# Das ist eine Kombination aus 27 Commits.

# Das ist die erste Commit-Beschreibung:

update

# Das ist Commit-Beschreibung #2:

Test Name

# Das ist Commit-Beschreibung #3:

asd

# Das ist Commit-Beschreibung #4:

asd

# Das ist Commit-Beschreibung #5:

rename

# Das ist Commit-Beschreibung #6:

asd

# Das ist Commit-Beschreibung #7:

asd

# Das ist Commit-Beschreibung #8:

sdfg

# Das ist Commit-Beschreibung #9:

typo

# Das ist Commit-Beschreibung #10:

typo

# Das ist Commit-Beschreibung #11:

c header

# Das ist Commit-Beschreibung #12:

asdf

# Das ist Commit-Beschreibung #13:

error

# Das ist Commit-Beschreibung #14:

fehler

# Das ist Commit-Beschreibung #15:

update example

# Das ist Commit-Beschreibung #16:

asd

# Das ist Commit-Beschreibung #17:

sdf

# Das ist Commit-Beschreibung #18:

xcv

# Das ist Commit-Beschreibung #19:

adsf

# Das ist Commit-Beschreibung #20:

adress

# Das ist Commit-Beschreibung #21:

dfas

# Das ist Commit-Beschreibung #22:

Singed Values Temperature

# Das ist Commit-Beschreibung #23:

asd

# Das ist Commit-Beschreibung #24:

ü

# Das ist Commit-Beschreibung #25:

asd

# Das ist Commit-Beschreibung #26:

Change id

# Das ist Commit-Beschreibung #27:

entferne unbenutzte werte

anlage.yaml

@@ -2,7 +2,7 @@ text_sensor:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
     name: "${name} Anlagenzustand"
-    id: ${name}_Anlagenzustand
+    id: ${lower_name}_Anlagenzustand
     register_type: read
     address: 4000
     raw_encode: HEXBYTES

austragung.yaml

@@ -2,7 +2,7 @@ sensor:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
     name: "${name} Fuellstand im Pelletsbehaelter"
-    id: ${name}_Fuellstand_im_Pelletsbehaelter
+    id: ${lower_name}_Fuellstand_im_Pelletsbehaelter
     register_type: read
     address: 21
     unit_of_measurement: "%"
@@ -14,7 +14,7 @@ sensor:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
     name: "${name} Resetierbarer kg-Zaehler"
-    id: ${name}_Resetierbarer_kg_Zaehler
+    id: ${lower_name}_Resetierbarer_kg_Zaehler
     register_type: read
     address: 81
     unit_of_measurement: "kg"
@@ -23,7 +23,7 @@ sensor:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
     name: "${name} Resetierbarer t-Zaehler"
-    id: ${name}_Resetierbarer_t_Zaehler
+    id: ${lower_name}_Resetierbarer_t_Zaehler
     register_type: read
     address: 82
     unit_of_measurement: "t"
@@ -32,7 +32,7 @@ sensor:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
     name: "${name} Pelletverbrauch Gesamt"
-    id: ${name}_Pelletverbrauch_Gesamt
+    id: ${lower_name}_Pelletverbrauch_Gesamt
     register_type: read
     address: 83
     unit_of_measurement: "t"
@@ -44,7 +44,7 @@ sensor:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
     name: "${name} Pelletlager Restbestand"
-    id: ${name}_Pelletlager_Restbestand
+    id: ${lower_name}_Pelletlager_Restbestand
     register_type: holding
     address: 319
     unit_of_measurement: "t"

boiler_01.yaml

@@ -1,19 +1,19 @@
 sensor:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Boiler 1 Temperatur oben"
+    name: "${boiler1_name} Temperatur oben"
-    id: ${name}_Boiler_1_Temperatur_oben
+    id: ${lower_name}_Boiler_1_Temperatur_oben
     register_type: read
     address: 1630
     unit_of_measurement: "°C"
-    value_type: U_WORD
+    value_type: S_WORD
     filters:
       - multiply: 0.5
 
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Boiler 1 Pumpe Ansteuerung"
+    name: "${boiler1_name} Pumpe Ansteuerung"
-    id: ${name}_Boiler_1_Pumpe_Ansteuerung
+    id: ${lower_name}_Boiler_1_Pumpe_Ansteuerung
     register_type: read
     address: 1632
     unit_of_measurement: "%"
@@ -22,32 +22,32 @@ sensor:
 number:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Boiler 1 Gewünschte Boilertemperatur"
+    name: "${boiler1_name} Gewünschte Boilertemperatur"
-    id: ${name}_Boiler_1_Gewuenschte_Boilertemperatur
+    id: ${lower_name}_Boiler_1_Gewuenschte_Boilertemperatur
     address: 1631
     unit_of_measurement: "°C"
-    value_type: U_WORD
+    value_type: S_WORD
     multiply: 2
     min_value: 10
     max_value: 100
 
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Boiler 1 Nachladen, wenn Boilertemperatur unter"
+    name: "${boiler1_name} Nachladen, wenn Boilertemperatur unter"
-    id: ${name}_Boiler_1_Nachladen_wenn_Boilertemperatur_unter
+    id: ${lower_name}_Boiler_1_Nachladen_wenn_Boilertemperatur_unter
     address: 1632
     unit_of_measurement: "°C"
-    value_type: U_WORD
+    value_type: S_WORD
     multiply: 2
     min_value: 1
     max_value: 90
 
 binary_sensor:
   - platform: template
-    name: "${name} Boiler 1 Pumpe Ansteuerung AN AUS"
+    name: "${boiler1_name} Pumpe Ansteuerung AN AUS"
-    id: ${name}_Boiler_1_Pumpe_Ansteuerung_AN_AUS
+    id: ${lower_name}_Boiler_1_Pumpe_Ansteuerung_AN_AUS
     lambda: |-
-      if (id(${name}_Boiler_1_Pumpe_Ansteuerung).state > 0) {
+      if (id(${lower_name}_Boiler_1_Pumpe_Ansteuerung).state > 0) {
         return true;
       } else {
         return false;

froeling.yaml

@@ -26,181 +26,60 @@ web_server:
 
 substitutions:
   name: froeling
-  modbus_controller_id: froeling
+  friendly_name: Fröhling
+  device_description: "Esphome component for Fröhling Lambdatronic S3200"
+  modbus_controller_id: lambdatronic
+  hk1_name: "HK1"
+  hk2_name: "HK2"
+  hk3_name: "Erdgeschoss"
+  hk4_name: "1. Stock"
+  hk5_name: "2. Stock"
+  boiler1_name: "Warmwasser"
+  puffer1_name: "Puffer"
 
 uart:
-  - id: uartfroeling
+  id: mod_bus
-
+  tx_pin: 17
-    tx_pin: 1
+  rx_pin: 16
-    rx_pin: 3
+  baud_rate: 57600
-    baud_rate: 57600
+  data_bits: 8
-    data_bits: 8
+  stop_bits: 1
-    stop_bits: 1
+  parity: NONE
-    parity: NONE
+#  debug:
+#    direction: BOTH
 
 modbus:
   id: modbus1
-  uart_id: uartfroeling
+  uart_id: mod_bus
 
 modbus_controller:
-  - id: froeling
+  id: ${modbus_controller_id}
-    address: 2
+  address: 0x1
-    modbus_id: modbus1
+  modbus_id: modbus1
-    setup_priority: -10
+  setup_priority: -10
-    update_interval: "60s"
+  update_interval: 10sec
-    command_throttle: "50ms"
+
 
 switch:
   - platform: restart
     name: "Restart ESP"
 
 packages:
+  # Git repo examples
   remote_package:
-    url: https://github.com/GyroGearl00se/ESPHome-Froeling-Lambdatronic_3200
+    url: https://git.floriansimmer.at/Florian/Lambdatronic_S3200
+    refresh: 0s
     ref: main
-    files: [austragung.yaml, boiler_01.yaml, heizkoerper.yaml, kessel.yaml, puffer_01.yaml, zirkulationspumpe.yaml]
+    files: 
-    refresh: 1d
+      - anlage.yaml
-    
+      - kessel.yaml
-number:
+      - fehler.yaml
-  - platform: modbus_controller
+      - austragung.yaml
-    modbus_controller_id: ${modbus_controller_id}
+      - boiler_01.yaml
-    name: "${name} Bei welcher RL Temperatur an der Zirkulationsleitung soll die Pumpe ausschalten"
+      - heizkreis_01.yaml
-    id: ${name}_Bei_welcher_RL_Temperatur_an_der_Zirkulationsleitung_soll_die_Pumpe_ausschalten
+      - heizkreis_02.yaml
-    address: 600
+      - heizkreis_03.yaml
-    unit_of_measurement: "°C"
+      - heizkreis_04.yaml
-    value_type: U_WORD
+      - heizkreis_05.yaml
-    multiply: 2
+      - puffer_01.yaml
-    min_value: 20
+      - zirkulationspumpe.yaml
-    max_value: 120
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Kessel-Solltemperatur"
-    id: ${name}_Kessel_Solltemperatur
-    address: 0
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    multiply: 2
-    min_value: 70
-    max_value: 90
-
-text_sensor:
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Anlagenzustand"
-    id: ${name}_Anlagenzustand
-    register_type: read
-    address: 4000
-    raw_encode: HEXBYTES
-    lambda: |-
-      uint16_t value = modbus_controller::word_from_hex_str(x, 0);
-      switch (value) {
-        case 0: return std::string("Dauerlast");
-        case 1: return std::string("Brauchwasser");
-        case 2: return std::string("Automatik");
-        case 3: return std::string("Scheitholzbetrieb");
-        case 4: return std::string("Reinigen");
-        case 5: return std::string("Ausgeschaltet");
-        case 6: return std::string("Extraheizen");
-        case 7: return std::string("Kaminkehrer");
-        case 8: return std::string("Reinigen");
-        default: return std::string("----");
-      }
-      return x;
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Kesselzustand"
-    id: ${name}_Kesselzustand
-    register_type: read
-    address: 4001
-    raw_encode: HEXBYTES
-    lambda: |-
-      uint16_t value = modbus_controller::word_from_hex_str(x, 0);
-      switch (value) {
-        case 0: return std::string("STÖRUNG");
-        case 1: return std::string("Kessel Aus");
-        case 2: return std::string("Anheizen");
-        case 3: return std::string("Heizen");
-        case 4: return std::string("Feuererhaltung");
-        case 5: return std::string("Feuer Aus");
-        case 6: return std::string("Tür offen");
-        case 7: return std::string("Vorbereitung");
-        case 8: return std::string("Vorwärmen");
-        case 9: return std::string("Zünden");
-        case 10: return std::string("Abstellen Warten");
-        case 11: return std::string("Abstellen Warten1");
-        case 12: return std::string("Abstellen Einschub1");
-        case 13: return std::string("Abstellen Warten2");
-        case 14: return std::string("Abstellen Einschub2");
-        case 15: return std::string("Abreinigen");
-        case 16: return std::string("2h warten");
-        case 17: return std::string("Saugen / Heizen");
-        case 18: return std::string("Fehlzündung");
-        case 19: return std::string("Betriebsbereit");
-        case 20: return std::string("Rost schließen");
-        case 21: return std::string("Stoker leeren");
-        case 22: return std::string("Vorheizen");
-        case 23: return std::string("Saugen");
-        case 24: return std::string("RSE schließen");
-        case 25: return std::string("RSE öffnen");
-        case 26: return std::string("Rost kippen");
-        case 27: return std::string("Vorwärmen-Zünden");
-        case 28: return std::string("Resteinschub");
-        case 29: return std::string("Stoker auffüllen");
-        case 30: return std::string("Lambdasonde aufheizen");
-        case 31: return std::string("Gebläsenachlauf I");
-        case 32: return std::string("Gebläsenachlauf II");
-        case 33: return std::string("Abgestellt");
-        case 34: return std::string("Nachzünden");
-        case 35: return std::string("Zünden Warten");
-        case 36: return std::string("FB: RSE schließen");
-        case 37: return std::string("FB: Kessel belüften");
-        case 38: return std::string("FB: Zünden");
-        case 39: return std::string("FB: min. Einschub");
-        case 40: return std::string("RSE schließen");
-        case 41: return std::string("STÖRUNG: STB/NA");
-        case 42: return std::string("STÖRUNG: Kipprost");
-        case 43: return std::string("STÖRUNG: FR-Überdr.");
-        case 44: return std::string("STÖRUNG: Türkont.");
-        case 45: return std::string("STÖRUNG: Saugzug");
-        case 46: return std::string("STÖRUNG: Umfeld");
-        case 47: return std::string("FEHLER: STB/NA");
-        case 48: return std::string("FEHLER: Kipprost");
-        case 49: return std::string("FEHLER: FR-Überdr.");
-        case 50: return std::string("FEHLER: Türkont.");
-        case 51: return std::string("FEHLER: Saugzug");
-        case 52: return std::string("FEHLER: Umfeld");
-        case 53: return std::string("FEHLER: Stoker");
-        case 54: return std::string("STÖRUNG: Stoker");
-        case 55: return std::string("FB: Stoker leeren");
-        case 56: return std::string("Vorbelüften");
-        case 57: return std::string("STÖRUNG: Hackgut");
-        case 58: return std::string("FEHLER: Hackgut");
-        case 59: return std::string("NB: Tür offen");
-        case 60: return std::string("NB: Anheizen");
-        case 61: return std::string("NB: Heizen");
-        case 62: return std::string("FEHLER: STB/NA");
-        case 63: return std::string("FEHLER: Allgemein");
-        case 64: return std::string("NB: Feuer Aus");
-        case 65: return std::string("Selbsttest aktiv");
-        case 66: return std::string("Fehlerbeh. 20min");
-        case 67: return std::string("FEHLER: Fallschacht");
-        case 68: return std::string("STÖRUNG: Fallschacht");
-        case 69: return std::string("Reinigen möglich");
-        case 70: return std::string("Heizen - Reinigen");
-        case 71: return std::string("SH Anheizen");
-        case 72: return std::string("SH Heizen");
-        case 73: return std::string("SH Heiz/Abstell");
-        case 74: return std::string("STÖRUNG sicher");
-        case 75: return std::string("AGR Nachlauf");
-        case 76: return std::string("AGR reinigen");
-        case 77: return std::string("Zündung AUS");
-        case 78: return std::string("Filter reinigen");
-        case 79: return std::string("Anheizassistent");
-        case 80: return std::string("SH Zünden");
-        case 81: return std::string("SH Störung");
-        case 82: return std::string("Sensorcheck");
-        default: return std::string("----");
-      }
-      return x;

heizkoerper.yaml

@@ -1,132 +0,0 @@
-sensor:
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} HK1 - Vorlauf-Isttemperatur"
-    id: ${name}_HK1_Vorlauf_Isttemperatur
-    register_type: read
-    address: 1030 #Wrong ?
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    filters:
-      - multiply: 0.5
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} HK1 - Vorlauf-Solltemperatur"
-    id: ${name}_HK1_Vorlauf_Solltemperatur
-    register_type: read
-    address: 1031 #Wrong ?
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    filters:
-      - multiply: 0.5
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Aussentemperatur"
-    id: ${name}_Aussentemperatur
-    register_type: read
-    address: 1000
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    filters:
-      - multiply: 0.5
-
-binary_sensor:
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} HK1 - Pumpe AN AUS"
-    id: ${name}_HK1_Pumpe_AN_AUS
-    register_type: coil
-    #address: 999 # Heizkreispumpe 0
-    address: 1029 # Heizkreispumpe 1 - wrong ?
-
-number:
-  # not correct yet ?
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} HK1 - Gewünschte Vorlauf-temperatur bei -10°C Außentemperatur"
-    id: ${name}_HK1_Vorlauf_Temperatur_minus_10C_Aussentemperatur
-    address: 1032
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    multiply: 2
-    min_value: 10
-    max_value: 110
-
-  # not correct yet ?
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} HK1 - Gewünschte Vorlauf-temperatur bei +10°C Außentemperatur"
-    id: ${name}_HK1_Vorlauf_Temperatur_10C_Aussentemperatur
-    address: 1031
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    multiply: 2
-    min_value: 10
-    max_value: 110
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} HK1 - Heizkreispumpe ausschalten wenn Vorlauf Soll kleiner ist als"
-    id: ${name}_HK1_Heizkreispumpe_ausschalten_wenn_Vorlauf_Soll_kleiner_ist_als
-    address: 1039
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    multiply: 2
-    min_value: 10
-    max_value: 30
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} HK1 - Absenkung der Vorlauftemperatur im Absenkbetrieb"
-    id: ${name}_HK1_Absenkung_der_Vorlauftemperatur_im_Absenkbetrieb
-    address: 1033
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    multiply: 2
-    min_value: 0
-    max_value: 70
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} HK1 - Außentemperatur, unter der die Heizkreispumpe im Heizbetrieb einschaltet"
-    id: ${name}_HK1_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Heizbetrieb_einschaltet
-    address: 1036
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    multiply: 2
-    min_value: -20
-    max_value: 50
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} HK1 - Außentemperatur, unter der die Heizkreispumpe im Absenkbetrieb einschaltet"
-    id: ${name}_HK1_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Absenkbetrieb_einschaltet
-    address: 1037
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    multiply: 2
-    min_value: -20
-    max_value: 50
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} HK1 - Frostschutztemperatur"
-    id: ${name}_HK1_Frostschutztemperatur
-    address: 1038
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    multiply: 2
-    min_value: -10
-    max_value: 20
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} HK1 - Temp. am Puffer oben ab der der Überhitzungsschutz aktiv wird"
-    id: ${name}_HK1_Temp_am_Puffer_oben_ab_der_der_Ueberhitzungsschutz_aktiv_wird
-    address: 1047
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    min_value: 60
-    max_value: 120

heizkreis_01.yaml

@@ -0,0 +1,168 @@
+select:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Betriebsart"
+    id: ${lower_name}_HK1_Betriebsart
+    address: 8046
+    value_type: U_WORD
+    optionsmap:
+      "Aus": 0
+      "Automatik": 1
+      "Extraheizen": 2
+      "Absenken": 3
+      "Dauerabsenken": 4
+      "Partybetrieb": 5
+
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Vorlauf-Isttemperatur"
+    id: ${lower_name}_HK1_Vorlauf_Isttemperatur
+    register_type: read
+    address: 1030 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Vorlauf-Solltemperatur"
+    id: ${lower_name}_HK1_Vorlauf_Solltemperatur
+    register_type: read
+    address: 1031 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Raumtemperatur"
+    id: ${lower_name}_HK1_Raumtemperatur
+    register_type: read
+    address: 1032 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+binary_sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Pumpe AN AUS"
+    id: ${lower_name}_HK1_Pumpe_AN_AUS
+    register_type: coil
+    address: 1029 
+
+number:
+  # not correct yet ?
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Gewünschte Vorlauf-temperatur bei -10°C Außentemperatur"
+    id: ${lower_name}_HK1_Vorlauf_Temperatur_minus_10C_Aussentemperatur
+    address: 1032
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 110
+
+  # not correct yet ?
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Gewünschte Vorlauf-temperatur bei +10°C Außentemperatur"
+    id: ${lower_name}_HK1_Vorlauf_Temperatur_10C_Aussentemperatur
+    address: 1031
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 110
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Heizkreispumpe ausschalten wenn Vorlauf Soll kleiner ist als"
+    id: ${lower_name}_HK1_Heizkreispumpe_ausschalten_wenn_Vorlauf_Soll_kleiner_ist_als
+    address: 1039
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Absenkung der Vorlauftemperatur im Absenkbetrieb"
+    id: ${lower_name}_HK1_Absenkung_der_Vorlauftemperatur_im_Absenkbetrieb
+    address: 1033
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 0
+    max_value: 70
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Gewünschte Raumtemperatur während des Heizbetriebs"
+    id: ${lower_name}_HK1_Gewuenschte_Raumtemperatur_waehrend_des_Heizbetriebs
+    address: 1035
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Gewünschte Raumtemperatur während des Absenkbetriebes"
+    id: ${lower_name}_HK1_Gewuenschte_Raumtemperatur_waehrend_des_Absenkbetriebes
+    address: 1040
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Außentemperatur, unter der die Heizkreispumpe im Heizbetrieb einschaltet"
+    id: ${lower_name}_HK1_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Heizbetrieb_einschaltet
+    address: 1036
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -20
+    max_value: 50
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Außentemperatur, unter der die Heizkreispumpe im Absenkbetrieb einschaltet"
+    id: ${lower_name}_HK1_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Absenkbetrieb_einschaltet
+    address: 1037
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -20
+    max_value: 50
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Frostschutztemperatur"
+    id: ${lower_name}_HK1_Frostschutztemperatur
+    address: 1038
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -10
+    max_value: 20
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk1_name} - Temp. am Puffer oben ab der der Überhitzungsschutz aktiv wird"
+    id: ${lower_name}_HK1_Temp_am_Puffer_oben_ab_der_der_Ueberhitzungsschutz_aktiv_wird
+    address: 1047
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    min_value: 60
+    max_value: 120

heizkreis_02.yaml

@@ -0,0 +1,168 @@
+select:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Betriebsart"
+    id: ${lower_name}_HK2_Betriebsart
+    address: 8047
+    value_type: U_WORD
+    optionsmap:
+      "Aus": 0
+      "Automatik": 1
+      "Extraheizen": 2
+      "Absenken": 3
+      "Dauerabsenken": 4
+      "Partybetrieb": 5
+
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Vorlauf-Isttemperatur"
+    id: ${lower_name}_HK2_Vorlauf_Isttemperatur
+    register_type: read
+    address: 1060 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Vorlauf-Solltemperatur"
+    id: ${lower_name}_HK2_Vorlauf_Solltemperatur
+    register_type: read
+    address: 1061 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Raumtemperatur"
+    id: ${lower_name}_HK2_Raumtemperatur
+    register_type: read
+    address: 1062 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+binary_sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Pumpe AN AUS"
+    id: ${lower_name}_HK2_Pumpe_AN_AUS
+    register_type: coil
+    address: 1059
+
+number:
+  # not correct yet ?
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Gewünschte Vorlauf-temperatur bei +10°C Außentemperatur"
+    id: ${lower_name}_HK2_Vorlauf_Temperatur_10C_Aussentemperatur
+    address: 1061
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 110
+
+  # not correct yet ?
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Gewünschte Vorlauf-temperatur bei -10°C Außentemperatur"
+    id: ${lower_name}_HK2_Vorlauf_Temperatur_minus_10C_Aussentemperatur
+    address: 1062
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 110
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Absenkung der Vorlauftemperatur im Absenkbetrieb"
+    id: ${lower_name}_HK2_Absenkung_der_Vorlauftemperatur_im_Absenkbetrieb
+    address: 1063
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 0
+    max_value: 70
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Heizkreispumpe ausschalten wenn Vorlauf Soll kleiner ist als"
+    id: ${lower_name}_HK2_Heizkreispumpe_ausschalten_wenn_Vorlauf_Soll_kleiner_ist_als
+    address: 1069
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Gewünschte Raumtemperatur während des Heizbetriebs"
+    id: ${lower_name}_HK2_Gewuenschte_Raumtemperatur_waehrend_des_Heizbetriebs
+    address: 1065
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Gewünschte Raumtemperatur während des Absenkbetriebes"
+    id: ${lower_name}_HK2_Gewuenschte_Raumtemperatur_waehrend_des_Absenkbetriebes
+    address: 1070
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Außentemperatur, unter der die Heizkreispumpe im Heizbetrieb einschaltet"
+    id: ${lower_name}_HK2_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Heizbetrieb_einschaltet
+    address: 1066
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -20
+    max_value: 50
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Außentemperatur, unter der die Heizkreispumpe im Absenkbetrieb einschaltet"
+    id: ${lower_name}_HK2_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Absenkbetrieb_einschaltet
+    address: 1067
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -20
+    max_value: 50
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Frostschutztemperatur"
+    id: ${lower_name}_HK2_Frostschutztemperatur
+    address: 1068
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -10
+    max_value: 20
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk2_name} - Temp. am Puffer oben ab der der Überhitzungsschutz aktiv wird"
+    id: ${lower_name}_HK2_Temp_am_Puffer_oben_ab_der_der_Ueberhitzungsschutz_aktiv_wird
+    address: 1078
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    min_value: 60
+    max_value: 120

heizkreis_03.yaml

@@ -0,0 +1,168 @@
+select:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Betriebsart"
+    id: ${lower_name}_HK3_Betriebsart
+    address: 8048
+    value_type: U_WORD
+    optionsmap:
+      "Aus": 0
+      "Automatik": 1
+      "Extraheizen": 2
+      "Absenken": 3
+      "Dauerabsenken": 4
+      "Partybetrieb": 5
+
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Vorlauf-Isttemperatur"
+    id: ${lower_name}_HK3_Vorlauf_Isttemperatur
+    register_type: read
+    address: 1090 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Vorlauf-Solltemperatur"
+    id: ${lower_name}_HK3_Vorlauf_Solltemperatur
+    register_type: read
+    address: 1091 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Raumtemperatur"
+    id: ${lower_name}_HK3_Raumtemperatur
+    register_type: read
+    address: 1092 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+binary_sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Pumpe AN AUS"
+    id: ${lower_name}_HK3_Pumpe_AN_AUS
+    register_type: coil
+    address: 1090 
+
+number:
+  # not correct yet ?
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Gewünschte Vorlauf-temperatur bei +10°C Außentemperatur"
+    id: ${lower_name}_HK3_Vorlauf_Temperatur_10C_Aussentemperatur
+    address: 1091
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 110
+
+  # not correct yet ?
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Gewünschte Vorlauf-temperatur bei -10°C Außentemperatur"
+    id: ${lower_name}_HK3_Vorlauf_Temperatur_minus_10C_Aussentemperatur
+    address: 1092
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 110
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Absenkung der Vorlauftemperatur im Absenkbetrieb"
+    id: ${lower_name}_HK3_Absenkung_der_Vorlauftemperatur_im_Absenkbetrieb
+    address: 1093
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 0
+    max_value: 70
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Heizkreispumpe ausschalten wenn Vorlauf Soll kleiner ist als"
+    id: ${lower_name}_HK3_Heizkreispumpe_ausschalten_wenn_Vorlauf_Soll_kleiner_ist_als
+    address: 1099
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Gewünschte Raumtemperatur während des Heizbetriebs"
+    id: ${lower_name}_HK3_Gewuenschte_Raumtemperatur_waehrend_des_Heizbetriebs
+    address: 1095
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Gewünschte Raumtemperatur während des Absenkbetriebes"
+    id: ${lower_name}_HK3_Gewuenschte_Raumtemperatur_waehrend_des_Absenkbetriebes
+    address: 1100
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Außentemperatur, unter der die Heizkreispumpe im Heizbetrieb einschaltet"
+    id: ${lower_name}_HK3_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Heizbetrieb_einschaltet
+    address: 1096
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -20
+    max_value: 50
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Außentemperatur, unter der die Heizkreispumpe im Absenkbetrieb einschaltet"
+    id: ${lower_name}_HK3_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Absenkbetrieb_einschaltet
+    address: 1097
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -20
+    max_value: 50
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Frostschutztemperatur"
+    id: ${lower_name}_HK3_Frostschutztemperatur
+    address: 1098
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -10
+    max_value: 20
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk3_name} - Temp. am Puffer oben ab der der Überhitzungsschutz aktiv wird"
+    id: ${lower_name}_HK3_Temp_am_Puffer_oben_ab_der_der_Ueberhitzungsschutz_aktiv_wird
+    address: 1105
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    min_value: 60
+    max_value: 120

heizkreis_04.yaml

@@ -0,0 +1,168 @@
+select:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Betriebsart"
+    id: ${lower_name}_HK4_Betriebsart
+    address: 8049
+    value_type: U_WORD
+    optionsmap:
+      "Aus": 0
+      "Automatik": 1
+      "Extraheizen": 2
+      "Absenken": 3
+      "Dauerabsenken": 4
+      "Partybetrieb": 5
+
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Vorlauf-Isttemperatur"
+    id: ${lower_name}_HK4_Vorlauf_Isttemperatur
+    register_type: read
+    address: 1120 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Vorlauf-Solltemperatur"
+    id: ${lower_name}_HK4_Vorlauf_Solltemperatur
+    register_type: read
+    address: 1121 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Raumtemperatur"
+    id: ${lower_name}_HK4_Raumtemperatur
+    register_type: read
+    address: 1122 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+binary_sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Pumpe AN AUS"
+    id: ${lower_name}_HK4_Pumpe_AN_AUS
+    register_type: coil
+    address: 1120
+
+number:
+  # not correct yet ?
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Gewünschte Vorlauf-temperatur bei +10°C Außentemperatur"
+    id: ${lower_name}_HK4_Vorlauf_Temperatur_10C_Aussentemperatur
+    address: 1121
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 110
+
+  # not correct yet ?
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Gewünschte Vorlauf-temperatur bei -10°C Außentemperatur"
+    id: ${lower_name}_HK4_Vorlauf_Temperatur_minus_10C_Aussentemperatur
+    address: 1122
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 110
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Absenkung der Vorlauftemperatur im Absenkbetrieb"
+    id: ${lower_name}_HK4_Absenkung_der_Vorlauftemperatur_im_Absenkbetrieb
+    address: 1123
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 0
+    max_value: 70
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Heizkreispumpe ausschalten wenn Vorlauf Soll kleiner ist als"
+    id: ${lower_name}_HK4_Heizkreispumpe_ausschalten_wenn_Vorlauf_Soll_kleiner_ist_als
+    address: 1129
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Gewünschte Raumtemperatur während des Heizbetriebs"
+    id: ${lower_name}_HK4_Gewuenschte_Raumtemperatur_waehrend_des_Heizbetriebs
+    address: 1125
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Gewünschte Raumtemperatur während des Absenkbetriebes"
+    id: ${lower_name}_HK4_Gewuenschte_Raumtemperatur_waehrend_des_Absenkbetriebes
+    address: 1130
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Außentemperatur, unter der die Heizkreispumpe im Heizbetrieb einschaltet"
+    id: ${lower_name}_HK4_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Heizbetrieb_einschaltet
+    address: 1126
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -20
+    max_value: 50
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Außentemperatur, unter der die Heizkreispumpe im Absenkbetrieb einschaltet"
+    id: ${lower_name}_HK4_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Absenkbetrieb_einschaltet
+    address: 1127
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -20
+    max_value: 50
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Frostschutztemperatur"
+    id: ${lower_name}_HK4_Frostschutztemperatur
+    address: 1128
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -10
+    max_value: 20
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk4_name} - Temp. am Puffer oben ab der der Überhitzungsschutz aktiv wird"
+    id: ${lower_name}_HK4_Temp_am_Puffer_oben_ab_der_der_Ueberhitzungsschutz_aktiv_wird
+    address: 1135
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    min_value: 60
+    max_value: 120

heizkreis_05.yaml

@@ -0,0 +1,168 @@
+select:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Betriebsart"
+    id: ${lower_name}_HK5_Betriebsart
+    address: 8050
+    value_type: U_WORD
+    optionsmap:
+      "Aus": 0
+      "Automatik": 1
+      "Extraheizen": 2
+      "Absenken": 3
+      "Dauerabsenken": 4
+      "Partybetrieb": 5
+
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Vorlauf-Isttemperatur"
+    id: ${lower_name}_HK5_Vorlauf_Isttemperatur
+    register_type: read
+    address: 1150 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Vorlauf-Solltemperatur"
+    id: ${lower_name}_HK5_Vorlauf_Solltemperatur
+    register_type: read
+    address: 1151 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Raumtemperatur"
+    id: ${lower_name}_HK5_Raumtemperatur
+    register_type: read
+    address: 1152 #Wrong ?
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+binary_sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Pumpe AN AUS"
+    id: ${lower_name}_HK5_Pumpe_AN_AUS
+    register_type: coil
+    address: 1150
+
+number:
+  # not correct yet ?
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Gewünschte Vorlauf-temperatur bei +10°C Außentemperatur"
+    id: ${lower_name}_HK5_Vorlauf_Temperatur_10C_Aussentemperatur
+    address: 1151
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 110
+
+  # not correct yet ?
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Gewünschte Vorlauf-temperatur bei -10°C Außentemperatur"
+    id: ${lower_name}_HK5_Vorlauf_Temperatur_minus_10C_Aussentemperatur
+    address: 1152
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 110
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Absenkung der Vorlauftemperatur im Absenkbetrieb"
+    id: ${lower_name}_HK5_Absenkung_der_Vorlauftemperatur_im_Absenkbetrieb
+    address: 1153
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 0
+    max_value: 70
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Heizkreispumpe ausschalten wenn Vorlauf Soll kleiner ist als"
+    id: ${lower_name}_HK5_Heizkreispumpe_ausschalten_wenn_Vorlauf_Soll_kleiner_ist_als
+    address: 1159
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Gewünschte Raumtemperatur während des Heizbetriebs"
+    id: ${lower_name}_HK5_Gewuenschte_Raumtemperatur_waehrend_des_Heizbetriebs
+    address: 1155
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Gewünschte Raumtemperatur während des Absenkbetriebes"
+    id: ${lower_name}_HK5_Gewuenschte_Raumtemperatur_waehrend_des_Absenkbetriebes
+    address: 1160
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: 10
+    max_value: 30
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Außentemperatur, unter der die Heizkreispumpe im Heizbetrieb einschaltet"
+    id: ${lower_name}_HK5_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Heizbetrieb_einschaltet
+    address: 1156
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -20
+    max_value: 50
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Außentemperatur, unter der die Heizkreispumpe im Absenkbetrieb einschaltet"
+    id: ${lower_name}_HK5_Aussentemperatur_unter_der_die_Heizkreispumpe_im_Absenkbetrieb_einschaltet
+    address: 1157
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -20
+    max_value: 50
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Frostschutztemperatur"
+    id: ${lower_name}_HK5_Frostschutztemperatur
+    address: 1158
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    multiply: 2
+    min_value: -10
+    max_value: 20
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${hk5_name} - Temp. am Puffer oben ab der der Überhitzungsschutz aktiv wird"
+    id: ${lower_name}_HK5_Temp_am_Puffer_oben_ab_der_der_Ueberhitzungsschutz_aktiv_wird
+    address: 1165
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    min_value: 60
+    max_value: 120

kessel.yaml

@@ -1,156 +1,8 @@
-sensor:
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Kesseltemperatur"
-    id: ${name}_Kesseltemperatur
-    register_type: read
-    address: 0
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    filters:
-      - multiply: 0.5
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Abgastemperatur"
-    id: ${name}_Abgastemperatur
-    register_type: read
-    address: 1
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Verbleibende Heizstunden bis zur Asche entleeren Warnung"
-    id: ${name}_Verbleibende_Heizstunden_bis_zur_Asche_entleeren_Warnung
-    register_type: read
-    address: 86
-    unit_of_measurement: "h"
-    value_type: U_WORD
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Saugzug - Ansteuerung"
-    id: ${name}_Saugzug_Ansteuerung
-    register_type: read
-    address: 13
-    unit_of_measurement: "%"
-    value_type: U_WORD
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Saugzugdrehzahl"
-    id: ${name}_Saugzugdrehzahl
-    register_type: read
-    address: 6
-    unit_of_measurement: "rpm"
-    value_type: U_WORD
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Sauerstoffregler"
-    id: ${name}_Sauerstoffregler
-    register_type: read
-    address: 16
-    unit_of_measurement: "%"
-    value_type: U_WORD
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Restsauerstoffgehalt"
-    id: ${name}_Restsauerstoffgehalt
-    register_type: read
-    address: 3
-    unit_of_measurement: "%"
-    accuracy_decimals: 1
-    value_type: U_WORD
-    filters:
-      - multiply: 0.1
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Rücklauffühler"
-    id: ${name}_Ruecklauffuehler
-    register_type: read
-    address: 9
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    filters:
-      - multiply: 0.5
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Primärluft"
-    id: ${name}_Primaerluft
-    register_type: read
-    address: 11
-    unit_of_measurement: "%"
-    value_type: U_WORD
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Sekundärluft"
-    id: ${name}_Sekundaerluft
-    register_type: read
-    address: 12
-    unit_of_measurement: "%"
-    value_type: U_WORD
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Betriebsstunden"
-    id: ${name}_Betriebsstunden
-    register_type: read
-    address: 20
-    unit_of_measurement: "h"
-    value_type: U_WORD
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Stunden seit letzter Wartung"
-    id: ${name}_Stunden_seit_letzter_Wartung
-    register_type: read
-    address: 55
-    unit_of_measurement: "h"
-    value_type: U_WORD
-
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Betriebsstunden in der Feuererhaltung"
-    id: ${name}_Betriebsstunden_in_der_Feuererhaltung
-    register_type: read
-    address: 24
-    unit_of_measurement: "h"
-    value_type: U_WORD
-
-binary_sensor:
-  - platform: template
-    name: "${name} Kesselzustand Heizen"
-    id: ${name}_Kesselzustand_Heizen
-    lambda: |-
-      if (id(${name}_Kesselzustand).state == "Heizen") {
-        return true;
-      } else {
-        return false;
-      }
-
-number:
-  - platform: modbus_controller
-    modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Kessel-Solltemperatur"
-    id: ${name}_Kessel_Solltemperatur
-    address: 0
-    unit_of_measurement: "°C"
-    value_type: U_WORD
-    multiply: 2
-    min_value: 70
-    max_value: 90
-
 text_sensor:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
     name: "${name} Kesselzustand"
-    id: ${name}_Kesselzustand
+    id: ${lower_name}_Kesselzustand
     register_type: read
     address: 4001
     raw_encode: HEXBYTES
@@ -243,3 +95,190 @@ text_sensor:
         default: return std::string("----");
       }
       return x;
+
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Kesseltemperatur"
+    id: ${lower_name}_Kesseltemperatur
+    register_type: read
+    address: 0
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Abgastemperatur"
+    id: ${lower_name}_Abgastemperatur
+    register_type: read
+    address: 1
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Saugzug - Ansteuerung"
+    id: ${lower_name}_Saugzug_Ansteuerung
+    register_type: read
+    address: 13
+    unit_of_measurement: "%"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Saugzugdrehzahl"
+    id: ${lower_name}_Saugzugdrehzahl
+    register_type: read
+    address: 6
+    unit_of_measurement: "rpm"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Sauerstoffregler"
+    id: ${lower_name}_Sauerstoffregler
+    register_type: read
+    address: 16
+    unit_of_measurement: "%"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Restsauerstoffgehalt"
+    id: ${lower_name}_Restsauerstoffgehalt
+    register_type: read
+    address: 3
+    unit_of_measurement: "%"
+    accuracy_decimals: 1
+    value_type: U_WORD
+    filters:
+      - multiply: 0.1
+
+  # - platform: modbus_controller
+  #   modbus_controller_id: ${modbus_controller_id}
+  #   name: "${name} Rücklauffühler"
+  #   id: ${lower_name}_Ruecklauffuehler
+  #   register_type: read
+  #   address: 9
+  #   unit_of_measurement: "°C"
+  #   value_type: S_WORD
+  #   filters:
+  #     - multiply: 0.5
+
+  # - platform: modbus_controller
+  #   modbus_controller_id: ${modbus_controller_id}
+  #   name: "${name} Primärluft"
+  #   id: ${lower_name}_Primaerluft
+  #   register_type: read
+  #   address: 11
+  #   unit_of_measurement: "%"
+  #   value_type: U_WORD
+
+  # - platform: modbus_controller
+  #   modbus_controller_id: ${modbus_controller_id}
+  #   name: "${name} Sekundärluft"
+  #   id: ${lower_name}_Sekundaerluft
+  #   register_type: read
+  #   address: 12
+  #   unit_of_measurement: "%"
+  #   value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Kesselstellgröße"
+    id: ${lower_name}_Kesselstellgroesse
+    register_type: read
+    address: 14
+    unit_of_measurement: "%"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Betriebsstunden"
+    id: ${lower_name}_Betriebsstunden
+    register_type: read
+    address: 20
+    unit_of_measurement: "h"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Anzahl der Brennerstarts"
+    id: ${lower_name}_Anzahl_der_Brennerstarts
+    register_type: read
+    address: 22
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Betriebsstunden in der Feuererhaltung"
+    id: ${lower_name}_Betriebsstunden_in_der_Feuererhaltung
+    register_type: read
+    address: 24
+    unit_of_measurement: "h"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Errechnete Kesselsolltemperatur"
+    id: ${lower_name}_Errechnete_Kesselsolltemperatur
+    register_type: read
+    address: 27
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Stunden seit letzter Wartung"
+    id: ${lower_name}_Stunden_seit_letzter_Wartung
+    register_type: read
+    address: 55
+    unit_of_measurement: "h"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Verbleibende Heizstunden bis zur Asche entleeren Warnung"
+    id: ${lower_name}_Verbleibende_Heizstunden_bis_zur_Asche_entleeren_Warnung
+    register_type: read
+    address: 86
+    unit_of_measurement: "h"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Aussentemperatur"
+    id: ${lower_name}_Aussentemperatur
+    register_type: read
+    address: 1000
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+binary_sensor:
+  - platform: template
+    name: "${name} Kesselzustand Heizen"
+    id: ${lower_name}_Kesselzustand_Heizen
+    lambda: |-
+      if (id(${lower_name}_Kesselzustand).state == "Heizen") {
+        return true;
+      } else {
+        return false;
+      }
+
+number:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Kessel-Solltemperatur"
+    id: ${lower_name}_Kessel_Solltemperatur
+    address: 0
+    unit_of_measurement: "°C"
+    value_type: U_WORD
+    multiply: 2
+    min_value: 40
+    max_value: 90

netzpumpe.yaml

@@ -0,0 +1,31 @@
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Drehzahl Netzpumpe"
+    id: ${lower_name}_Drehzahl_Netzpumpe
+    register_type: read
+    address: 700
+    unit_of_measurement: "%"
+    value_type: U_WORD
+
+  - platform: modbus_controller
+    modbus_controller_id: ${modbus_controller_id}
+    name: "${name} Netzrücklauf Temperatur"
+    id: ${lower_name}_Netzruecklauf_Temperatur 
+    register_type: read
+    address: 701
+    unit_of_measurement: "°C"
+    value_type: S_WORD
+    filters:
+      - multiply: 0.5
+
+binary_sensor:
+  - platform: template
+    name: "${name} Netzpumpe AN AUS"
+    id: ${lower_name}_Netzpumpe_AN_AUS
+    lambda: |-
+      if (id(${lower_name}_Drehzahl_Netzpumpe).state > 0) {
+        return true;
+      } else {
+        return false;
+      }

puffer_01.yaml

@@ -1,41 +1,41 @@
 sensor:  
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Puffer 1 Temperatur oben"
+    name: "${puffer1_name} Temperatur oben"
-    id: ${name}_Puffer_1_Temperatur_oben
+    id: ${lower_name}_Puffer_1_Temperatur_oben
     register_type: read
     address: 2000
     unit_of_measurement: "°C"
-    value_type: U_WORD  
+    value_type: S_WORD  
     filters:
       - multiply: 0.5
 
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Puffer 1 Temperatur mitte"
+    name: "${puffer1_name} Temperatur mitte"
-    id: ${name}_Puffer_1_Temperatur_mitte
+    id: ${lower_name}_Puffer_1_Temperatur_mitte
     register_type: read
     address: 2001
     unit_of_measurement: "°C"
-    value_type: U_WORD  
+    value_type: S_WORD  
     filters:
       - multiply: 0.5
 
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Puffer 1 Temperatur unten"
+    name: "${puffer1_name} Temperatur unten"
-    id: ${name}_Puffer_1_Temperatur_unten
+    id: ${lower_name}_Puffer_1_Temperatur_unten
     register_type: read
     address: 2002
     unit_of_measurement: "°C"
-    value_type: U_WORD  
+    value_type: S_WORD  
     filters:
       - multiply: 0.5
 
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Puffer 1 Ladezustand"
+    name: "${puffer1_name} Ladezustand"
-    id: ${name}_Puffer_1_Ladezustand
+    id: ${lower_name}_Puffer_1_Ladezustand
     register_type: read
     address: 2006
     unit_of_measurement: "%"
@@ -43,8 +43,8 @@ sensor:
 
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
-    name: "${name} Puffer 1 Pufferpumpen Ansteuerung"
+    name: "${puffer1_name} Pufferpumpen Ansteuerung"
-    id: ${name}_Puffer_1_Pufferpumpen_Ansteuerung
+    id: ${lower_name}_Puffer_1_Pufferpumpen_Ansteuerung
     register_type: read
     address: 2003
     unit_of_measurement: "%"
@@ -52,10 +52,10 @@ sensor:
 
 binary_sensor:
   - platform: template
-    name: "${name} Puffer 1 Pufferpumpen Ansteuerung AN AUS"
+    name: "${puffer1_name} Pufferpumpen Ansteuerung AN AUS"
-    id: ${name}_Puffer_1_Pufferpumpen_Ansteuerung_AN_AUS
+    id: ${lower_name}_Puffer_1_Pufferpumpen_Ansteuerung_AN_AUS
     lambda: |-
-      if (id(${name}_Puffer_1_Pufferpumpen_Ansteuerung).state > 0) {
+      if (id(${lower_name}_Puffer_1_Pufferpumpen_Ansteuerung).state > 0) {
         return true;
       } else {
         return false;

zirkulationspumpe.yaml

@@ -2,7 +2,7 @@ sensor:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
     name: "${name} Ruecklauftemperatur an der Zirkulations Leitung"
-    id: ${name}_Ruecklauftemperatur_an_der_Zirkulations_Leitung
+    id: ${lower_name}_Ruecklauftemperatur_an_der_Zirkulations_Leitung
     register_type: read
     address: 711
     unit_of_measurement: "°C"
@@ -13,7 +13,7 @@ sensor:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
     name: "${name} Strömungsschalter an der Brauchwasser Leitung"
-    id: ${name}_Stoemungsschalter_an_der_Brauchwasser_Leitung
+    id: ${lower_name}_Stoemungsschalter_an_der_Brauchwasser_Leitung
     register_type: read
     address: 600
     value_type: U_WORD
@@ -21,7 +21,7 @@ sensor:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
     name: "${name} Drehzahl der Zirkulations Pumpe"
-    id: ${name}_Drehzahl_der_Zirkulations_Pumpe
+    id: ${lower_name}_Drehzahl_der_Zirkulations_Pumpe
     register_type: read
     address: 710
     unit_of_measurement: "%"
@@ -30,9 +30,9 @@ sensor:
 binary_sensor:
   - platform: template
     name: "${name} Zirkulationspumpe AN AUS"
-    id: ${name}_Zirkulations_Pumpe_AN_AUS
+    id: ${lower_name}_Zirkulations_Pumpe_AN_AUS
     lambda: |-
-      if (id(${name}_Drehzahl_der_Zirkulations_Pumpe).state > 0) {
+      if (id(${lower_name}_Drehzahl_der_Zirkulations_Pumpe).state > 0) {
         return true;
       } else {
         return false;
@@ -42,7 +42,7 @@ number:
   - platform: modbus_controller
     modbus_controller_id: ${modbus_controller_id}
     name: "${name} Bei welcher RL Temperatur an der Zirkulationsleitung soll die Pumpe ausschalten"
-    id: ${name}_Bei_welcher_RL_Temperatur_an_der_Zirkulationsleitung_soll_die_Pumpe_ausschalten
+    id: ${lower_name}_Bei_welcher_RL_Temperatur_an_der_Zirkulationsleitung_soll_die_Pumpe_ausschalten
     address: 600
     unit_of_measurement: "°C"
     value_type: U_WORD