3, 0x13),
+        (0xC4, 0x13),
+        (0xF9, 0x22),
+        (0xBE, 0x11),
+        (0xE1, 0x10, 0x0E),
+        (0xDF, 0x21, 0x0C, 0x02),
+        (0xF0, 0x45, 0x09, 0x08, 0x08, 0x26, 0x2A),
+        (0xF1, 0x43, 0x70, 0x72, 0x36, 0x37, 0x6F),
+        (0xF2, 0x45, 0x09, 0x08, 0x08, 0x26, 0x2A),
+        (0xF3, 0x43, 0x70, 0x72, 0x36, 0x37, 0x6F),
+        (0xED, 0x1B, 0x0B),
+        (0xAE, 0x77),
+        (0xCD, 0x63),
+        (0xE8, 0x34),
+        (
+            0x62,
+            0x18,
+            0x0D,
+            0x71,
+            0xED,
+            0x70,
+            0x70,
+            0x18,
+            0x0F,
+            0x71,
+            0xEF,
+            0x70,
+            0x70,
+        ),
+        (
+            0x63,
+            0x18,
+            0x11,
+            0x71,
+            0xF1,
+            0x70,
+            0x70,
+            0x18,
+            0x13,
+            0x71,
+            0xF3,
+            0x70,
+            0x70,
+        ),
+        (0x64, 0x28, 0x29, 0xF1, 0x01, 0xF1, 0x00, 0x07),
+        (0x66, 0x3C, 0x00, 0xCD, 0x67, 0x45, 0x45, 0x10, 0x00, 0x00, 0x00),
+        (0x67, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01, 0x54, 0x10, 0x32, 0x98),
+        (0x74, 0x10, 0x85, 0x80, 0x00, 0x00, 0x4E, 0x00),
+        (0x98, 0x3E, 0x07),
+        (0x35,),
+    ),
+)
+DriverChip(
+    "GC9D01N",
+    width=160,
+    height=160,
+    initsequence=(
+        (0xFE,),
+        (0xEF,),
+        (0x80, 0xFF),
+        (0x81, 0xFF),
+        (0x82, 0xFF),
+        (0x83, 0xFF),
+        (0x84, 0xFF),
+        (0x85, 0xFF),
+        (0x86, 0xFF),
+        (0x87, 0xFF),
+        (0x88, 0xFF),
+        (0x89, 0xFF),
+        (0x8A, 0xFF),
+        (0x8B, 0xFF),
+        (0x8C, 0xFF),
+        (0x8D, 0xFF),
+        (0x8E, 0xFF),
+        (0x8F, 0xFF),
+        (0x3A, 0x05),
+        (0xEC, 0x01),
+        (0x74, 0x02, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00),
+        (0x98, 0x3E),
+        (0x99, 0x3E),
+        (0xB5, 0x0D, 0x0D),
+        (0x60, 0x38, 0x0F, 0x79, 0x67),
+        (0x61, 0x38, 0x11, 0x79, 0x67),
+        (0x64, 0x38, 0x17, 0x71, 0x5F, 0x79, 0x67),
+        (0x65, 0x38, 0x13, 0x71, 0x5B, 0x79, 0x67),
+        (0x6A, 0x00, 0x00),
+        (0x6C, 0x22, 0x02, 0x22, 0x02, 0x22, 0x22, 0x50),
+        (
+            0x6E,
+            0x03,
+            0x03,
+            0x01,
+            0x01,
+            0x00,
+            0x00,
+            0x0F,
+            0x0F,
+            0x0D,
+            0x0D,
+            0x0B,
+            0x0B,
+            0x09,
+            0x09,
+            0x00,
+            0x00,
+            0x00,
+            0x00,
+            0x0A,
+            0x0A,
+            0x0C,
+            0x0C,
+            0x0E,
+            0x0E,
+            0x10,
+            0x10,
+            0x00,
+            0x00,
+            0x02,
+            0x02,
+            0x04,
+            0x04,
+        ),
+        (0xBF, 0x01),
+        (0xF9, 0x40),
+        (0x9B, 0x3B, 0x93, 0x33, 0x7F, 0x00),
+        (0x7E, 0x30),
+        (0x70, 0x0D, 0x02, 0x08, 0x0D, 0x02, 0x08),
+        (0x71, 0x0D, 0x02, 0x08),
+        (0x91, 0x0E, 0x09),
+        (0xC3, 0x19, 0xC4, 0x19, 0xC9, 0x3C),
+        (0xF0, 0x53, 0x15, 0x0A, 0x04, 0x00, 0x3E),
+        (0xF1, 0x56, 0xA8, 0x7F, 0x33, 0x34, 0x5F),
+        (0xF2, 0x53, 0x15, 0x0A, 0x04, 0x00, 0x3A),
+        (0xF3, 0x52, 0xA4, 0x7F, 0x33, 0x34, 0xDF),
+    ),
+)
+DriverChip(
+    "ST7735",
+    color_order=MODE_RGB,
+    width=128,
+    height=160,
+    initsequence=(
+        SWRESET,
+        delay(10),
+        (FRMCTR1, 0x01, 0x2C, 0x2D),
+        (FRMCTR2, 0x01, 0x2C, 0x2D),
+        (FRMCTR3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D),
+        (INVCTR, 0x07),
+        (PWCTR1, 0xA2, 0x02, 0x84),
+        (PWCTR2, 0xC5),
+        (PWCTR3, 0x0A, 0x00),
+        (PWCTR4, 0x8A, 0x2A),
+        (PWCTR5, 0x8A, 0xEE),
+        (VMCTR1, 0x0E),
+        (
+            GMCTRP1,
+            0x02,
+            0x1C,
+            0x07,
+            0x12,
+            0x37,
+            0x32,
+            0x29,
+            0x2D,
+            0x29,
+            0x25,
+            0x2B,
+            0x39,
+            0x00,
+            0x01,
+            0x03,
+            0x10,
+        ),
+        (
+            GMCTRN1,
+            0x03,
+            0x1D,
+            0x07,
+            0x06,
+            0x2E,
+            0x2C,
+            0x29,
+            0x2D,
+            0x2E,
+            0x2E,
+            0x37,
+            0x3F,
+            0x00,
+            0x00,
+            0x02,
+            0x10,
+        ),
+        NORON,
+    ),
+)
+ST7796.extend(
+    "WT32-SC01-PLUS",
+    bus_mode=TYPE_OCTAL,
+    mirror_x=True,
+    reset_pin=4,
+    dc_pin=0,
+    invert_colors=True,
+)
+
+models = {}

esphome/components/mipi_spi/models/jc.py

@@ -0,0 +1,260 @@
+from esphome.components.spi import TYPE_QUAD
+import esphome.config_validation as cv
+from esphome.const import CONF_IGNORE_STRAPPING_WARNING, CONF_NUMBER
+
+from .. import MODE_RGB
+from . import DriverChip
+
+AXS15231 = DriverChip(
+    "AXS15231",
+    draw_rounding=8,
+    swap_xy=cv.UNDEFINED,
+    color_order=MODE_RGB,
+    bus_mode=TYPE_QUAD,
+    initsequence=(
+        (0xBB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5A, 0xA5),
+        (0xC1, 0x33),
+        (0xBB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+    ),
+)
+
+AXS15231.extend(
+    "JC3248W535",
+    width=320,
+    height=480,
+    cs_pin={CONF_NUMBER: 45, CONF_IGNORE_STRAPPING_WARNING: True},
+    data_rate="40MHz",
+)
+
+DriverChip(
+    "JC3636W518",
+    height=360,
+    width=360,
+    offset_height=1,
+    draw_rounding=1,
+    cs_pin=10,
+    reset_pin=47,
+    invert_colors=True,
+    color_order=MODE_RGB,
+    bus_mode=TYPE_QUAD,
+    data_rate="40MHz",
+    initsequence=(
+        (0xF0, 0x08),
+        (0xF2, 0x08),
+        (0x9B, 0x51),
+        (0x86, 0x53),
+        (0xF2, 0x80),
+        (0xF0, 0x00),
+        (0xF0, 0x01),
+        (0xF1, 0x01),
+        (0xB0, 0x54),
+        (0xB1, 0x3F),
+        (0xB2, 0x2A),
+        (0xB4, 0x46),
+        (0xB5, 0x34),
+        (0xB6, 0xD5),
+        (0xB7, 0x30),
+        (0xBA, 0x00),
+        (0xBB, 0x08),
+        (0xBC, 0x08),
+        (0xBD, 0x00),
+        (0xC0, 0x80),
+        (0xC1, 0x10),
+        (0xC2, 0x37),
+        (0xC3, 0x80),
+        (0xC4, 0x10),
+        (0xC5, 0x37),
+        (0xC6, 0xA9),
+        (0xC7, 0x41),
+        (0xC8, 0x51),
+        (0xC9, 0xA9),
+        (0xCA, 0x41),
+        (0xCB, 0x51),
+        (0xD0, 0x91),
+        (0xD1, 0x68),
+        (0xD2, 0x69),
+        (0xF5, 0x00, 0xA5),
+        (0xDD, 0x3F),
+        (0xDE, 0x3F),
+        (0xF1, 0x10),
+        (0xF0, 0x00),
+        (0xF0, 0x02),
+        (
+            0xE0,
+            0x70,
+            0x09,
+            0x12,
+            0x0C,
+            0x0B,
+            0x27,
+            0x38,
+            0x54,
+            0x4E,
+            0x19,
+            0x15,
+            0x15,
+            0x2C,
+            0x2F,
+        ),
+        (
+            0xE1,
+            0x70,
+            0x08,
+            0x11,
+            0x0C,
+            0x0B,
+            0x27,
+            0x38,
+            0x43,
+            0x4C,
+            0x18,
+            0x14,
+            0x14,
+            0x2B,
+            0x2D,
+        ),
+        (0xF0, 0x10),
+        (0xF3, 0x10),
+        (0xE0, 0x08),
+        (0xE1, 0x00),
+        (0xE2, 0x00),
+        (0xE3, 0x00),
+        (0xE4, 0xE0),
+        (0xE5, 0x06),
+        (0xE6, 0x21),
+        (0xE7, 0x00),
+        (0xE8, 0x05),
+        (0xE9, 0x82),
+        (0xEA, 0xDF),
+        (0xEB, 0x89),
+        (0xEC, 0x20),
+        (0xED, 0x14),
+        (0xEE, 0xFF),
+        (0xEF, 0x00),
+        (0xF8, 0xFF),
+        (0xF9, 0x00),
+        (0xFA, 0x00),
+        (0xFB, 0x30),
+        (0xFC, 0x00),
+        (0xFD, 0x00),
+        (0xFE, 0x00),
+        (0xFF, 0x00),
+        (0x60, 0x42),
+        (0x61, 0xE0),
+        (0x62, 0x40),
+        (0x63, 0x40),
+        (0x64, 0x02),
+        (0x65, 0x00),
+        (0x66, 0x40),
+        (0x67, 0x03),
+        (0x68, 0x00),
+        (0x69, 0x00),
+        (0x6A, 0x00),
+        (0x6B, 0x00),
+        (0x70, 0x42),
+        (0x71, 0xE0),
+        (0x72, 0x40),
+        (0x73, 0x40),
+        (0x74, 0x02),
+        (0x75, 0x00),
+        (0x76, 0x40),
+        (0x77, 0x03),
+        (0x78, 0x00),
+        (0x79, 0x00),
+        (0x7A, 0x00),
+        (0x7B, 0x00),
+        (0x80, 0x48),
+        (0x81, 0x00),
+        (0x82, 0x05),
+        (0x83, 0x02),
+        (0x84, 0xDD),
+        (0x85, 0x00),
+        (0x86, 0x00),
+        (0x87, 0x00),
+        (0x88, 0x48),
+        (0x89, 0x00),
+        (0x8A, 0x07),
+        (0x8B, 0x02),
+        (0x8C, 0xDF),
+        (0x8D, 0x00),
+        (0x8E, 0x00),
+        (0x8F, 0x00),
+        (0x90, 0x48),
+        (0x91, 0x00),
+        (0x92, 0x09),
+        (0x93, 0x02),
+        (0x94, 0xE1),
+        (0x95, 0x00),
+        (0x96, 0x00),
+        (0x97, 0x00),
+        (0x98, 0x48),
+        (0x99, 0x00),
+        (0x9A, 0x0B),
+        (0x9B, 0x02),
+        (0x9C, 0xE3),
+        (0x9D, 0x00),
+        (0x9E, 0x00),
+        (0x9F, 0x00),
+        (0xA0, 0x48),
+        (0xA1, 0x00),
+        (0xA2, 0x04),
+        (0xA3, 0x02),
+        (0xA4, 0xDC),
+        (0xA5, 0x00),
+        (0xA6, 0x00),
+        (0xA7, 0x00),
+        (0xA8, 0x48),
+        (0xA9, 0x00),
+        (0xAA, 0x06),
+        (0xAB, 0x02),
+        (0xAC, 0xDE),
+        (0xAD, 0x00),
+        (0xAE, 0x00),
+        (0xAF, 0x00),
+        (0xB0, 0x48),
+        (0xB1, 0x00),
+        (0xB2, 0x08),
+        (0xB3, 0x02),
+        (0xB4, 0xE0),
+        (0xB5, 0x00),
+        (0xB6, 0x00),
+        (0xB7, 0x00),
+        (0xB8, 0x48),
+        (0xB9, 0x00),
+        (0xBA, 0x0A),
+        (0xBB, 0x02),
+        (0xBC, 0xE2),
+        (0xBD, 0x00),
+        (0xBE, 0x00),
+        (0xBF, 0x00),
+        (0xC0, 0x12),
+        (0xC1, 0xAA),
+        (0xC2, 0x65),
+        (0xC3, 0x74),
+        (0xC4, 0x47),
+        (0xC5, 0x56),
+        (0xC6, 0x00),
+        (0xC7, 0x88),
+        (0xC8, 0x99),
+        (0xC9, 0x33),
+        (0xD0, 0x21),
+        (0xD1, 0xAA),
+        (0xD2, 0x65),
+        (0xD3, 0x74),
+        (0xD4, 0x47),
+        (0xD5, 0x56),
+        (0xD6, 0x00),
+        (0xD7, 0x88),
+        (0xD8, 0x99),
+        (0xD9, 0x33),
+        (0xF3, 0x01),
+        (0xF0, 0x00),
+        (0xF0, 0x01),
+        (0xF1, 0x01),
+        (0xA0, 0x0B),
+        (0xA3, 0x2A),
+        (0xA5, 0xC3),
+    ),
+)
+
+models = {}

esphome/components/mipi_spi/models/lanbon.py

@@ -0,0 +1,15 @@
+from .ili import ST7789V
+
+ST7789V.extend(
+    "LANBON-L8",
+    width=240,
+    height=320,
+    mirror_x=True,
+    mirror_y=True,
+    data_rate="80MHz",
+    cs_pin=22,
+    dc_pin=21,
+    reset_pin=18,
+)
+
+models = {}

esphome/components/mipi_spi/models/lilygo.py

@@ -0,0 +1,60 @@
+from esphome.components.spi import TYPE_OCTAL
+
+from .. import MODE_BGR
+from .ili import ST7789V, ST7796
+
+ST7789V.extend(
+    "T-EMBED",
+    width=170,
+    height=320,
+    offset_width=35,
+    color_order=MODE_BGR,
+    invert_colors=True,
+    draw_rounding=1,
+    cs_pin=10,
+    dc_pin=13,
+    reset_pin=9,
+    data_rate="80MHz",
+)
+
+ST7789V.extend(
+    "T-DISPLAY",
+    height=240,
+    width=135,
+    offset_width=52,
+    offset_height=40,
+    draw_rounding=1,
+    cs_pin=5,
+    dc_pin=16,
+    invert_colors=True,
+)
+ST7789V.extend(
+    "T-DISPLAY-S3",
+    height=320,
+    width=170,
+    offset_width=35,
+    color_order=MODE_BGR,
+    invert_colors=True,
+    draw_rounding=1,
+    dc_pin=7,
+    cs_pin=6,
+    reset_pin=5,
+    enable_pin=[9, 15],
+    data_rate="10MHz",
+    bus_mode=TYPE_OCTAL,
+)
+
+ST7796.extend(
+    "T-DISPLAY-S3-PRO",
+    width=222,
+    height=480,
+    offset_width=49,
+    draw_rounding=1,
+    cs_pin=39,
+    reset_pin=47,
+    dc_pin=9,
+    backlight_pin=48,
+    invert_colors=True,
+)
+
+models = {}

esphome/components/mipi_spi/models/waveshare.py

@@ -0,0 +1,139 @@
+from . import DriverChip
+from .ili import ILI9488_A
+
+DriverChip(
+    "WAVESHARE-4-TFT",
+    width=320,
+    height=480,
+    invert_colors=True,
+    spi_16=True,
+    initsequence=(
+        (
+            0xF9,
+            0x00,
+            0x08,
+        ),
+        (
+            0xC0,
+            0x19,
+            0x1A,
+        ),
+        (
+            0xC1,
+            0x45,
+            0x00,
+        ),
+        (
+            0xC2,
+            0x33,
+        ),
+        (
+            0xC5,
+            0x00,
+            0x28,
+        ),
+        (
+            0xB1,
+            0xA0,
+            0x11,
+        ),
+        (
+            0xB4,
+            0x02,
+        ),
+        (
+            0xB6,
+            0x00,
+            0x42,
+            0x3B,
+        ),
+        (
+            0xB7,
+            0x07,
+        ),
+        (
+            0xE0,
+            0x1F,
+            0x25,
+            0x22,
+            0x0B,
+            0x06,
+            0x0A,
+            0x4E,
+            0xC6,
+            0x39,
+            0x00,
+            0x00,
+            0x00,
+            0x00,
+            0x00,
+            0x00,
+        ),
+        (
+            0xE1,
+            0x1F,
+            0x3F,
+            0x3F,
+            0x0F,
+            0x1F,
+            0x0F,
+            0x46,
+            0x49,
+            0x31,
+            0x05,
+            0x09,
+            0x03,
+            0x1C,
+            0x1A,
+            0x00,
+        ),
+        (
+            0xF1,
+            0x36,
+            0x04,
+            0x00,
+            0x3C,
+            0x0F,
+            0x0F,
+            0xA4,
+            0x02,
+        ),
+        (
+            0xF2,
+            0x18,
+            0xA3,
+            0x12,
+            0x02,
+            0x32,
+            0x12,
+            0xFF,
+            0x32,
+            0x00,
+        ),
+        (
+            0xF4,
+            0x40,
+            0x00,
+            0x08,
+            0x91,
+            0x04,
+        ),
+        (
+            0xF8,
+            0x21,
+            0x04,
+        ),
+    ),
+)
+
+ILI9488_A.extend(
+    "PICO-RESTOUCH-LCD-3.5",
+    spi_16=True,
+    pixel_mode="16bit",
+    mirror_x=True,
+    dc_pin=33,
+    cs_pin=34,
+    reset_pin=40,
+    data_rate="20MHz",
+    invert_colors=True,
+)

esphome/components/mitsubishi/climate.py

@@ -1,7 +1,6 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
 import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 CODEOWNERS = ["@RubyBailey"]
 AUTO_LOAD = ["climate_ir"]
@@ -44,9 +43,8 @@ VERTICAL_DIRECTIONS = {
 }
 
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(MitsubishiClimate).extend(
     {
-        cv.GenerateID(): cv.declare_id(MitsubishiClimate),
         cv.Optional(CONF_SET_FAN_MODE, default="3levels"): cv.enum(SETFANMODE),
         cv.Optional(CONF_SUPPORTS_DRY, default=False): cv.boolean,
         cv.Optional(CONF_SUPPORTS_FAN_ONLY, default=False): cv.boolean,
@@ -61,8 +59,7 @@ CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    var = await climate_ir.new_climate_ir(config)
 
     cg.add(var.set_fan_mode(config[CONF_SET_FAN_MODE]))
     cg.add(var.set_supports_dry(config[CONF_SUPPORTS_DRY]))

esphome/components/noblex/climate.py

@@ -1,20 +1,13 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 
 noblex_ns = cg.esphome_ns.namespace("noblex")
 NoblexClimate = noblex_ns.class_("NoblexClimate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(NoblexClimate),
-    }
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(NoblexClimate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/online_image/bmp_image.cpp

@@ -62,6 +62,13 @@ int HOT BmpDecoder::decode(uint8_t *buffer, size_t size) {
       case 1:
         this->width_bytes_ = (this->width_ % 8 == 0) ? (this->width_ / 8) : (this->width_ / 8 + 1);
         break;
+      case 24:
+        this->width_bytes_ = this->width_ * 3;
+        if (this->width_bytes_ % 4 != 0) {
+          this->padding_bytes_ = 4 - (this->width_bytes_ % 4);
+          this->width_bytes_ += this->padding_bytes_;
+        }
+        break;
       default:
         ESP_LOGE(TAG, "Unsupported bits per pixel: %d", this->bits_per_pixel_);
         return DECODE_ERROR_UNSUPPORTED_FORMAT;
@@ -78,18 +85,48 @@ int HOT BmpDecoder::decode(uint8_t *buffer, size_t size) {
     this->current_index_ = this->data_offset_;
     index = this->data_offset_;
   }
-  while (index < size) {
-    size_t paint_index = this->current_index_ - this->data_offset_;
-
-    uint8_t current_byte = buffer[index];
-    for (uint8_t i = 0; i < 8; i++) {
-      size_t x = (paint_index * 8) % this->width_ + i;
-      size_t y = (this->height_ - 1) - (paint_index / this->width_bytes_);
-      Color c = (current_byte & (1 << (7 - i))) ? display::COLOR_ON : display::COLOR_OFF;
-      this->draw(x, y, 1, 1, c);
+  switch (this->bits_per_pixel_) {
+    case 1: {
+      while (index < size) {
+        uint8_t current_byte = buffer[index];
+        for (uint8_t i = 0; i < 8; i++) {
+          size_t x = (this->paint_index_ % this->width_) + i;
+          size_t y = (this->height_ - 1) - (this->paint_index_ / this->width_);
+          Color c = (current_byte & (1 << (7 - i))) ? display::COLOR_ON : display::COLOR_OFF;
+          this->draw(x, y, 1, 1, c);
+        }
+        this->paint_index_ += 8;
+        this->current_index_++;
+        index++;
+      }
+      break;
     }
-    this->current_index_++;
-    index++;
+    case 24: {
+      while (index < size) {
+        if (index + 2 >= size) {
+          this->decoded_bytes_ += index;
+          return index;
+        }
+        uint8_t b = buffer[index];
+        uint8_t g = buffer[index + 1];
+        uint8_t r = buffer[index + 2];
+        size_t x = this->paint_index_ % this->width_;
+        size_t y = (this->height_ - 1) - (this->paint_index_ / this->width_);
+        Color c = Color(r, g, b);
+        this->draw(x, y, 1, 1, c);
+        this->paint_index_++;
+        this->current_index_ += 3;
+        index += 3;
+        if (x == this->width_ - 1 && this->padding_bytes_ > 0) {
+          index += this->padding_bytes_;
+          this->current_index_ += this->padding_bytes_;
+        }
+      }
+      break;
+    }
+    default:
+      ESP_LOGE(TAG, "Unsupported bits per pixel: %d", this->bits_per_pixel_);
+      return DECODE_ERROR_UNSUPPORTED_FORMAT;
   }
   this->decoded_bytes_ += size;
   return size;

esphome/components/online_image/bmp_image.h

@@ -24,6 +24,7 @@ class BmpDecoder : public ImageDecoder {
 
  protected:
   size_t current_index_{0};
+  size_t paint_index_{0};
   ssize_t width_{0};
   ssize_t height_{0};
   uint16_t bits_per_pixel_{0};
@@ -32,6 +33,7 @@ class BmpDecoder : public ImageDecoder {
   uint32_t color_table_entries_{0};
   size_t width_bytes_{0};
   size_t data_offset_{0};
+  uint8_t padding_bytes_{0};
 };
 
 }  // namespace online_image

esphome/components/pid/climate.py

@@ -41,9 +41,8 @@ CONF_KI_MULTIPLIER = "ki_multiplier"
 CONF_KD_MULTIPLIER = "kd_multiplier"
 
 CONFIG_SCHEMA = cv.All(
-    climate.CLIMATE_SCHEMA.extend(
+    climate.climate_schema(PIDClimate).extend(
         {
-            cv.GenerateID(): cv.declare_id(PIDClimate),
             cv.Required(CONF_SENSOR): cv.use_id(sensor.Sensor),
             cv.Optional(CONF_HUMIDITY_SENSOR): cv.use_id(sensor.Sensor),
             cv.Required(CONF_DEFAULT_TARGET_TEMPERATURE): cv.temperature,
@@ -80,9 +79,8 @@ CONFIG_SCHEMA = cv.All(
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
-    await climate.register_climate(var, config)
 
     sens = await cg.get_variable(config[CONF_SENSOR])
     cg.add(var.set_sensor(sens))

esphome/components/runtime_stats/__init__.py

@@ -1,26 +0,0 @@
-"""
-Runtime statistics component for ESPHome.
-"""
-
-import esphome.codegen as cg
-import esphome.config_validation as cv
-
-DEPENDENCIES = []
-
-CONF_ENABLED = "enabled"
-CONF_LOG_INTERVAL = "log_interval"
-
-CONFIG_SCHEMA = cv.Schema(
-    {
-        cv.Optional(CONF_ENABLED, default=True): cv.boolean,
-        cv.Optional(
-            CONF_LOG_INTERVAL, default=60000
-        ): cv.positive_time_period_milliseconds,
-    }
-)
-
-
-async def to_code(config):
-    """Generate code for the runtime statistics component."""
-    cg.add(cg.App.set_runtime_stats_enabled(config[CONF_ENABLED]))
-    cg.add(cg.App.set_runtime_stats_log_interval(config[CONF_LOG_INTERVAL]))

esphome/components/speaker/media_player/__init__.py

@@ -271,9 +271,8 @@ PIPELINE_SCHEMA = cv.Schema(
 )
 
 CONFIG_SCHEMA = cv.All(
-    media_player.MEDIA_PLAYER_SCHEMA.extend(
+    media_player.media_player_schema(SpeakerMediaPlayer).extend(
         {
-            cv.GenerateID(): cv.declare_id(SpeakerMediaPlayer),
             cv.Required(CONF_ANNOUNCEMENT_PIPELINE): PIPELINE_SCHEMA,
             cv.Optional(CONF_MEDIA_PIPELINE): PIPELINE_SCHEMA,
             cv.Optional(CONF_BUFFER_SIZE, default=1000000): cv.int_range(
@@ -343,9 +342,8 @@ async def to_code(config):
         # Allocate wifi buffers in PSRAM
         esp32.add_idf_sdkconfig_option("CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP", True)
 
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await media_player.new_media_player(config)
     await cg.register_component(var, config)
-    await media_player.register_media_player(var, config)
 
     cg.add_define("USE_OTA_STATE_CALLBACK")
 

esphome/components/speed/fan/__init__.py

@@ -6,7 +6,6 @@ from esphome.const import (
     CONF_DIRECTION_OUTPUT,
     CONF_OSCILLATION_OUTPUT,
     CONF_OUTPUT,
-    CONF_OUTPUT_ID,
     CONF_PRESET_MODES,
     CONF_SPEED,
     CONF_SPEED_COUNT,
@@ -16,25 +15,27 @@ from .. import speed_ns
 
 SpeedFan = speed_ns.class_("SpeedFan", cg.Component, fan.Fan)
 
-CONFIG_SCHEMA = fan.FAN_SCHEMA.extend(
-    {
-        cv.GenerateID(CONF_OUTPUT_ID): cv.declare_id(SpeedFan),
-        cv.Required(CONF_OUTPUT): cv.use_id(output.FloatOutput),
-        cv.Optional(CONF_OSCILLATION_OUTPUT): cv.use_id(output.BinaryOutput),
-        cv.Optional(CONF_DIRECTION_OUTPUT): cv.use_id(output.BinaryOutput),
-        cv.Optional(CONF_SPEED): cv.invalid(
-            "Configuring individual speeds is deprecated."
-        ),
-        cv.Optional(CONF_SPEED_COUNT, default=100): cv.int_range(min=1),
-        cv.Optional(CONF_PRESET_MODES): validate_preset_modes,
-    }
-).extend(cv.COMPONENT_SCHEMA)
+CONFIG_SCHEMA = (
+    fan.fan_schema(SpeedFan)
+    .extend(
+        {
+            cv.Required(CONF_OUTPUT): cv.use_id(output.FloatOutput),
+            cv.Optional(CONF_OSCILLATION_OUTPUT): cv.use_id(output.BinaryOutput),
+            cv.Optional(CONF_DIRECTION_OUTPUT): cv.use_id(output.BinaryOutput),
+            cv.Optional(CONF_SPEED): cv.invalid(
+                "Configuring individual speeds is deprecated."
+            ),
+            cv.Optional(CONF_SPEED_COUNT, default=100): cv.int_range(min=1),
+            cv.Optional(CONF_PRESET_MODES): validate_preset_modes,
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_OUTPUT_ID], config[CONF_SPEED_COUNT])
+    var = await fan.new_fan(config, config[CONF_SPEED_COUNT])
     await cg.register_component(var, config)
-    await fan.register_fan(var, config)
 
     output_ = await cg.get_variable(config[CONF_OUTPUT])
     cg.add(var.set_output(output_))

esphome/components/spi/spi.h

@@ -355,6 +355,12 @@ class SPIComponent : public Component {
 
   void setup() override;
   void dump_config() override;
+  size_t get_bus_width() const {
+    if (this->data_pins_.empty()) {
+      return 1;
+    }
+    return this->data_pins_.size();
+  }
 
  protected:
   GPIOPin *clk_pin_{nullptr};

esphome/components/tcl112/climate.py

@@ -1,7 +1,5 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 CODEOWNERS = ["@glmnet"]
@@ -9,13 +7,8 @@ CODEOWNERS = ["@glmnet"]
 tcl112_ns = cg.esphome_ns.namespace("tcl112")
 Tcl112Climate = tcl112_ns.class_("Tcl112Climate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(Tcl112Climate),
-    }
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(Tcl112Climate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/template/fan/__init__.py

@@ -2,7 +2,7 @@ import esphome.codegen as cg
 from esphome.components import fan
 from esphome.components.fan import validate_preset_modes
 import esphome.config_validation as cv
-from esphome.const import CONF_OUTPUT_ID, CONF_PRESET_MODES, CONF_SPEED_COUNT
+from esphome.const import CONF_PRESET_MODES, CONF_SPEED_COUNT
 
 from .. import template_ns
 
@@ -13,21 +13,23 @@ TemplateFan = template_ns.class_("TemplateFan", cg.Component, fan.Fan)
 CONF_HAS_DIRECTION = "has_direction"
 CONF_HAS_OSCILLATING = "has_oscillating"
 
-CONFIG_SCHEMA = fan.FAN_SCHEMA.extend(
-    {
-        cv.GenerateID(CONF_OUTPUT_ID): cv.declare_id(TemplateFan),
-        cv.Optional(CONF_HAS_DIRECTION, default=False): cv.boolean,
-        cv.Optional(CONF_HAS_OSCILLATING, default=False): cv.boolean,
-        cv.Optional(CONF_SPEED_COUNT): cv.int_range(min=1),
-        cv.Optional(CONF_PRESET_MODES): validate_preset_modes,
-    }
-).extend(cv.COMPONENT_SCHEMA)
+CONFIG_SCHEMA = (
+    fan.fan_schema(TemplateFan)
+    .extend(
+        {
+            cv.Optional(CONF_HAS_DIRECTION, default=False): cv.boolean,
+            cv.Optional(CONF_HAS_OSCILLATING, default=False): cv.boolean,
+            cv.Optional(CONF_SPEED_COUNT): cv.int_range(min=1),
+            cv.Optional(CONF_PRESET_MODES): validate_preset_modes,
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_OUTPUT_ID])
+    var = await fan.new_fan(config)
     await cg.register_component(var, config)
-    await fan.register_fan(var, config)
 
     cg.add(var.set_has_direction(config[CONF_HAS_DIRECTION]))
     cg.add(var.set_has_oscillating(config[CONF_HAS_OSCILLATING]))

esphome/components/thermostat/climate.py

@@ -516,9 +516,9 @@ def validate_thermostat(config):
 
 
 CONFIG_SCHEMA = cv.All(
-    climate.CLIMATE_SCHEMA.extend(
+    climate.climate_schema(ThermostatClimate)
+    .extend(
         {
-            cv.GenerateID(): cv.declare_id(ThermostatClimate),
             cv.Required(CONF_SENSOR): cv.use_id(sensor.Sensor),
             cv.Optional(CONF_HUMIDITY_SENSOR): cv.use_id(sensor.Sensor),
             cv.Required(CONF_IDLE_ACTION): automation.validate_automation(single=True),
@@ -631,7 +631,8 @@ CONFIG_SCHEMA = cv.All(
                 single=True
             ),
         }
-    ).extend(cv.COMPONENT_SCHEMA),
+    )
+    .extend(cv.COMPONENT_SCHEMA),
     cv.has_at_least_one_key(
         CONF_COOL_ACTION, CONF_DRY_ACTION, CONF_FAN_ONLY_ACTION, CONF_HEAT_ACTION
     ),
@@ -640,9 +641,8 @@ CONFIG_SCHEMA = cv.All(
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
-    await climate.register_climate(var, config)
 
     heat_cool_mode_available = CONF_HEAT_ACTION in config and CONF_COOL_ACTION in config
     two_points_available = CONF_HEAT_ACTION in config and (

esphome/components/toshiba/climate.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_MODEL
+from esphome.const import CONF_MODEL
 
 AUTO_LOAD = ["climate_ir"]
 CODEOWNERS = ["@kbx81"]
@@ -16,15 +16,13 @@ MODELS = {
     "RAC-PT1411HWRU-F": Model.MODEL_RAC_PT1411HWRU_F,
 }
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(ToshibaClimate).extend(
     {
-        cv.GenerateID(): cv.declare_id(ToshibaClimate),
         cv.Optional(CONF_MODEL, default="generic"): cv.enum(MODELS, upper=True),
     }
 )
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    var = await climate_ir.new_climate_ir(config)
     cg.add(var.set_model(config[CONF_MODEL]))

esphome/components/tuya/climate/__init__.py

@@ -4,7 +4,6 @@ from esphome.components import climate
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_FAN_MODE,
-    CONF_ID,
     CONF_PRESET,
     CONF_SUPPORTS_COOL,
     CONF_SUPPORTS_HEAT,
@@ -151,9 +150,9 @@ SWING_MODES = cv.Schema(
 )
 
 CONFIG_SCHEMA = cv.All(
-    climate.CLIMATE_SCHEMA.extend(
+    climate.climate_schema(TuyaClimate)
+    .extend(
         {
-            cv.GenerateID(): cv.declare_id(TuyaClimate),
             cv.GenerateID(CONF_TUYA_ID): cv.use_id(Tuya),
             cv.Optional(CONF_SUPPORTS_HEAT, default=True): cv.boolean,
             cv.Optional(CONF_SUPPORTS_COOL, default=False): cv.boolean,
@@ -186,7 +185,8 @@ CONFIG_SCHEMA = cv.All(
                 "'eco_temperature' has been moved inside of the 'eco' config block under 'preset' as 'temperature'"
             ),
         }
-    ).extend(cv.COMPONENT_SCHEMA),
+    )
+    .extend(cv.COMPONENT_SCHEMA),
     cv.has_at_least_one_key(CONF_TARGET_TEMPERATURE_DATAPOINT, CONF_SWITCH_DATAPOINT),
     validate_temperature_multipliers,
     validate_cooling_values,
@@ -194,9 +194,8 @@ CONFIG_SCHEMA = cv.All(
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
-    await climate.register_climate(var, config)
 
     paren = await cg.get_variable(config[CONF_TUYA_ID])
     cg.add(var.set_tuya_parent(paren))

esphome/components/uponor_smatrix/climate/__init__.py

@@ -1,7 +1,5 @@
 import esphome.codegen as cg
 from esphome.components import climate
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 from .. import (
     UPONOR_SMATRIX_DEVICE_SCHEMA,
@@ -19,15 +17,12 @@ UponorSmatrixClimate = uponor_smatrix_ns.class_(
     UponorSmatrixDevice,
 )
 
-CONFIG_SCHEMA = climate.CLIMATE_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(UponorSmatrixClimate),
-    }
-).extend(UPONOR_SMATRIX_DEVICE_SCHEMA)
+CONFIG_SCHEMA = climate.climate_schema(UponorSmatrixClimate).extend(
+    UPONOR_SMATRIX_DEVICE_SCHEMA
+)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
-    await climate.register_climate(var, config)
     await register_uponor_smatrix_device(var, config)

esphome/components/whirlpool/climate.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_MODEL
+from esphome.const import CONF_MODEL
 
 AUTO_LOAD = ["climate_ir"]
 CODEOWNERS = ["@glmnet"]
@@ -15,15 +15,13 @@ MODELS = {
     "DG11J1-91": Model.MODEL_DG11J1_91,
 }
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(WhirlpoolClimate).extend(
     {
-        cv.GenerateID(): cv.declare_id(WhirlpoolClimate),
         cv.Optional(CONF_MODEL, default="DG11J1-3A"): cv.enum(MODELS, upper=True),
     }
 )
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    var = await climate_ir.new_climate_ir(config)
     cg.add(var.set_model(config[CONF_MODEL]))

esphome/components/whynter/climate.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_USE_FAHRENHEIT
+from esphome.const import CONF_USE_FAHRENHEIT
 
 AUTO_LOAD = ["climate_ir"]
 
@@ -9,15 +9,13 @@ whynter_ns = cg.esphome_ns.namespace("whynter")
 Whynter = whynter_ns.class_("Whynter", climate_ir.ClimateIR)
 
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(Whynter).extend(
     {
-        cv.GenerateID(): cv.declare_id(Whynter),
         cv.Optional(CONF_USE_FAHRENHEIT, default=False): cv.boolean,
     }
 )
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    var = await climate_ir.new_climate_ir(config)
     cg.add(var.set_fahrenheit(config[CONF_USE_FAHRENHEIT]))

esphome/components/yashima/climate.py

@@ -2,7 +2,7 @@ import esphome.codegen as cg
 from esphome.components import climate, remote_transmitter, sensor
 from esphome.components.remote_base import CONF_TRANSMITTER_ID
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_SENSOR, CONF_SUPPORTS_COOL, CONF_SUPPORTS_HEAT
+from esphome.const import CONF_SENSOR, CONF_SUPPORTS_COOL, CONF_SUPPORTS_HEAT
 
 AUTO_LOAD = ["sensor"]
 
@@ -10,9 +10,9 @@ yashima_ns = cg.esphome_ns.namespace("yashima")
 YashimaClimate = yashima_ns.class_("YashimaClimate", climate.Climate, cg.Component)
 
 CONFIG_SCHEMA = cv.All(
-    climate.CLIMATE_SCHEMA.extend(
+    climate.climate_schema(YashimaClimate)
+    .extend(
         {
-            cv.GenerateID(): cv.declare_id(YashimaClimate),
             cv.GenerateID(CONF_TRANSMITTER_ID): cv.use_id(
                 remote_transmitter.RemoteTransmitterComponent
             ),
@@ -20,14 +20,14 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_SUPPORTS_HEAT, default=True): cv.boolean,
             cv.Optional(CONF_SENSOR): cv.use_id(sensor.Sensor),
         }
-    ).extend(cv.COMPONENT_SCHEMA)
+    )
+    .extend(cv.COMPONENT_SCHEMA)
 )
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
-    await climate.register_climate(var, config)
 
     cg.add(var.set_supports_cool(config[CONF_SUPPORTS_COOL]))
     cg.add(var.set_supports_heat(config[CONF_SUPPORTS_HEAT]))

esphome/components/zhlt01/climate.py

@@ -1,7 +1,5 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 CODEOWNERS = ["@cfeenstra1024"]
@@ -9,11 +7,8 @@ CODEOWNERS = ["@cfeenstra1024"]
 zhlt01_ns = cg.esphome_ns.namespace("zhlt01")
 ZHLT01Climate = zhlt01_ns.class_("ZHLT01Climate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {cv.GenerateID(): cv.declare_id(ZHLT01Climate)}
-)
+CONFIG_SCHEMA = climate_ir.climare_ir_with_receiver_schema(ZHLT01Climate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/config_validation.py

@@ -2077,14 +2077,20 @@ def rename_key(old_key, new_key):
 # Remove before 2025.11.0
 def deprecated_schema_constant(entity_type: str):
     def validator(config):
+        type: str = "unknown"
+        if (id := config.get(CONF_ID)) is not None and isinstance(id, core.ID):
+            type = str(id.type).split("::", maxsplit=1)[0]
         _LOGGER.warning(
             "Using `%s.%s_SCHEMA` is deprecated and will be removed in ESPHome 2025.11.0. "
             "Please use `%s.%s_schema(...)` instead. "
-            "If you are seeing this, report an issue to the external_component author and ask them to update it.",
+            "If you are seeing this, report an issue to the external_component author and ask them to update it. "
+            "https://developers.esphome.io/blog/2025/05/14/_schema-deprecations/. "
+            "Component using this schema: %s",
             entity_type,
             entity_type.upper(),
             entity_type,
             entity_type,
+            type,
         )
         return config
 

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2025.5.0-dev"
+__version__ = "2025.5.0b2"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (

esphome/core/application.h

@@ -7,7 +7,6 @@
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/preferences.h"
-#include "esphome/core/runtime_stats.h"
 #include "esphome/core/scheduler.h"
 
 #ifdef USE_BINARY_SENSOR
@@ -235,18 +234,6 @@ class Application {
 
   uint32_t get_loop_interval() const { return this->loop_interval_; }
 
-  /** Enable or disable runtime statistics collection.
-   *
-   * @param enable Whether to enable runtime statistics collection.
-   */
-  void set_runtime_stats_enabled(bool enable) { runtime_stats.set_enabled(enable); }
-
-  /** Set the interval at which runtime statistics are logged.
-   *
-   * @param interval The interval in milliseconds between logging of runtime statistics.
-   */
-  void set_runtime_stats_log_interval(uint32_t interval) { runtime_stats.set_log_interval(interval); }
-
   void schedule_dump_config() { this->dump_config_at_ = 0; }
 
   void feed_wdt();

esphome/core/component.cpp

@@ -243,13 +243,7 @@ void PollingComponent::set_update_interval(uint32_t update_interval) { this->upd
 WarnIfComponentBlockingGuard::WarnIfComponentBlockingGuard(Component *component)
     : started_(millis()), component_(component) {}
 WarnIfComponentBlockingGuard::~WarnIfComponentBlockingGuard() {
-  uint32_t current_time = millis();
-  uint32_t blocking_time = current_time - this->started_;
-
-  // Record component runtime stats
-  runtime_stats.record_component_time(this->component_, blocking_time, current_time);
-
-  // Original blocking check logic
+  uint32_t blocking_time = millis() - this->started_;
   bool should_warn;
   if (this->component_ != nullptr) {
     should_warn = this->component_->should_warn_of_blocking(blocking_time);
@@ -260,6 +254,7 @@ WarnIfComponentBlockingGuard::~WarnIfComponentBlockingGuard() {
     const char *src = component_ == nullptr ? "<null>" : component_->get_component_source();
     ESP_LOGW(TAG, "Component %s took a long time for an operation (%" PRIu32 " ms).", src, blocking_time);
     ESP_LOGW(TAG, "Components should block for at most 30 ms.");
+    ;
   }
 }
 

esphome/core/component.h

@@ -6,7 +6,6 @@
 #include <string>
 
 #include "esphome/core/optional.h"
-#include "esphome/core/runtime_stats.h"
 
 namespace esphome {
 

esphome/core/runtime_stats.cpp

@@ -1,28 +0,0 @@
-#include "esphome/core/runtime_stats.h"
-#include "esphome/core/component.h"
-
-namespace esphome {
-
-RuntimeStatsCollector runtime_stats;
-
-void RuntimeStatsCollector::record_component_time(Component *component, uint32_t duration_ms, uint32_t current_time) {
-  if (!this->enabled_ || component == nullptr)
-    return;
-
-  const char *component_source = component->get_component_source();
-  this->component_stats_[component_source].record_time(duration_ms);
-
-  // If next_log_time_ is 0, initialize it
-  if (this->next_log_time_ == 0) {
-    this->next_log_time_ = current_time + this->log_interval_;
-    return;
-  }
-
-  if (current_time >= this->next_log_time_) {
-    this->log_stats_();
-    this->reset_stats_();
-    this->next_log_time_ = current_time + this->log_interval_;
-  }
-}
-
-}  // namespace esphome

esphome/core/runtime_stats.h

@@ -1,161 +0,0 @@
-#pragma once
-
-#include <map>
-#include <string>
-#include <vector>
-#include <cstdint>
-#include <algorithm>
-#include "esphome/core/helpers.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-
-static const char *const RUNTIME_TAG = "runtime";
-
-class Component;  // Forward declaration
-
-class ComponentRuntimeStats {
- public:
-  ComponentRuntimeStats()
-      : period_count_(0),
-        total_count_(0),
-        period_time_ms_(0),
-        total_time_ms_(0),
-        period_max_time_ms_(0),
-        total_max_time_ms_(0) {}
-
-  void record_time(uint32_t duration_ms) {
-    // Update period counters
-    this->period_count_++;
-    this->period_time_ms_ += duration_ms;
-    if (duration_ms > this->period_max_time_ms_)
-      this->period_max_time_ms_ = duration_ms;
-
-    // Update total counters
-    this->total_count_++;
-    this->total_time_ms_ += duration_ms;
-    if (duration_ms > this->total_max_time_ms_)
-      this->total_max_time_ms_ = duration_ms;
-  }
-
-  void reset_period_stats() {
-    this->period_count_ = 0;
-    this->period_time_ms_ = 0;
-    this->period_max_time_ms_ = 0;
-  }
-
-  // Period stats (reset each logging interval)
-  uint32_t get_period_count() const { return this->period_count_; }
-  uint32_t get_period_time_ms() const { return this->period_time_ms_; }
-  uint32_t get_period_max_time_ms() const { return this->period_max_time_ms_; }
-  float get_period_avg_time_ms() const {
-    return this->period_count_ > 0 ? this->period_time_ms_ / static_cast<float>(this->period_count_) : 0.0f;
-  }
-
-  // Total stats (persistent until reboot)
-  uint32_t get_total_count() const { return this->total_count_; }
-  uint32_t get_total_time_ms() const { return this->total_time_ms_; }
-  uint32_t get_total_max_time_ms() const { return this->total_max_time_ms_; }
-  float get_total_avg_time_ms() const {
-    return this->total_count_ > 0 ? this->total_time_ms_ / static_cast<float>(this->total_count_) : 0.0f;
-  }
-
- protected:
-  // Period stats (reset each logging interval)
-  uint32_t period_count_;
-  uint32_t period_time_ms_;
-  uint32_t period_max_time_ms_;
-
-  // Total stats (persistent until reboot)
-  uint32_t total_count_;
-  uint32_t total_time_ms_;
-  uint32_t total_max_time_ms_;
-};
-
-// For sorting components by run time
-struct ComponentStatPair {
-  std::string name;
-  const ComponentRuntimeStats *stats;
-
-  bool operator>(const ComponentStatPair &other) const {
-    // Sort by period time as that's what we're displaying in the logs
-    return stats->get_period_time_ms() > other.stats->get_period_time_ms();
-  }
-};
-
-class RuntimeStatsCollector {
- public:
-  RuntimeStatsCollector() : log_interval_(60000), next_log_time_(0), enabled_(true) {}
-
-  void set_log_interval(uint32_t log_interval) { this->log_interval_ = log_interval; }
-  uint32_t get_log_interval() const { return this->log_interval_; }
-
-  void set_enabled(bool enabled) { this->enabled_ = enabled; }
-  bool is_enabled() const { return this->enabled_; }
-
-  void record_component_time(Component *component, uint32_t duration_ms, uint32_t current_time);
-
- protected:
-  void log_stats_() {
-    ESP_LOGI(RUNTIME_TAG, "Component Runtime Statistics");
-    ESP_LOGI(RUNTIME_TAG, "Period stats (last %" PRIu32 "ms):", this->log_interval_);
-
-    // First collect stats we want to display
-    std::vector<ComponentStatPair> stats_to_display;
-
-    for (const auto &it : this->component_stats_) {
-      const ComponentRuntimeStats &stats = it.second;
-      if (stats.get_period_count() > 0) {
-        ComponentStatPair pair = {it.first, &stats};
-        stats_to_display.push_back(pair);
-      }
-    }
-
-    // Sort by period runtime (descending)
-    std::sort(stats_to_display.begin(), stats_to_display.end(), std::greater<ComponentStatPair>());
-
-    // Log top components by period runtime
-    for (const auto &it : stats_to_display) {
-      const std::string &source = it.name;
-      const ComponentRuntimeStats *stats = it.stats;
-
-      ESP_LOGI(RUNTIME_TAG, "  %s: count=%" PRIu32 ", avg=%.2fms, max=%" PRIu32 "ms, total=%" PRIu32 "ms",
-               source.c_str(), stats->get_period_count(), stats->get_period_avg_time_ms(),
-               stats->get_period_max_time_ms(), stats->get_period_time_ms());
-    }
-
-    // Log total stats since boot
-    ESP_LOGI(RUNTIME_TAG, "Total stats (since boot):");
-
-    // Re-sort by total runtime for all-time stats
-    std::sort(stats_to_display.begin(), stats_to_display.end(),
-              [](const ComponentStatPair &a, const ComponentStatPair &b) {
-                return a.stats->get_total_time_ms() > b.stats->get_total_time_ms();
-              });
-
-    for (const auto &it : stats_to_display) {
-      const std::string &source = it.name;
-      const ComponentRuntimeStats *stats = it.stats;
-
-      ESP_LOGI(RUNTIME_TAG, "  %s: count=%" PRIu32 ", avg=%.2fms, max=%" PRIu32 "ms, total=%" PRIu32 "ms",
-               source.c_str(), stats->get_total_count(), stats->get_total_avg_time_ms(), stats->get_total_max_time_ms(),
-               stats->get_total_time_ms());
-    }
-  }
-
-  void reset_stats_() {
-    for (auto &it : this->component_stats_) {
-      it.second.reset_period_stats();
-    }
-  }
-
-  std::map<std::string, ComponentRuntimeStats> component_stats_;
-  uint32_t log_interval_;
-  uint32_t next_log_time_;
-  bool enabled_;
-};
-
-// Global instance for runtime stats collection
-extern RuntimeStatsCollector runtime_stats;
-
-}  // namespace esphome

requirements.txt

@@ -12,7 +12,7 @@ pyserial==3.5
 platformio==6.1.18  # When updating platformio, also update /docker/Dockerfile
 esptool==4.8.1
 click==8.1.7
-esphome-dashboard==20250415.0
+esphome-dashboard==20250514.0
 aioesphomeapi==30.2.0
 zeroconf==0.147.0
 puremagic==1.29

tests/components/mipi_spi/common.yaml

@@ -0,0 +1,38 @@
+spi:
+  - id: spi_single
+    clk_pin:
+      number: ${clk_pin}
+      allow_other_uses: true
+    mosi_pin:
+      number: ${mosi_pin}
+
+display:
+  - platform: mipi_spi
+    spi_16: true
+    pixel_mode: 18bit
+    model: ili9488
+    dc_pin: ${dc_pin}
+    cs_pin: ${cs_pin}
+    reset_pin: ${reset_pin}
+    data_rate: 20MHz
+    invert_colors: true
+    show_test_card: true
+    spi_mode: mode0
+    draw_rounding: 8
+    use_axis_flips: true
+    init_sequence:
+      - [0xd0, 1, 2, 3]
+      - delay 10ms
+    transform:
+      swap_xy: true
+      mirror_x: false
+      mirror_y: true
+    dimensions:
+      width: 100
+      height: 200
+    enable_pin:
+      - number: ${clk_pin}
+        allow_other_uses: true
+      - number: ${enable_pin}
+    bus_mode: single
+

tests/components/mipi_spi/test-esp32-2432s028.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: ESP32-2432S028

tests/components/mipi_spi/test-jc3248w535.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: JC3248W535

tests/components/mipi_spi/test-jc3636w518.esp32-s3-idf.yaml

@@ -0,0 +1,19 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 36
+    data_pins:
+      - number: 40
+      - number: 41
+      - number: 42
+      - number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: JC3636W518

tests/components/mipi_spi/test-pico-restouch-lcd-35.esp32-s3-idf.yaml

@@ -0,0 +1,9 @@
+spi:
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: Pico-ResTouch-LCD-3.5

tests/components/mipi_spi/test-s3box.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: S3BOX

tests/components/mipi_spi/test-s3boxlite.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: S3BOXLITE

tests/components/mipi_spi/test-t-display-s3-amoled-plus.esp32-s3-idf.yaml

@@ -0,0 +1,9 @@
+spi:
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: T-DISPLAY-S3-AMOLED-PLUS

tests/components/mipi_spi/test-t-display-s3-amoled.esp32-s3-idf.yaml

@@ -0,0 +1,15 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - number: 40
+      - number: 41
+      - number: 42
+      - number: 43
+
+display:
+  - platform: mipi_spi
+    model: T-DISPLAY-S3-AMOLED

tests/components/mipi_spi/test-t-display-s3-pro.esp32-s3-idf.yaml

@@ -0,0 +1,9 @@
+spi:
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 40
+
+display:
+  - platform: mipi_spi
+    model: T-DISPLAY-S3-PRO

tests/components/mipi_spi/test-t-display-s3.esp32-s3-idf.yaml

@@ -0,0 +1,37 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+
+display:
+  - platform: mipi_spi
+    model: T-DISPLAY-S3

tests/components/mipi_spi/test-t-display.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: T-DISPLAY

tests/components/mipi_spi/test-t-embed.esp32-s3-idf.yaml

@@ -0,0 +1,9 @@
+spi:
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 40
+
+display:
+  - platform: mipi_spi
+    model: T-EMBED

tests/components/mipi_spi/test-t4-s3.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: T4-S3

tests/components/mipi_spi/test-wt32-sc01-plus.esp32-s3-idf.yaml

@@ -0,0 +1,37 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 9
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+
+display:
+  - platform: mipi_spi
+    model: WT32-SC01-PLUS

tests/components/mipi_spi/test.esp32-ard.yaml

@@ -0,0 +1,15 @@
+substitutions:
+  clk_pin: GPIO16
+  mosi_pin: GPIO17
+  miso_pin: GPIO15
+  dc_pin: GPIO14
+  cs_pin: GPIO13
+  enable_pin: GPIO19
+  reset_pin: GPIO20
+
+display:
+  - platform: mipi_spi
+    model: LANBON-L8
+
+packages:
+  display: !include common.yaml

tests/components/mipi_spi/test.esp32-c3-ard.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  clk_pin: GPIO6
+  mosi_pin: GPIO7
+  miso_pin: GPIO5
+  dc_pin: GPIO21
+  cs_pin: GPIO18
+  enable_pin: GPIO19
+  reset_pin: GPIO20
+
+<<: !include common.yaml

tests/components/mipi_spi/test.esp32-c3-idf.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  clk_pin: GPIO6
+  mosi_pin: GPIO7
+  miso_pin: GPIO5
+  dc_pin: GPIO21
+  cs_pin: GPIO18
+  enable_pin: GPIO19
+  reset_pin: GPIO20
+
+<<: !include common.yaml

tests/components/mipi_spi/test.esp32-idf.yaml

@@ -0,0 +1,15 @@
+substitutions:
+  clk_pin: GPIO16
+  mosi_pin: GPIO17
+  miso_pin: GPIO15
+  dc_pin: GPIO21
+  cs_pin: GPIO18
+  enable_pin: GPIO19
+  reset_pin: GPIO20
+
+packages:
+  display: !include common.yaml
+
+display:
+  - platform: mipi_spi
+    model: m5core

tests/components/mipi_spi/test.rp2040-ard.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  clk_pin: GPIO2
+  mosi_pin: GPIO3
+  miso_pin: GPIO4
+  dc_pin: GPIO14
+  cs_pin: GPIO13
+  enable_pin: GPIO19
+  reset_pin: GPIO20
+
+<<: !include common.yaml