dfas

kessel.yaml

@@ -237,7 +237,7 @@ sensor:
     register_type: read
     address: 1000
     unit_of_measurement: "°C"
-    value_type: U_WORD
+    value_type: S_WORD
     filters:
       - multiply: 0.5
 

netzpumpe.yaml

@@ -0,0 +1,51 @@
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Ruecklauftemperatur an der Zirkulations Leitung"
+    id: ${name}_Ruecklauftemperatur_an_der_Zirkulations_Leitung
+    register_type: read
+    address: 711
+    unit_of_measurement: "°C"
+    value_type: U_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Strömungsschalter an der Brauchwasser Leitung"
+    id: ${name}_Stoemungsschalter_an_der_Brauchwasser_Leitung
+    register_type: read
+    address: 600
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Drehzahl der Zirkulations Pumpe"
+    id: ${name}_Drehzahl_der_Zirkulations_Pumpe
+    register_type: read
+    address: 710
+    unit_of_measurement: "%"
+    value_type: U_WORD
+
+binary_sensor:
+  - platform: template
+    name: "${name} Zirkulationspumpe AN AUS"
+    id: ${name}_Zirkulations_Pumpe_AN_AUS
+    lambda: |-
+      if (id(${name}_Drehzahl_der_Zirkulations_Pumpe).state > 0) {
+        return true;
+      } else {
+        return false;
+      }
+
+number:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Bei welcher RL Temperatur an der Zirkulationsleitung soll die Pumpe ausschalten"
+    id: ${name}_Bei_welcher_RL_Temperatur_an_der_Zirkulationsleitung_soll_die_Pumpe_ausschalten
+    address: 600
+    unit_of_measurement: "°C"
+    value_type: U_WORD
+    multiply: 2
+    min_value: 20
+    max_value: 120