Update README.md
This commit is contained in:
sorz2122
GitHub
112
README.md
112
README.md
@@ -1,83 +1,89 @@
|
||||
Übersetzt mit ChatGPT. Ich habe es Erfolgreich mit einer TCL TAC-12CHDA eingebunden.
|
||||
Wiring is as follows:
|
||||
# 🌀 TCL Air Conditioner Integration for Home Assistant
|
||||
|
||||
> 🇩🇪 Übersetzt mit ChatGPT – erfolgreich getestet mit **TCL TAC-12CHDA**
|
||||
> Einfaches DIY-Projekt mit ESP32 + USB-Kabel. Keine Cloud nötig.
|
||||
|
||||
## 🛠️ Was du brauchst
|
||||
|
||||
- **ESP32** (z. B. ESP32-C3, WROOM32, NodeMCU)
|
||||
- **USB-A Stecker oder Kabel**
|
||||
👉 Ich habe diese verwendet: [AliExpress Link](https://www.aliexpress.com/item/1005005776162012.html)
|
||||
- **Home Assistant mit ESPHome (ab Version 2023.3.0)**
|
||||
|
||||
---
|
||||
|
||||
## 🔌 Verkabelung
|
||||
|
||||
| USB-A Pin | Kabelfarbe | → ESP32 Pin |
|
||||
|-----------|------------|--------------|
|
||||
| GND | Schwarz | VIN |
|
||||
| D+ | Grün | GND |
|
||||
| D- | Grau | RXD |
|
||||
| VBUS | Rot | TXD |
|
||||
|
||||
### 🔍 Beispielbilder
|
||||
|
||||
|
||||
|
||||
|
||||
TCL Air Conditioner Integration with Home Assistant (Tested on TAC-12CHDA)
|
||||
Translated with ChatGPT – successfully tested on a TCL TAC-12CHDA unit.
|
||||
Wiring guide and setup instructions below.
|
||||
---
|
||||
|
||||
🛠 What You’ll Need
|
||||
ESP32 microcontroller
|
||||
## 🧠 Einrichtung in Home Assistant
|
||||
|
||||
USB-A plug or cable (I used these: AliExpress Link)
|
||||
> Die Lösung basiert auf **ESPHome** und funktioniert nur mit Home Assistant.
|
||||
|
||||
Basic soldering tools (unless your unit already has a USB/serial port)
|
||||
### 1. ESPHome installieren
|
||||
|
||||
🔌 Wiring Guide
|
||||
USB-A Pin Wire Color Connect To (ESP32)
|
||||
GND Black VIN
|
||||
D+ Green GND
|
||||
D- Grey RXD
|
||||
VBUS Red TXD
|
||||
📸 Example Photos
|
||||
- In Home Assistant unter **Einstellungen → Add-ons → ESPHome** installieren
|
||||
|
||||
|
||||
|
||||
### 2. Neues Gerät erstellen
|
||||
|
||||
- Im ESPHome Dashboard → "New Device"
|
||||
- Deinen ESP32-Typ auswählen, z. B. `esp32-c3-devkitm-1` oder `nodemcu-32s`
|
||||
|
||||
🧠 Software Setup (Using Home Assistant + ESPHome)
|
||||
This solution only works with Home Assistant + ESPHome (version 2023.3.0 or later).
|
||||
### 3. Konfiguration einfügen
|
||||
|
||||
Step-by-Step:
|
||||
Install ESPHome in Home Assistant
|
||||
Go to Settings → Add-ons → ESPHome → Install
|
||||
#### Option A: Einfache Konfiguration
|
||||
[📄 Sample_conf.yaml](https://github.com/sorz2122/tclac/blob/master/Sample_conf.yaml)
|
||||
|
||||
Create a new device
|
||||
Use the ESPHome dashboard to add a new device and choose your ESP32 board type (e.g., esp32-c3-devkitm-1 or nodemcu-32s).
|
||||
#### Option B: Erweiterte Konfiguration
|
||||
[📄 TCL-Conditioner.yaml](https://github.com/sorz2122/tclac/blob/master/TCL-Conditioner.yaml)
|
||||
|
||||
Paste the YAML configuration
|
||||
📝 **Wichtig:**
|
||||
- WLAN-Daten, Gerätename etc. anpassen
|
||||
- Kommentare im YAML helfen beim Einrichten
|
||||
|
||||
Use the simplified config from this file:
|
||||
Sample_conf.yaml
|
||||
### 4. Auf ESP32 flashen
|
||||
|
||||
Or use the more detailed config:
|
||||
TCL-Conditioner.yaml
|
||||
- USB-Kabel anschließen oder OTA (Over-the-Air) verwenden
|
||||
|
||||
Adjust all fields as needed (Wi-Fi, device name, etc.)
|
||||
---
|
||||
|
||||
Flash the ESP32
|
||||
Use USB or OTA to flash your ESP32 with the configuration.
|
||||
## ✅ Kompatible Klimaanlagen
|
||||
|
||||
✅ Supported AC Models (Confirmed Working)
|
||||
This component supports various TCL and compatible models like:
|
||||
Diese Modelle wurden erfolgreich getestet:
|
||||
|
||||
Axioma ASX09H1/ASB09H1
|
||||
- **TCL** TAC-07CHSA / TAC-09CHSA / TAC-12CHSA
|
||||
- **Daichi** AIR20AVQ1, AIR25AVQS1R-1, DA35EVQ1-1
|
||||
- **Axioma** ASX09H1 / ASB09H1
|
||||
- **Dantex** RK-12SATI / RK-12SATIE
|
||||
- ...und ähnliche Modelle
|
||||
|
||||
Daichi AIR20AVQ1/AIR20FV1
|
||||
⚠️ **Hinweis:**
|
||||
Auch wenn die Modellbezeichnung passt, kann es Unterschiede geben (kein USB-Anschluss, kein UART auf der Platine, etc.)
|
||||
|
||||
Daichi AIR25AVQS1R-1/AIR25FVS1R-1
|
||||
---
|
||||
|
||||
Daichi AIR35AVQS1R-1/AIR35FVS1R-1
|
||||
## 🔧 Erweiterte Konfiguration per Remote Package
|
||||
|
||||
Daichi DA35EVQ1-1/DF35EV1-1
|
||||
Du kannst die Konfiguration modular laden:
|
||||
|
||||
Dantex RK-12SATI/RK-12SATIE
|
||||
|
||||
TCL TAC-07CHSA/TPG-W
|
||||
|
||||
TCL TAC-09CHSA/TPG
|
||||
|
||||
TCL TAC-09CHSA/DSEI-W
|
||||
|
||||
TCL TAC-12CHSA/TPG
|
||||
|
||||
TCL TAC-12CHDA/
|
||||
|
||||
ℹ️ Note: Even units with the same model name can differ in hardware. Some may lack USB or UART ports.
|
||||
```yaml
|
||||
packages:
|
||||
remote_package:
|
||||
url: https://github.com/I-am-nightingale/tclac.git
|
||||
ref: master
|
||||
files:
|
||||
- packages/core.yaml # Hauptmodul
|
||||
# - packages/leds.yaml # Optional
|
||||
refresh: 30s
|
||||
|
||||
Reference in New Issue
Block a user