Create wemos-d1-froeling.yaml

wemos-d1-froeling.yaml

@@ -0,0 +1,298 @@
+esphome:
+  name: wemos-d1-froeling
+  friendly_name: wemos-d1-froeling
+
+esp8266:
+  board: d1_mini
+
+# Enable logging
+logger:
+  level: INFO
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: ""
+
+ota:
+  password: ""
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+web_server:
+  port: 80
+
+substitutions:
+  name: froeling
+  modbus_controller_id: froeling
+
+uart:
+  - id: uartfroeling
+    tx_pin: 15
+    rx_pin: 13
+    baud_rate: 57600
+    data_bits: 8
+    stop_bits: 1
+    parity: NONE
+    #debug:
+
+modbus:
+  id: modbus1
+  uart_id: uartfroeling
+
+modbus_controller:
+  - id: froeling
+    address: 2
+    modbus_id: modbus1
+    setup_priority: -10
+    update_interval: "8s"
+    command_throttle: "50ms"
+
+globals:
+  - id: debug_address
+    type: int
+    restore_value: yes
+    initial_value: '0'
+
+switch:
+  - platform: restart
+    name: "Restart wemos-d1-froeling"
+
+sensor:
+  ##### Kessel #####
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Kesseltemperatur"
+    id:  ${name}_Kesseltemperatur
+    register_type: read
+    address: 0
+    unit_of_measurement: "°C"
+    accuracy_decimals: 1
+    value_type: U_WORD 
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Abgastemperatur"
+    id:  ${name}_Abgastemperatur
+    register_type: read
+    address: 1
+    unit_of_measurement: "°C"
+    accuracy_decimals: 1
+    value_type: U_WORD 
+ 
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Verbleibende Heizstunden bis zur Asche entleeren Warnung"
+    id:  ${name}_Verbleibende_Heizstunden_bis_zur_Asche_entleeren_Warnung
+    register_type: read
+    address: 86
+    unit_of_measurement: "h"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Saugzug - Ansteuerung"
+    id:  ${name}_Saugzug_Ansteuerung
+    register_type: read
+    address: 75
+    unit_of_measurement: "%"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Restsauerstoffgehalt"
+    id:  ${name}_Restsauerstoffgehalt
+    register_type: read
+    address: 3
+    unit_of_measurement: "%"
+    accuracy_decimals: 1
+    value_type: U_WORD
+    filters:
+      - multiply: 0.1
+  
+  ##### Heizkörper HK1 #####
+  # - platform: modbus_controller
+  #   modbus_controller_id: ${modbus_controller_id}
+  #   name: "${name}-HK1 - Vorlauf-Isttemperatur"
+  #   id:  ${name}_HK1_Vorlauf_Isttemperatur
+  #   register_type: read
+  #   address: 1030
+  #   unit_of_measurement: "°C"
+  #   value_type: U_WORD
+  #   filters:
+  #     - multiply: 0.5
+
+  # - platform: modbus_controller
+  #   modbus_controller_id: ${modbus_controller_id}
+  #   name: "${name}-HK1 - Vorlauf-Solltemperatur"
+  #   id:  ${name}_HK1_Vorlauf_Solltemperatur
+  #   register_type: read
+  #   address: 1031
+  #   unit_of_measurement: "°C"
+  #   value_type: U_WORD
+  #   filters:
+  #     - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Aussentemperatur"
+    id:  ${name}_Aussentemperatur
+    register_type: read
+    address: 1000
+    unit_of_measurement: "°C"
+    value_type: U_WORD
+    filters:
+      - multiply: 0.5
+
+  ##### Boiler 1 #####
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Boiler 1 Temperatur oben"
+    id:  ${name}_Boiler_1_Temperatur_oben
+    register_type: read
+    address: 1630
+    unit_of_measurement: "°C"
+    value_type: U_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Boiler 1 Pumpe Ansteuerung"
+    id:  ${name}_Boiler_1_Pumpe_Ansteuerung
+    register_type: read
+    address: 1632
+    unit_of_measurement: "%"
+    value_type: U_WORD
+
+  ##### Puffer 1 #####
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Puffer 1 Temperatur oben"
+    id:  ${name}_Puffer_1_Temperatur_oben
+    register_type: read
+    address: 2000
+    unit_of_measurement: "°C"
+    value_type: U_WORD  
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Puffer 1 Temperatur mitte"
+    id:  ${name}_Puffer_1_Temperatur_mitte
+    register_type: read
+    address: 2001
+    unit_of_measurement: "°C"
+    value_type: U_WORD  
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Puffer 1 Temperatur unten"
+    id:  ${name}_Puffer_1_Temperatur_unten
+    register_type: read
+    address: 2002
+    unit_of_measurement: "°C"
+    value_type: U_WORD  
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Puffer 1 Ladezustand"
+    id:  ${name}_Puffer_1_Ladezustand
+    register_type: read
+    address: 2006
+    unit_of_measurement: "%"
+    value_type: U_WORD  
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Puffer 1 Pufferpumpen Ansteuerung"
+    id:  ${name}_Puffer_1_Pufferpumpen_Ansteuerung
+    register_type: read
+    address: 2003
+    unit_of_measurement: "%"
+    value_type: U_WORD  
+
+  ##### Austragung #####
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Fuellstand im Pelletsbehaelter"
+    id:  ${name}_Fuellstand_im_Pelletsbehaelter
+    register_type: read
+    address: 21
+    unit_of_measurement: "%"
+    accuracy_decimals: 1
+    value_type: U_WORD
+    filters:
+      - multiply: 0.0048309178743961
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Resetierbarer kg-Zaehler"
+    id:  ${name}_Resetierbarer_kg_Zaehler
+    register_type: read
+    address: 81
+    unit_of_measurement: "kg"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Resetierbarer t-Zaehler"
+    id:  ${name}_Resetierbarer_t_Zaehler
+    register_type: read
+    address: 82
+    unit_of_measurement: "t"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Pelletverbrauch Gesamt"
+    id:  ${name}_Pelletverbrauch_Gesamt
+    register_type: read
+    address: 83
+    unit_of_measurement: "t"
+    accuracy_decimals: 1
+    value_type: U_WORD
+    filters:
+      - multiply: 0.1
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name}-Pelletlager Restbestand"
+    id:  ${name}_Pelletlager_Restbestand
+    register_type: holding
+    address: 319
+    unit_of_measurement: "t"
+    accuracy_decimals: 1
+    value_type: U_WORD
+    filters:
+      - multiply: 0.1
+  
+  ##### Zirkulations Pumpe #####
+  # - platform: modbus_controller
+  #   modbus_controller_id: ${modbus_controller_id}
+  #   name: "${name}-Ruecklauftemperatur an der Zirkulations Leitung"
+  #   id:  ${name}_Ruecklauftemperatur_an_der_Zirkulations_Leitung
+  #   register_type: holding
+  #   address: 711
+  #   unit_of_measurement: "°C"
+  #   value_type: U_WORD
+  #   filters:
+  #     - multiply: 0.5
+
+  # - platform: modbus_controller
+  #   modbus_controller_id: ${modbus_controller_id}
+  #   name: "${name}-Drehzahl der Zirkulations Pumpe"
+  #   id:  ${name}_Drehzahl_der_Zirkulations_Pumpe
+  #   register_type: holding
+  #   address: 710
+  #   unit_of_measurement: "%"
+  #   value_type: U_WORD